POR-15 Semi Gloss Black Quart

    Item #13588ZP

    Details

    POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. The POR 15 primer is sensitive to UV light (sun) and must be top coated for prolonged exposure to sunlight. Top coating is not required for areas not exposed to sunlight.

    About POR-15 Semi Gloss Black Quart

    POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. The POR 15 prep is sensitive to UV light (sun) and must be topcoated for prolonged exposure to sunlight. Topcoating is not required for areas not exposed to sunlight.


    Contents

    32 FL OZ


    Accessories

    POR-15 Metal Ready POR-15 Marine Clean respirator Gloves Eastwood Rust Encapsulator Eastwood Rust Converter Eastwood Chassis Black Eastwood Underhood Black


    Application

    One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


    Safety

    always wear eye, skin and respiratory protection always use in a well ventilated area away from an open flame consult MSDS for specific safety warnings


    Warranty

    MADE IN THE USA NSN # NONE


    Application

    One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


    Customers also viewed:

    Customer Reviews

    4 Item(s)

    per page
    Good Customer Service (Posted on 4/7/2014)
    Review by gary
    Price
    Value
    Quality
    I received the POR 15 and it came damaged and was leaking. I called customer service to let them know the product was not packaged very well. The representative replaced the POR 15 with no further questions and was very polite. I thought that was great service. When I received the new POR 15 it was very well packed and not damage.
    Will never buy again (Posted on 9/2/2013)
    Review by peter
    Quality
    Price
    Value
    I followed all of the instructions, used all of the prep products that I was supposed to only to come out the next day and take my finger and scratch and peel it off like a fruit roll up.
    Tough Stuff - dont sand through (Posted on 7/1/2013)
    Review by David
    Quality
    Price
    Value
    POR-15 is as tough as advertised. I had to buy a new Qt can as the lid was cemented around the inner ring, so be careful opening. Also, be careful when sanding. Once you do break the surface, flakes can curl up leaving a bump that is difficult to remove. I used it to repair the outside of a gas tank, plus a separate POR product for the inside. Worked very well. Recommended.
    Best (Posted on 6/18/2013)
    Review by Gary
    Price
    Value
    Quality
    Great Product, & Better Service-Shipping You Guys R the BEST.

    4 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register