- Eastwood Rubberized Undercoating Aerosol With 24-in. Nozzle
Eastwood Rubberized Undercoating Aerosol With 24-in. Nozzle
About Eastwood Rubberized Undercoating Aerosol With 24-in. Nozzle
Eastwood's Rubberized Undercoating stands up to the most extreme conditions to protect your vehicle's underside from rust, road salt and corrosion. This resilient black coating protects the surface against chips, and deadens sound. Use the handy 2 foot extenion nozzle to get into hard to reach places where a normal aerosol cannot reach, saving you time and prevent corrosion where you need it! Use PRE Painting Prep 10041 Z to clean and purge the extension nozzle after each use.
18 ounces net weight
10041z PRE Painting Prep
Always use in a well ventilated area away from open flame. Always wear eye, skin & respiratory protection. Consult MSDS for specific safety warnings.
Clean surface and remove loose scale, debris and rust. Apply in heavy coats until desired thickess is acheived. tack dry in 20 minutes, full cure in 24 hours. One can covers about 7 sq ft and withstands up to 200 degrees F. The cured coating can also be painted. Use a heat gun and dull putty knife to remove undercoat. Immediately after use purge Eastwood's PRE Painting Prep to clean out extension hose
Customers also viewed:
Easy removal of undercoating and tar -- just spray and scrape!
Starting at: $12.99
Transforms surface rust into a paintable surface!
Starting at: $15.79
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $9.99