Complete Steering Wheel Restoration Kit
- PC-7 Epoxy
- Adhesion Promoter
- PRE Painting Prep
- Instructions and Restoration Book
About Complete Steering Wheel Restoration Kit
Repair Plastic and Hard Rubber Steering Wheels - Use this kit to repair cracks in most steering wheels. Includes 1/2 lb of PC-7 Epoxy (52195) to fill cracks, an aerosol can of PRE Painting Prep (10041Z) to clean the surface, an aerosol can of Adhesion Promotor (52366Z) to fill minor imperfections and provide adhesion for the top coat and instructions.
Steering Wheel Restoration Kit includes 1/2 lb of PC-7 Epoxy (52195), aerosol can of PRE Painting Prep (10041Z), aerosol can of Adhesion Promoter (52366Z) and instructions.
Use an additional can of (52195) 1/2 lb. PC-7 or (52047) 1 lb. PC-7 as necessary to repair larger areas. If the steering rim needs extensive repairs you may want to consider a rim transplant. See the Steering Wheel Repair Book (52017) for this and other techniques.
Made in the USA.
Review manual for steering wheel removal. Wash wheel with dishwashing detergent and rinse. Once dry wipe wheel down with PRE Painting Prep. Usa a triangular file to "V" out crack down to metal frame. Mix equal parts of "A" and "B" epoxy PC-7 sufficiant to fill defect/s. Press PC-7 into cracks and smooth with a finger dipped in water. Allow repair to fully harden overnight. Sand repair areas by hand with 220 proceeding to 320 grit abrasive paper. Wipe wheel with PRE Painting Prep and handle with clean disposable gloves. Apply Adhesion Promoter per label directions to fill minor imperfections and topcoat.
Customers also viewed:
2-part epoxy fills cracks in steering wheels, external gas tanksOnly $11.99