Shoot Suit Welded Stud Puller

    Item #31014 Brand: Eastwood

    Quality
    Price
    Value
    8 Review(s)

    Details

    Shoot Suit® Stud Puller pulls-out minor dings and dents with exacting control After welding a stud onto that ding or minor dent with our stud weld gun, use the Shoot Suit® Stud Puller to pull the stud (and dent) to just the right level.
    • Use with 2.0 to 2.6mm draw pins (studs)
    • Works with any of our stud welder guns

    About Shoot Suit Welded Stud Puller

    Use the Shoot Suit® Stud Puller with any of our Stud Welder Systems to repair minor dings and dents due to hail, shopping carts in parking lots, etc. Just weld a draw-pin (stud) to the dinged surface, attach this tool to the pin, slowly squeeze the handles and watch as the dent is easily drawn out until it's flush with the surface. Then snip-off the draw pin. About 11-3/4" long.


    Accessories

    31123A Stud Pins, 2.5mm; 500-pack
    31041C Stud Pins, 2.0mm; 500-pack
    Stud Welder Systems


    Customers also viewed:

    Customer Reviews

    8 Item(s)

    per page
    awesome tool............. (Posted on 2/9/14)
    Review by harold
    Quality
    Price
    Value
    This tool works great. Remember it is designed for smaller dimple type dents, Not big dents that are deep. For those you need the slide hammer. You will be slightly limited on your depth of dent. They need to make a couple bigger and smaller diameter bases to make it even better. As much as I like it, I do feel that being it is a screw in Access. for the standard pop rivet gun that the price is just alittle bit high, but it is worth the price still for the time it saves and added cost of bondo material saved. Now they need to have replacement part available. I am going to try to make my own sizes now. My only complaint is poor customer service and slow shipping even when paying for fast delivery.
    Works great! (Posted on 2/3/14)
    Review by John
    Price
    Value
    Quality
    I used it on several dents on a Tahoe door and found it pulled nicely. Easy control of depth pull. I did however manage to break the plastic outer ring probably because I twisted it. I can still use it though. If the ring was steel it probably wouldn't break but would increase the cost.
    I Love Eastwood products, but NOT this one... (Posted on 5/5/13)
    Review by W Scott
    Price
    Value
    Quality
    I had a depressed dent from a door that creased the front fender. With the stand off surround attachment installed and due to the depressed dent, the studs were lower / shorter in the puller portion - so the Stud Puller NEVER cinched around the posts. I didn't get even one pull.
    the BOMB (Posted on 5/4/13)
    Review by Turbowolf
    Price
    Value
    Quality
    I had a nasty dent in my 72 Chargers bulge hood that was on top of the structure so i couldnt dollie it out. I used my stud welder and this puller and the dent was GONE in seconds. If you have a stud gun you need one of these.
    If you have a stud welder you HAVE to have this (Posted on 12/26/11)
    Review by Ron in Indiana
    Quality
    Price
    Value
    As the others said this is a great addition to your stud welder. It is so much easier and works better than a slide hammer. I have a T Handle puller also but this tool works even better. I use 2,2 pins with no problem of slippage. This can also be used for pop rivits in 3 sizes by changing the tips.
    well worth it tool (Posted on 12/4/11)
    Review by jeepguy
    Price
    Value
    Quality
    i bought and it is so much better pulling with it than the slide hammer is ! yes, buy it if you buy t he stud welder gun and use 2.5 rivets.
    Great tool (Posted on 8/15/11)
    Review by Wayne
    Price
    Value
    Quality
    It won't pull 2.0 pins. Had to buy 2.5 pins
    Fantastic Tool (Posted on 1/21/10)
    Review by "EZ"
    Price
    Value
    Quality
    If you're going to buy the stud welder you've GOT TO get this tool as well. This is so much better than trying to use a slide hammer to pull dents. There's a lot more finesse with this tool. The only problem I had was I bought 2.0mm studs when I ran out and this tool slips a lot with those. You need to use the 2.5mm studs.

    "EZ"
    EZ's Customs
    Ringgold, GA.

    8 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register