• Home
  • Spot Weld Pliers
Spot Weld Pliers is rated 4.1 out of 5 by 63.
Rated 2 out of 5 by from Would not recommend So I took my nozzle off and the Spot Weld Nozzle went on smooth. Problem was that it kept going. Since it never got snug, I decided to take it off. The nozzle came off, but the core with the threads stayed on my welder. Not sure what to do with it since I can't weld the core in place and nothing comes to mind of some sort of an epoxy that can handle the temperature the nozzle reaches. If you are able to weld, you shouldn't waste your money. I just thought it would be convenient and may even put down a slightly cleaner weld for a less grinding on bigger jobs where I have a couple dozen or so welds.
Date published: 2012-06-29
Rated 5 out of 5 by from good I put this to the test, it works very good under perfect condition, clean medal, good ground, Lincoln 180 220v, the medal has to have a tight fit, meaning clamped together, it is not forgiving will not weld the slightest gap they recommend a set of pliers for spot welding, but in the real world we are not always welding an inch wide strip of medal and for us body guys never, however I did punch holes in a piece and use it as a plug weld and it did very well,, would I recommend this product, YES, it does what it says it will do, we’ll see more when I’m tryin to spot weld my floor broads in, I’m giving this a B+ so far
Date published: 2016-01-07
Rated 5 out of 5 by from This works very well This kit allows you to run a very consistent set of plug welds. I would essentially set the welder up for your metal, then line up the tip, and pull the trigger for about a the count of three. Nice clean welds with good penetration.
Date published: 2013-08-24
  • y_2017, m_9, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_63
  • loc_en_US, sid_13899, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Hi I have the older Lincoln weldpak 100 mig welder, will this work for me, I do not know how to tell if it is a tweco style torch head? Thank you for your time

Asked by: ronjw114
You will need a tweco 21 series nozzle for this to fit on your torch.
Answered by: SWhitehurst
Date published: 2017-08-20

Is tweco style 21 screw on, or slip on?

Asked by: Billsranger000
This is a Tweco Style 21 screw on.
Answered by: S Church
Date published: 2017-08-14

Will this work with flux core wire as well?

Asked by: Guardm
It works great, but experiment with duration of burn! Too bad I figured this out after I purchased a MIG to deal with the heat issue, though the MIG allows a variable range of power choice.
Answered by: mrrick
Date published: 2017-08-06

When using the spot weld nozzle with the eastwood 135 mig, welding 16ga. , what power, gas, and wire speed settings would be best?

Asked by: Smokeatr23
It would be best to start with the settings for the machine and then tweak to how you weld.
Answered by: S Church
Date published: 2017-08-14

I have a Hobart 140 - will the spot weld tip fit? It indicates it fits all machines with a Tweco style torch

Asked by: Dart Man 61
This fits torches that use the Tweco 21 series nozzles.
Answered by: S Church
Date published: 2017-08-14

Does this nozzle fit the tweco fusion 180 might gun. Hot max nozzle does not fit.

Asked by: Ga49945
We have never tested with that exact torch. We do know it fits most thread on Tweco style torches.
Answered by: S Church
Date published: 2017-08-03

What Eastwood 220v model number  would you recommend me getting to work with this kit.

Asked by: Joe88
This will be a perfect fit with the MIG 175.
Answered by: S Church
Date published: 2017-08-17

Can this be used to make welds when doing stitch welds on a patch panel

Asked by: Ultpainter
This tool will be the best way to make a stitch weld since you cannot see exactly where the weld is at.
Answered by: S Church
Date published: 2016-11-26
  • y_2017, m_9, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_13899, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Spot Weld Pliers

Item #13899 Brand: Eastwood

Holds 2 panels together for spot welds; space for spot weld nozzle

In stock

Only $28.34

Sale $19.97

Details

These pliers allow for easy clamping of sheet metal to create spot welds using your MIG welder. These pliers are included in the 13901 Spot Weld Kit.

More info...

About Spot Weld Pliers

These pliers allow for easy clamping of sheet metal to create spot welds using your MIG welder. These pliers are included in the 13901 Spot Weld Kit.


Contents

Includes: 1 Spot Weld Pliers


Customer Reviews

Questions & Answers

Customers also viewed: