- Rust Encapsulator Black 15 oz.aerosol
Rust Encapsulator Black 15 oz.aerosol
- Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
- Epoxy-fortified for better adhesion and topcoat compatibility
- Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
- Cures faster, and the low-VOC formula is acceptable in California
- 15-oz. aerosol covers about 10 sq. ft.
- As seen on "My Classic Car" TV show
About Rust Encapsulator Black 15 oz.aerosol
Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective protection from rust yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One 15 oz. net wt. aerosol covers about 10 sq. ft. Contains no isocyanates. Heat resistant up to 400Â³ F. Made in the USA. Buy 3 or more and SAVE over individual pricing.
One 15 ounce net wt. aerosol, enough to cover up to 10 square feet.
Heavy-duty Anti Rust Qt. (16017 Z P) is actually superior for applying into blind areas such as box sections where little or no surface prep can be done. Buy 3 or more and SAVE!
Rust Encapsulator can be applied with the Undercoating System, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy Duty Anti-Rust (16017 ZP). This waxy, oily product flows into pinch welds & through rust to seal surface from contact with moisture & air, but cannot be painted over so is only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.
Work in a well ventilated area when applying this product. The use of a respirator like our Professional Respirator (34029) is recommended when applying this coating. Shake vigorously for 2 mins before spraying !!
Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposites. Shake can for at least 2 mins after mixing ball starts to rattle. Feather surrounding paint with 220 grit sandpaper. Apply Rust Encapsulator can 10-12" from surface. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat. See can label for more details.
Accessories & Consumables
In places where little or no surface prep can be done, our Heavy-Duty Anti-Rust (16017ZP) is actually a better choice for applying into blind areas such as box sections. Buy 3 or more quart cans and save!
Customers also viewed:
Leaves de-rusted metal ready to paint or powder-coat; liquid or gel
Starting at: $19.99
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $6.99
The perfect lacquer paint to match the OEM finish under the hood