- Home
- Blast Media Sifter Screen
- Product Reviews
Details
Sifter Screen keeps debris out of your blast media
Recycling abrasive media is a smart, money-saving idea, but you'll want to pour it through this sifter screen to remove any debris.
- Extends life of your media
- Keeps your blaster working clog-free
- Large 11"-diameter sifting area
- 16-mesh screen
Blast Media Glass Bead 50 lb
Only
$39.99
As low as:
$37.99
|
Hardware Basket for Abrasive Blasting
Only
$44.99
|
About Blast Media Sifter Screen
Sifter Screen works like a "filter" to remove large, unwanted debris out of recycled media. Using sifted media reduces the chance of clogged nozzles in your blast cabinets, siphon blaster, or pressure blaster.
WARNING: READ BEFORE PURCHASE OR USE OF THIS PRODUCT.
The use of silica sand or any silica-based product is NOT recommended in any abrasive blaster. Use of such materials could be seriously harmful to your health. Such materials have been known to cause cancer or other deadly diseases. Read carefully the MSDS (Material Safety Data Sheet) for any media used with this product. Always wear proper respiratory equipment when working with this product. Consult OSHA or other safety sources for the proper type of respiratory equipment.
Read operating instructions before using any abrasive blast equipment. Abrasive blast operator must wear appropriate personal protective equipment as approved by MSHA/NIOSH.
Particles are emitted from blaster gun under pressure. Protect eyes and uncovered areas of body at all times. Use adequate respiratory protection, or possible damage to lungs or respiratory system may occur.
The use of silica sand or any silica-based product is NOT recommended in any abrasive blaster. Use of such materials could be seriously harmful to your health. Such materials have been known to cause cancer or other deadly diseases. Read carefully the MSDS (Material Safety Data Sheet) for any media used with this product. Always wear proper respiratory equipment when working with this product. Consult OSHA or other safety sources for the proper type of respiratory equipment.
Read operating instructions before using any abrasive blast equipment. Abrasive blast operator must wear appropriate personal protective equipment as approved by MSHA/NIOSH.
Particles are emitted from blaster gun under pressure. Protect eyes and uncovered areas of body at all times. Use adequate respiratory protection, or possible damage to lungs or respiratory system may occur.
Customer Reviews
2 Item(s)
per page
-
Thumbs down, mesh is not fine enough
(Posted on 2/26/13)
Review by Joe_ace -
When I strain my media there are many particles that are not sifted out that could potentially clog the nozzle of your media blaster. Utimately, I went to Home Depot in the wall mounted AC section I purchased a foam flexible filter and then placed it over the sifter and it did a much better job of filtering out the paint flakes and other particle that come off while blasting. So really I am just using the sifter as a support for my AC foam filter.Price Value Quality -
Two man operation. screen meash too fine
(Posted on 12/11/11)
Review by John -
Nicely made but I don't think it was ever tested. Passes ultra fine sand nicely. Does not pass fine sand very well. Overall diameter is just too small to fit in a standard 5 gallon pail. Opening is almost as large as my sandblast funnel but it has no pilot to hold it in place. Therefore you need a second person to hold the funnel and sifter aligned. Or a second person to hold the sifter up from a pail when using it.Price Value Quality
2 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|