Bristle Disc 4 1/2 in, 50 grit Green

    Item #31128 Brand: 3M

    Price
    Value
    Quality
    14 Review(s)

    Details

    Scotch-Brite™ Bristle Disc from 3M™ eats through paint and rust fast Just attach this bristle disc to your angle grinder and easily remove paint, rust and scale.
    • Powers thru paint, rust, stains, adhesives, weld burn and other surface contaminants
    • No dangerous flying wire bristles
    • 50-grit
    • 12,000-rpm maximum

    About Bristle Disc 4 1/2 in, 50 grit Green

    Bristle disc rapidly removes paint, rust, and scale as you run it along your work surface. The flexibility of this 50-grit bristle disc is perfect for irregular surfaces, and also preps surfaces for welding, leading and painting. Fits most angle grinders with a 5/8" x 11 threaded shaft.


    Contents

    One 4-1/2"-diameter, 50-grit Bristle Disc


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 14 total

    per page
    1. 1
    2. 2
    works well on small area (Posted on 10/30/13)
    Review by frank
    Quality
    Price
    Value
    will only last on 2 feet x 2 feet area i am removing old dry glue on 1967 k-20 i had to go back to wire wheel .to pricey for 20-30 work.
    Too much$$$$ (Posted on 7/19/13)
    Review by Joel
    Price
    Value
    Quality
    Works great will clean it to a smooth surface but the $60 i paid for two was not worth the short time i had to use them. I would only buy it again if they where $10 each
    Great little gadget (Posted on 7/15/13)
    Review by Randy
    Quality
    Price
    Value
    I found that if you let the weight of your angle grinder provide the pressure the disc lasts alot longer. I was able to strip an entire roof, trunk lid and quarter panel with just one disc. I went through eight coats of paint and primer and it took some time, but I got the job done. I just wish they weren't so expensive, but I guess if you want a good product you should be prepared to pay.
    works grate (Posted on 5/14/13)
    Review by garrett
    Price
    Value
    Quality
    have used the smaller ones at work for years. got one of the bigger one to try on my chevelle im stripping down. works grate ordered more. if any one is in need for somthing fast and easy to remove rust or paint with out damaging the metel .
    Smooth Finish (Posted on 4/18/13)
    Review by EDDIE
    Value
    Quality
    Price
    The disc leaves a very smooth finish. It strips well on smooth surfaces. I used it on a firewall and it stripped it down in less than an hour. It removed all the surface rust and paint down to bare metal. For the price I wished it had lasted longer.
    better than expected (Posted on 2/14/13)
    Review by Todd
    Price
    Value
    Quality
    These little plastic gems are pretty impressive given how they fee on initial evaluation. I bought one as a trial as I'm stripping a Datsun Roadster to bare metal and repairing all the rust and rot... As skeptical as I was, I was equally impressed with the speed and quality of the strip job these little items performed. They ate rust, paint and body filler without slowing to digest. I liked them so much, I ordered another pair. Which brings me to the only (2) bad notes on these items. 1: the wear of these items. I know they wear to salvage the metal underneath. A sacrifice to salvage your project, but it does happen. When it does it can be spectacular. Little shards of plastic bristles flake off in various directions. and... 2: The cost to replace these items. $30 per brush?!? If these set you back $20 per, I'd be singing the praises to EVERYONE who would listen. They are awesome but that awesomeness comes with a price tag and $30 is it. That said, I will cont to use these as the performance they offer is... awesome.
    excellent (Posted on 2/13/13)
    Review by Stephen
    Price
    Value
    Quality
    Restoring a 70 big block Camaro, removing all interior and exterior paint and have used a wide variety of tools, wire cups, sand blasting,etc. this is by far the best, produces very little heat, in comparison, no wires flying off, lasts longer than HF brushes, overall, highly recommended, also using a couple of smaller ones I got from Amazon for my mini air grinder, also work well..
    Great product (Posted on 9/4/12)
    Review by speed
    Price
    Value
    Quality
    I used this on my 70 Camaro frame to strip what remained after using a chemical paint remover. This product works exactly as advertised. I admit that I wore the product out in several hours but considering the quality of the job this short life can be expected. I just ordered another one to strip the firewall. Money well spent for a job well done.
    speed
    Great but Pricey (Posted on 10/31/11)
    Review by Ashton
    Quality
    Price
    Value
    Got this Bristle Disc to strip 3 layers of paint on my 66 mustang. It worked a heck of a lot better than using a DA and sanding pad, that's for sure! Using this bristle disc I was able to sand off 3/4 of the roof in about 45 minutes! At 45 minutes, the bristle disc was completely dull and that's where I was disappointed! You pay 30 bucks for this product and it doesn't even last you an hour... Very pricey but its worth it to me so I will buy more to finish off the rest of the car...
    Great product (Posted on 7/24/11)
    Review by Mick
    Price
    Value
    Quality
    Removing all paint from '72 Camaro; primer, orig. paint, some epoxy where repaired, and re-paint. Quicker and safer than chemical, safer than wire bristle, better than sandpaper, leaves nice finish. Have used 3 already, and will continue with them. Nice product.

    Items 1 to 10 of 14 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register