- Satin Black Hi-Temp Coating
Satin Black Hi-Temp Coating
Item #10393 Satin Black Hi-Temp Coating
- Temperature resistant up to 1400 degrees
- Available in pints or aerosol
- Brush or spray-on application
About Satin Black Hi-Temp Coating
Now the same great 1400 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.
One pint covers approximately 6 sq ft
Aerosol covers approximately 8-10 sq ft
Detailing Kit Information
Satin Black Exhaust Detailing Kit - 1 each of Satin Black High Temp Coating Exhaust Paint aerosol (10020Z) and a Pack of 3 disposable foam brushes (34152).
Contains Toluene 108-88-33 1, 1, 1, 2-Tectraflourethene (HFC-134A) 811-97-2, Stoddard Solvent 8052-41-3,Aluminum Flake 7429-90-5,Mineral Spirits 64742-88-7, Phenylpropyl Silsesquioxanes 68037-90-1,Toluene 108-88-3,Carbon Black1333-86-4. Keep away from heat, sparks & open flame. Use with adequate venting. Vapor is harmful. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call a physician immediately.Avoid prolonged skin contact & breathing of vapor mist.Warning: This product contains a chemical known to the State of California to cause birth defects and other reproductive harm.
Customers also viewed:
Snap onto a standard aerosol can for ergonomic, effortless, control
Spray coating inside chassis so it doesn't rust thru
Removes silicone, wax, polish, grease; promotes paint/powder adhesion