• Home
  • SEM Carbo Fill PLUS 27oz 40542

Could this be used to fill in a rusted rocker panel?

Asked by: Melb
This product is waterproof and capable of somewhat structural repairs, so technically it could be used (I personally would not fix the rust in this manner and note that this will be more of a temporary fix). The best approach would be to cut out the rust, treat the inside surfaces with Internal Frame Coat and weld in a new patch. This would give a lasting repair. If you do not have a welder, we also offer a No Weld Repair Kit that allows you to repair the rust in a better manner than filling in. http://www.eastwood.com/ew-no-weld-panel-repair-kit.html
Answered by: NickC
Date published: 2014-10-31
  • 2015-05-06T09:29CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_15191Z, PRD, sort_recentAnswersFirst
  • clientName_eastwood

SEM Carbo Fill PLUS 27oz 40542

Item #15191Z Brand: SEM

SEM Carbo Fill PLUS 27oz 40542

Details

Carbo Fill+ is a water and rust proof carbon fiber enriched filler that offers exceptional cosmetic and structural repairs for metal, SMC, FRP, HPA and PPO/PA without the risk of swelling the substrate. Includes hardener

More info...

About SEM Carbo Fill PLUS 27oz 40542

Carbo Fill+ is a water and rust proof carbon fiber enriched filler that offers exceptional cosmetic and structural repairs for metal, SMC, FRP, HPA and PPO/PA without the risk of swelling the substrate. Includes hardener


Contents

27 ounces, includes hardener


Accessories

31160 Sanding Block Kit, 13520ZP Contour Premium Body Filler, 13919 Body filler Spreaders, 31273 Body Filler Quick Mix Board, 14149Z 2K Aerospray Epoxy Primer


Safety

Always wear eye skin and respiratory protetcion when painting. Use in a well vetilated area away from open flame. Consult MSDS and TDS for proper safety precautions.


Application

Stir can or knead tube thoroughly before each use. Mix a 1 inch ribbon of cream hardener with a golf ball size of Carbofill. Apply a sufficient amount of carbofill to fill the repair area. Spreadmixture with a putty knife or spreader. Press firmly into area to eliminate airpockets. Apply higher than surrounding surface to allow for sanding. set 10 to 15 minutes, sand with 80 grit paper then finish with 180grit prime. For slight imperfections, reapply a skin coat.


Customers also viewed: