Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces

    Item #10197Z Brand: Eastwood


    Diamond Clear™ for Painted Surfaces adds a semi-gloss/satin finish as it protects your vehicle's newly painted components Use Diamond Clear™ as a top coat for most cured lacquer and enamel paints. Special low-sheen formulation won't offset the "soft" OEM-like finishes of detail paints.
    • Semi-gloss satin finish
    • Resists chips, cracks, fading
    • Withstands up to 300 degrees F

    About Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces

    You've detail-painted your vehicle's components. Now spend a few moments to protect your work. Detail Clear utilizes a special low-sheen formulation that won't offset the "soft" OEM-like finishes of detail paints. It dries fast and resists fading, chipping, cracking. Compatible with most thoroughly cured enamel and lacquer paints.


    One aerosol can 11 oz net wt.


    Only apply to cured surfaces.




    This coating can be applied over most coatings without causing mottling including the metallic finishes we sell. Dries to the touch in 5-10 minutes at humidity 77 degrees F. Fully cured in 48 hours at 77 degrees F at 50% humidity. 55-60% gloss. Can be recoated at any time @77 degrees or warmer, 50% or less humidity. Note: Dry times can vary considerably depending on the substrate being sprayed. The slowest dry time was found to be when sprayed on non-porous, non-treated hardwood, which can take up to 90 minutes to be tack free. Pencil hardness after 48 hour cure @77 degrees F is 6H to 8H.

    Customers also viewed:

    Customer Reviews

    2 Item(s)

    per page
    Exactly What was needed (Posted on 4/15/2014)
    Review by Walter
    Used this product on a wheel repair job that required a satin/semimat finish to match the factory surface. After repairing the damage with matching titanium color paint 4 coats were applied with an airbrush to the area, using 00 steel wool inbetween coats. The result was a repair that was undetectable from 2 feet away in various light angles. Perfect!!
    Great product (Posted on 1/2/2012)
    Review by Hephaestus
    I used this over Krylon Fusion that I used over ABS motorcycle fairings and covers. Its gorgeous and easy to use. I've now painted everything but the tank. I don't know yet how well it behaves subjected to fuel spill. We'll see after my next test.

    I used 3-4 coats per surface. Takes about two cans per fairing. One can for smaller parts.

    Its a solid, thick satin clear, exactly as advertised. Drys for a good sand in about 15 min and finishes to a professional-looking finish in 24. Flexible enough not to crack under part flex stress. I will use it again and again.

    2 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register