Glyptal Red Brush On 1 qt

    Item #46001ZP Brand: Glyptal

    Details

    Multi-Purpose Glyptal® Red Enamel seals uneven surfaces in engine castings to improve oil circulation Glyptal 1201 seals the rough interior castings of engine blocks to help prevent engine damage. Sealing the tiny pores left in metal after bead blasting leaves the engine block interior smooth and clean, and that helps keep oil clean and flowing freely.
    • Acid- and oil-resistant
    • Also resists moisture, heat dust, salt spray
    • Anti-corrosion protection

    About Glyptal Red Brush On 1 qt

    Recommended by many high performance engine rebuilding books, Glyptal seals the tiny pores left in metal after bead blasting and leaves the engine block interiors smooth. Helps keep the oil clean and flowing freely. Acid and oil resistant. Used on generator and alternator armatures, Glyptal has great electrical insulating properties, too!


    Contents

    Covers 24 Sq. Ft, Max Temp 250F, Enamel.


    Safety

    Always use in a well-ventilated area, and always wear eye, skin and respiratory protection.


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Application

    Glyptal is used to seal the internal surfaces of the engine block for fastest oil return to the sump. Make sure the surface is absolutely FREE OF GREASE OR OIL! Our Metal Wash concentrate (10120) or PRE Painting Prep (10041 Z) with the Engine Brush Kit (46035) does a great job of cleaning the engine block. Be careful to avoid getting paint on machined surfaces or in oil passage ways. Can be thinned with Xylol or Xylene.


    Customers also viewed:

    Customer Reviews

    8 Item(s)

    per page
    Greaqt for keeping inside of engine clean (Posted on 11/18/2013)
    Review by Rick
    Quality
    Price
    Value
    Have used many times in race engines greatest sealer you can purchase.
    Glyptal paint is a non conductor of electricity. Edison invented it. What I usually use it for is the inside of iron blocks that run on Nitro. The Nitro doesn't have an effect on it like other paints do (Posted on 9/18/2013)
    Review by Bob
    Price
    Value
    Quality
    I used this paint on a rotory table that goes on my mill. This will keep the oil from leeking from the inside out.
    magnificent (Posted on 12/29/2011)
    Review by dms
    Quality
    Price
    Value
    I have used this stuff for years on everything that has an oil product in it! from Race motors to rear end differentials,to Air compressor pumps and tanks.. you cannot beat this stuff if you want it sealed up for slick for oil returns,and cleaner oil too.
    good oroduct (Posted on 10/26/2011)
    Review by EJ
    Value
    Quality
    Price
    The product is easy to work with. It dries fast .
    Glyptal (Posted on 2/26/2011)
    Review by Teama
    Quality
    Price
    Value
    Glyptal has bee my choice for coating internal surfaces for years.

    It allows the rough interior casting surfaces to smooth out and allows lubrication to return to it's sump without "clogging" or building up as can be seen when re-building components.

    It applies easily and a quart goes a long way.

    IT IS PRICEY, if you can afford it I wolud reccommend it's useage.
    Excellent product & easy to use (Posted on 3/11/2010)
    Review by Tim
    Price
    Value
    Quality
    The product is a very good product. It is very easy to use & Eastwood is very helpful with information & tips to make your project come out perfect & without a hitch.
    Tim
    Expensive but unique (Posted on 2/13/2010)
    Review by Desoto61
    Price
    Value
    Quality
    I used this to coat the inside of a transfer case I was rebuilding for my truck to prevent seepage of the lubricants through the case.
    The stuff is very expensive but a quart goes a very long way. I used less than 1/4 to do the whole case, and I could find no other product that does what Glyptal does.
    Make sure you have good ventilation and the use of a cartridge-type respirator doesn't hurt. The fumes from this stuff are VERY strong.
    It begins to dry quickly and is difficult to clean up, so good prep and disposable brushes are a good idea. Also be careful where you apply it, it sets up very hard and is difficult to remove in areas where the thickness could cause fitment or clearance issues.
    I can't speak to it's performance as I have not put the part back into service but it came well recommended.
    Glyptal Experience (Posted on 1/26/2010)
    Review by GT Racer
    Quality
    Price
    Value
    If you have ever opened a motor and seen the inside of the block treated with Glyptal you would understand how great it is. The surfaces are smooth and clean

    This is a product, like primers, that you rarely see after they are used. However if you like fine detail and clean motor internals you cannot beat it.

    I use it to finish the internal components of my Maytag motor restorations as well, just simply great.

    8 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register