Item #
14761Z
BRAND: Eastwood
Rust Encapsulator Black 2 Ounce Aerosol
Try it and see how well it stops rust from spreading
Try it and see how well it stops rust from spreading
Try it and see how well it stops rust from spreading
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Product Overview:
Description
Try it first! Rust Encapsulator Trial Size lets you see how easy it is to paint over old rust.
Kit includes 2 ozs. of Rust Encapsulator, enough to clean and coat 4 sq. ft. Apply this high-performance rust-preventive coating directly on rusty metal. Unlike other paint-over-rust products, Rust Encapsulator needs no top coat and is UV-resistant.
Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Epoxy-fortified for better adhesion and topcoat compatibility. Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas.
Kit includes 2 ozs. of Rust Encapsulator, enough to clean and coat 4 sq. ft. Apply this high-performance rust-preventive coating directly on rusty metal. Unlike other paint-over-rust products, Rust Encapsulator needs no top coat and is UV-resistant.
Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Epoxy-fortified for better adhesion and topcoat compatibility. Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas.
- No topcoat needed
- UV-resistant
- Matte black finish
- Resists to 400 degrees F
Warranty
In the Box
Contents
Guides & Accessories
Safety Information
Accessories
Application Tips
Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220 grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10 12 inch above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3 to 4 hours at 68 degrees F. For greater durability, a second coat can be applied 1 hour after the first. Allow 6 to 8 hours after the last coat before applying topcoat. Use over or under body fillers.
Reviews
Questions & Answers
We found other products you might like!
Rust Encapsulator Black 2 Ounce Aerosol
$4.99
Out of stock