- Speed Blast Gravity Feed Blaster
Speed Blast Gravity Feed Blaster
Item #22035 Brand: Eastwood
jobs...just attach a home compressor
Speed Blaster will easily handle "spot" rust-removal jobs...just attach your home compressor!
- Operating Pressure 60 -100 PSI
- Working Pressure 70 -100 PSI
- Air Consumption 10 CFM - 100 PSI
- Min. Air Compressor 3 HP
- Fitting Size 1/4 NPT
- Container Capacity 26 Oz. (Vol.)
- Gun Material ABS
- Empty Weight 14 Oz.
- Max. Particle Size 14 Grit
- 2 Year Limited Warranty
- Eye protection must be worn
The Speed Blaster is perfect for small, quick, "spot" rust removal tasks when the rusted part is too big to fit in a blast cabinet.
About Speed Blast Gravity Feed Blaster
Simple to use: get into the appropriate safety gear, pour media into the hopper, connect an air line, and go! Use 60-80-grit media for best results. Comes with a ceramic blasting nozzle. Media flow valve is fully adjustable to give you precise control. 1-piece ABS gun weighs just 14 ozs. empty. 1/4" NPT fitting.
Speed Blaster with instructions
Blasting emits abrasive under pressure, so adequate respiratory, eye and body protection MUST be worn during use.
Customers also viewed:
Try abrasive or soda blasting on smaller jobs, without a big investment
Starting at: $14.99
Perfect if you're a beginning blaster, or you just don't blast that often
Removes debris from blast media when you want to reuse itOnly $15.79
Just let go and it stops the flow from your pressure blasterOnly $83.99
Protect your eyes, face from "rebounding" abrasive; adj. internal helmetOnly $39.99