• Home
  • Rust Encapsulator White 15 ounce Aerosol

Rust Encapsulator White 15 ounce Aerosol

Item #14824Z Brand: Eastwood

Reformulated with TWICE the corrosion resistance!

Details

Stop rust in its tracks! Our Rust Encapsulator (White) has been reformulated with TWICE the corrosion resistance!

You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.

  • White
  • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
  • Epoxy-fortified for better adhesion and topcoat compatibility
  • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
  • Cures faster, and the low-VOC formula is acceptable in California
  • 15-oz. aerosol covers about 10 sq. ft.
  • As seen on "My Classic Car" TV show

About Rust Encapsulator White 15 ounce Aerosol

Unlike off the shelf under coatings, Rubberized Rust Encapsulator can be applied directly over rust and without the bubbling that creates air pockets thus trapping rust. Since its engineered with high tech flex agents, its pliable finish protects surfaces from abrasions, road hazards and deadens sound. So durable it exceeded 1,000 hours of salt spray chamber testing, this surpasses the standards for a 2 component catalyzed coating! Simply apply directly over rust or bare metal; no need to topcoat. Remains flexible and durable. Satin black finish.


Contents

Net Weight 15 ounces


Accessories

10041Z PRE Painting Prep, 13651Z Rubberized Rust Encapsulator, 12515Z internal Frame Coating, 12096 Gel Rust Dissolver, 51483Z Rust Converter,


FAQs

(Q) Can Rust Encapsulator be applied with the Undercoating System?
(A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy-Duty Anti-Rust (16017ZP). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


Safety

always wear eye, skin and respirtaory protection. Apply in a well ventilated area away from open flame.


Warranty

Made in USA


Application

Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposits. Shake can for at least 2 mins after mixing ball starts to rattle.Feather surrounding paint with 220 grit sandpaper. Apply Rust Encapsulatorcan 10 to 12 inches from surface. Single coats dry to the touch in 20 minutes and arethoroughly dry in 3 to 4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6 to 8 hours after last coat before applying top coat.


Customers also viewed: