- Rust Encapsulator Black-Gallon
Rust Encapsulator Black-Gallon
- Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
- Epoxy-fortified for better adhesion and topcoat compatibility
- Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
- Cures faster, and the low-VOC formula is acceptable in California
- 1-gallon can covers about 200 sq. ft.
- As seen on "My Classic Car" TV show
About Rust Encapsulator Black-Gallon
Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One gallon covers about 200 sq. ft. with a double coat. Contains no isocyanates. Heat resistant up to 400Â³ F. Made in the USA.
Black Rust Encapsulator, 1-agllon
(Q) Can Rust Encapsulator be applied with the Undercoating System?
(A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the 16017ZP Heavy-Duty Anti-Rust (Qt.). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.
Safety / MSDS
Work in a well-ventilated area when applying this product. The use of a respirator is recommended.
60-day mfr's. warranty against defects.
Designed, engineered and tested to Eastwood's specifications.
Made in the USA.
Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Brush-apply directly from the can, or thin 20% with lacquer thinner to spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.
Accessories and Consumables
In places where little or no surface prep can be done, our 16017ZP Heavy-Duty Anti-Rust (Qt.) is actually a better choice for applying into blind areas such as box sections. Buy 3 or more quart cans and save!
Eastwood Rust Converter
Eastwood Extreme Chassis Black
Eastwood Rust Converter Aerosol
Customers also viewed:
Easy removal of undercoating and tar -- just spray and scrape!
Starting at: $12.99
Transforms surface rust into a paintable surface!
Starting at: $19.99