Chassis Black Satin Aerosol 14 oz - Chassis Black Aerosol

Cart is Empty

View

Related Products

Check items to add to the cart or select all

MIG175amp-220v Welders with FREE SPOOL GUN ONLY $499.99!

Eastwood Digital Torque Wrenches and Adaptors

Eastwood Pneumatic Tools - Impact Wrench, Metal Sheers, Metal Saw

Recently Viewed Items

Dual Voltage Powder Gun Starter Kit

Item #11698
Evercoat Everglass Filler Gallon

Item #51027 ZP
Rust Encapsulator - Paint Over Rust

Item #ENCAPSULATOR

Community Poll

ABOUT SSL CERTIFICATES

Home /
Specialty Coatings /
Chassis/Frame Paints /
Eastwood Chassis Black Paint Satin Aerosol 14 oz

Chassis Black Satin Aerosol 14 oz

Enlarge product image

Eastwood Chassis Black Paint Satin Aerosol 14 oz

Item #10025 Z

In Stock - Ready to Ship Today

Only $14.99

Buy 3 or more for $14.49 each and save 4%

Chassis Black Satin is the perfect coating at the perfect price for any undercar component

Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Tough, long-lasting formulation resists chips, corrosion and temperatures up to 300 degrees F, so it's perfect for the value-conscious enthusiast who wants a factory-fresh look while staying within a budget.

Resists corrosion, chips and scratches
Resists brake fluid, fuel and solvents
UV-resistant
Matches OEM finish
Apply multiple coats without lifting

7 Review(s) | Add Your Review

Add Items to Cart Qty:

Covers fast, with up to four times the coverage of similar size aerosols; cover an entire chassis with just 3-5 cans! (Also available in quarts to cover up to 40 sq. ft.; see 10043ZP Chassis Black® Paint Satin (Qt.).) Applies smoothly over bare metal, Eastwood Rust Encapsulator, or Eastwood Chassis Black Primer. (Not for use over self-etching primers.) 30-day Eastwood warranty.

Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

14-oz. can with high-solids content provides about 8 sq. ft. of coverage.

Click Here for Material Safety Data Sheet

Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings.

Eastwood’s Original Chassis Black is formulated to provide you with the right sheen, durability and long lasting great looks. Its 85% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more. Fortified with high solids and epoxy, Chassis Black resists chips, UV rays and high temperatures up to 300°F. One aerosol can covers approximately 8 square feet.

*Perfect for a factory or custom finish
*Fortified with epoxy for durability
*Resists temperatures up to 300°F
*One can cover approximately 8 Sq. Ft

Directions

READ ALL INSTRUCTIONS BEFORE USING
1. Ensure surface is clean and free of debris, greases and oils. Use Eastwood’s Chassis Kleen™ and/or PRE™ to remove stubborn grime and prepare the surface for painting.
2. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. For the best adhesion apply Eastwood’s Extreme Chassis Black Primer prior to painting. DO NOT USE OVER SELF-ETCHING PRIMERS. Test compatibility on a non-descript area before painting.
3. SHAKE CAN VIGOROUSLY FOR AT LEAST ONE MINUTE. Apply to surface with steady strokes about 8-10 inches from surface. It’s better to apply several light coats than one heavy coat. Ideal conditions are 70°F to 90F° at 50% (or less) humidity. Conditions will affect dry times.
4. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If re-coating after 36 hours, scuff surface with 320 grit abrasive.

Customer Reviews

(Posted on 1/15/12) Great Paint, Great Coverage
Review by Rays 52 Ford

Quality
Price
Value

I bought 5 cans to do the frame & axles on my 52 Ford F-1. It is a full bodied paint that covers well. Didn't have 1 run on the entire frame. Looks great! I'd use it again in a minute. Bought it during your free shipping promo, which made it an even better deal. Thanks.

(Posted on 12/17/11) Great product if the nozzle works
Review by clinton

Quality
Price
Value

Purchased several cans over the Years. I had one can that would not spray unless you pushed down and twisted the nozzle at the same time ! Eastwood said they couldnt see when I ever purchased the product ! So save your recipts dont learn the hard way like I did, as they did nothing to resolve it ! This can was a Waste of Money.

(Posted on 12/15/11) Great to use
Review by TODD

Quality
Price
Value

I've read reviews about nozzle problems and Eastwood now has the adjustable fan nozzles. All nozzles do sometimes plug up and that's why you save all your old nozzles and use as needed. This paint requires serious neglect to make it run. Super coverage and great finish. Remember if you live up north and keep paint in cold garage to bring it in were it can warm up, 24 hrs. best. a warm surface is better than cold, because it dries faster.

(Posted on 3/15/11) Good finish, when it works
Review by BSwan

Quality
Price
Value

Of the five cans I have received from Eastwood, three have clogged and stopped working. The clogging happens mid spray and ruined the finish on my freshly prepped part, to which I had to restrip the part. The two cans that did work put down and excellent finish.

(Posted on 5/22/10) Awsome product
Review by Bradford

Value
Quality
Price

I used this product to cover my front subframe and other parts. I have kept it outside through rain and shine and it looks as good as the day i painted it.