Rust Encapsulator Red aerosol

    Item #16040Z

    Price
    Value
    Quality
    3 Review(s)

    Details

    Stop rust in its tracks! Our "Red" Rust Encapsulator has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait ’til you try this Red Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
    • Twice the corrosion resistance of our original formula for greater durability
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster
    • 15-oz. aerosol covers about 10 sq. ft.
    • As seen on "My Classic Car" TV show

    About Rust Encapsulator Red aerosol

    Eastwood Rust Encapsulator has been tested by an independent lab to be one of the most effective rust-preventive products yet (tested to 500 hours in a salt-spray chamber). Red Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats (including Eastwood Chassis Black). For the absolute ultimate rust remedy, first brush or spray-on Eastwood Rust Converter, then prime with Rust Encapsulator. One 15-oz. aerosol covers about 10 sq. ft., and contains no isocyanates. Heat-resistant up to 400 degreesF. Made in the USA.

    Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

    Buy 3 or more and SAVE over individual pricing!


    Application

    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


    Accessories

    In places where little or no surface prep can be done, our 16017ZP Heavy-Duty Anti-Rust (Qt.) is actually a better choice for applying into blind areas such as box sections. Buy 3 or more quart cans and save!


    FAQs

    (Q) Can Red Rust Encapsulator be applied with the Undercoating System?
    (A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the 16017ZP Heavy-Duty Anti-Rust (Qt.). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


    Safety

    Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake vigorously for 2 minutes before spraying.


    MSDS

    Click Here for Material Safety Data Sheet


    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    Good formula (Posted on 3/21/12)
    Review by dick
    Price
    Value
    Quality
    would accept adhesive when recarpeting old car.
    Good Product (Posted on 10/31/11)
    Review by Zekeman
    Quality
    Price
    Value
    The rust encapsulator performs as advertised. For my vehicle,'50 Studebaker, I used the product in hard to reach areas. On older projects, 3+ years, it still holds up ewll and shows no signs of failing. For me, it's the best available.
    Chassis Preventive Maintenance (Posted on 8/14/10)
    Review by TriumphGuy
    Value
    Quality
    Price
    Every few years I reassessed the condition of the frame on my TR6. When I first began doing this I noticed a familiar Red coating on my floorboards in particular. I contacted the body shop where I had my off-chassis restoration performed back in 1987. I inquired as to what type of Primer products that they used on the car. They stated "Eastwood Rust Encapsulator". I have continued the practice of using Rust Encapsulator as I find it the best choice in preventing and slowing down rust formation.

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register