Details
Handy Stand holds your gravity-feed spray gun when you need to put it down or for filling
You can't just lay a full spray gun down on its side when you need to stop your work for a while, so use this convenient stand to hold your gravity-feed spray gun upright. Place your filter/strainer in the top ring for easy filling.
Do you have a product idea? Click Here to suggest it!
- Powder-coated steel construction
- May be mounted to wall or on benchtop
- Strainer and spray gun not included
Do you have a product idea? Click Here to suggest it!
Eastwood Branded Color Paint Chart
Only
$4.99
|
DeVilbiss StartingLine Auto Paint and Priming SystemOnly $169.99 Sale $129.99 |
Paint Strainer Set Fine Medium And Coarse
Only
$39.99
|
Paint Mixing Cup Set 13 pc
Only
$24.99
|
About Gravity-Feed Paint Gun Stand
The Eastwood Gravity Paint Gun Stand holds both the gun and filter for easy filling or storage. Durable powder-coated steel construction makes clean-up easy.
Customer Reviews
10 Item(s)
per page
-
Works for what I needed
(Posted on 3/23/13)
Review by Dan -
Solid built nice finish. The upper strainer holder has a sloppy fit with the lower stand. Easy fix. Would recommend to others.Value Quality Price -
good price
(Posted on 2/3/13)
Review by ty -
good quality and pricePrice Value Quality -
Very good stand
(Posted on 12/16/12)
Review by jbt353 -
For the price, this stand works well. Was put into use as soon as it was unwrapped. No regrets.Quality Price Value -
Gun holder
(Posted on 5/22/12)
Review by michael -
I made a base to screw it to and added a spacer to hold the handle out so the cup would aligned with the strainer holder.I put wire heat shrink over the cup support bars.Rubber tubing would also work. I have seen the paint cup get all scraped up on the bottom . You need to grind the burrs off the ends of the steel rods in the gap where you set the cup into the support They are sharp and will damage the cup. I had to have a nice holder for my new Iwata!Price Value Quality
-
Improvments
(Posted on 5/22/12)
Review by mllud -
I made a base to screw it to and added a spacer to hold the handle out so the cup would aligned with the strainer holder.I put wire heat shrink over the cup support bars.Rubber tubing would also work. I have seen the paint cup get all scraped up on the bottom . You need to grind the burrs off the ends of the steel rods in the gap where you set the cup into the support They are sharp and will damage the cup. I had to have a nice holder for my new Iwata!Price Value Quality
-
Don't Bother
(Posted on 8/11/11)
Review by Allen -
Only thing I've ever bought from Eastwood that was not worth the effort. Poorly made; porous 'weld' broke in days. Make your own and be happier.Price Value Quality -
Quality
(Posted on 2/13/11)
Review by Longranger -
Good Quality... Super low Price... 3 Guns, 3 holders...Price Value Quality -
Does the job for me
(Posted on 11/25/10)
Review by Matt -
My paint work is occasional, and the largest gun I use is a new-ish DeVilbiss gravity feed with an add-on regulator at the grip. I drive a #6 hex head sheet metal screw thru the provided hole on the stand's base to affix it to my temporary table and it's ready to go. A C-clamp would also work. When I'm done, it breaks down just as fast. By placing the stand at the edge of the table, I can set the gun on the stand with the air hose still attached. The Paint Gun Stand is a good product.Price Value Quality -
Not what I had hoped for
(Posted on 7/24/10)
Review by The Brad Hatter -
This stand comes in two pieces and the upper piece has a female (hollow) bottom that simply slides over the vertical rod of the lower peice. It is not a tight fit and the upper peice is loose and swings from side to side. This is easy enough to fix with a tack weld or a hammer, but unfortuneatly the geometery doesn't macth well with my very popular style of DeVILBISS paint gun.Value Quality Price
Nothing a good hobbyist can't modify pretty quickly but honestly there isn't enough material supplied to lengthen it the way it should be.
To add to my dismay the shipment came a few days after I needed it for a project. It shipped with another item but I had no idea that either item wouldn't ship right away when I ordered them. It was my understanding that they were both in stock. -
Outstanding product and value
(Posted on 3/18/10)
Review by Robert -
Lightweight, yet, sturdy, this product is practical and easy to assemble. It also allows easy attachment to any portable cart or permanent bench. Great value that make my work much easierPrice Value Quality
10 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|