Under Gone Undercoating Remover Aerosol 17 oz

    Item #31130 Z

    Quality
    Price
    Value
    15 Review(s)

    Details

    Undercoat removal gets no easier than this—just spray and scrape! Under Gone™ Undercoat Remover softens rubberized undercoatings and tar so they can be easily removed by scraping. A must for surfaces to be welded.
    • Removes undercoatings that can be imprinted with a fingernail
    • Non-toxic, non-corrosive, CFC-free, biodegradable
    • 17-oz. aerosol can

    About Under Gone Undercoating Remover Aerosol 17 oz

    Undercoat removal made easy! Here's the solution for undercoats that can be imprinted with a thumbnail. Biodegradable undercoat remover quickly loosens the bond of the undercoating to the base metal and allows you to easily scrape it loose. Use PRE Painting Prep to remove any remaining residue for a "paint ready" surface. Not for use on baked-on, epoxy or urethane undercoatings. For cleaning up an area to be welded, this is a must! 17 oz. net wt. aerosol.


    Contents

    One aerosol can contains 17 oz of Undercoating Remover.


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    FAQ’s

    Non-toxic, non-corrosive, CFC-free, Biodegradable


    Application

    Shake can thoroughly before, and periodically during, use. Spray-apply to a 12" square area and allow to penetrate for 30 seconds to 2 minutes. Then scrape loosened undercoating from surface. Reapply if necessary to remove heavy applications.

    NOTE: Will remove paint! Rinse painted surfaces immediately with water to avoid damage. Do not use for removal of baked-on, epoxy or urethane coatings.


    Customers also viewed:

    Customer Reviews

    Items 11 to 15 of 15 total

    per page
    1. 1
    2. 2
    Worth its cost. (Posted on 9/19/11)
    Review by Jacob
    Value
    Quality
    Price
    I don’t know what the others are talking about, I used this on my 60 year old Lincoln and after doing a spot by hand I found it was much easier with the undergone. I did find that power washing fist was a must. So to the guy who has 7 cans left, send them to me.
    sucks (Posted on 8/14/11)
    Review by John
    Price
    Value
    Quality
    I have been restoring Oldsmobiles for 20 years and it is very hard to get the undercoating off the cars So I thought I would give the product a try, Don't it does not work like the can says it should. It would not even take the residue off after I removed the bulk of it with a torch.
    Thanks
    John
    Not so much. (Posted on 6/11/11)
    Review by Wade
    Price
    Value
    Quality
    I spent around 8 hours on the bottom of my car and wasn't even a third of the way done. So I thought that I would give Under Gone a try. Well it didn't even touch the undercoating on the bottom of the car and now I have 7 cans that I can't even use. I would say save yourself some the money and get back to the grinder and wire wheel.
    Easy and effective (Posted on 4/3/11)
    Review by Hurst O !
    Quality
    Price
    Value
    Working under the car with a rotary wirebrush & scraper have been a hastle & a mess.
    Trying this product made the job much easier.
    Easy application , no fumes , safe to use.
    Nice product !
    awsome!!!! (Posted on 8/26/10)
    Review by amanda
    Value
    Quality
    Price
    this product works great. i have tried other ways to get the undercoating off and i must say this has worked the best and the fastest. i bought two cans and so far i barley gone through one. it feels like its a never ending can. when they say a little goes a long way. they were talking about this product.

    Items 11 to 15 of 15 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register