- Rust Encapsulator Black Qt.
Rust Encapsulator Black Qt.
- Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
- Epoxy-fortified for better adhesion and topcoat compatibility
- Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
- Cures faster, and the low-VOC formula is acceptable in California
- 1-quart can covers about 50 sq. ft.
- As seen on "My Classic Car" TV show
About Rust Encapsulator Black Qt.
Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One quart covers about 50 sq. ft. with a double coat. Can be thinned up to 20% with lacquer thinner for spraying. Contains no isocyanates. Heat resistant up to 400Â³ F. Made in the USA. Buy 3 or more and save.
One quart of Rust Encapsulator, enough to coat up to 50 feet with a double coat.
Heavy-duty Anti Rust Qt. (16017 Z P) is actually superior for applying into blind areas such as box sections where little or no surface prep can be done. Buy 3 or more and SAVE!
Rust Encapsulator can be applied with the Undercoating System, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy Duty Anti-Rust (16017 ZP). This waxy, oily product flows into pinch welds & through rust to seal surface from contact with moisture & air, but cannot be painted over so is only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.
Work in a well ventilated area when applying this product. The use of a respirator like our Professional Respirator (34029) is recommended when applying this coating.
Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposites. Thoroughly stir can contents to assure complete mixing. Feather surrounding paint with 220 grit sandpaper. Brush apply directly from the can or thin 20% w/lacquer thinner to spray. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat. See can label for more details.
Accessories & Consumables
Heavy-Duty Anti-Rust (16017ZP)
Eastwoods Evolution HVLP Paint Gun Item (12776)
Eastwoods Concours Spray Gun Item (51550)
Eastwoods PRE Painting Prep, 30 ounce (10194ZP)
Eastwoods Rust Converter