Eastwood Contour Polyester Primer Surfacer Gal

    Eastwood Contour Polyester Primer Surfacer Gal

    Product Review (submitted on October 11, 2012):

    The concept of "spray on bondo" was a new one to me but this stuff works well.
    Some tips:
    1) Stir it up using a BIG stick. This product settles out, and it is stiff. Shaking won't break it loose. I broke two regular wood paint stirring sticks in the process. Good arm exercise.
    2)Strain it with a fine strainer, there are lumps even after a lot of stirring. My first attempt without straining properly resulted in a lot of gun plugging and sputtering.
    3)Sprays well with the Eastwood Concours gun with a 1.8 tip and 40 psi at the gun inlet. Don't worry about trying to get it on too smoothly, because this stuff sands very easily.
    4) I put on a guide coat and block sanded with 320 dry and then did 400. Because this polyester is fairly porous, my paint supplier suggested a sealer coat prior to the top coat.