• Home
  • Spotweld Cutter Pro Kit 3/8 And 1/2 Inch
Spotweld Cutter Pro Kit 3/8 And 1/2 Inch is rated 3.0 out of 5 by 9.
Rated 4 out of 5 by from Wored OK on some parts Found that these worked great when seperating thin metal from thicker metal but had problems drilling out two thin metals spot welded together. Overall I was pleased with how they worked, but still HATE spotwelds :>)
Date published: 2009-12-12
Rated 1 out of 5 by from Disaapointed Not what i expected. The bit became dull and difficult to use after 5 uses. The bit also walks even after it has started cutting. I was 10 times more satisfied with a $5 spot weld bit from harbour frieght.
Date published: 2012-06-23
Rated 1 out of 5 by from Not as advertised Needs sharpening after 4 cuts, and drill walks even after taping center and after bit starts cutting.
Date published: 2012-06-19
Rated 5 out of 5 by from Great tool! I've been using this on my 67 F-100 resto, these bits cut cleanly through the spot welds, I couldn't be happier!
Date published: 2011-08-30
Rated 4 out of 5 by from Good Stuff These work fantastic. Make sure to use cutting oil.
Date published: 2013-05-09
Rated 1 out of 5 by from Worse Spot Weld tool I've used Spot weld became dull after third spot weld to be cut. Luckily I had a few from Harbor Freight where i paid 5 dollars per spot weld cutter. Completly disappointed in the craftman ship of the tool! Consider another spot weld cutter before spending $25 dollars on something that will not last but a couple of cuts.
Date published: 2012-10-18
Rated 5 out of 5 by from Best spot weld tool I have used Best spot weld drilling tool I have used. In addition to the short bit they should offer an additional one that is longer to reach into certain spaces.
Date published: 2010-07-22
Rated 1 out of 5 by from low quality Always needed to drill a pilot hole.Also cutter seems to have dulled in approximately 40 cuts.
Date published: 2011-12-10
  • 2015-04-20T09:51CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_19004, PRD, sort_relevancy
  • clientName_eastwood

Spotweld Cutter Pro Kit 3/8 And 1/2 Inch

Item #19004 Brand: Eastwood

2 solid M2-steel cutters drill-out spot welds effortlessly

Details

Solid steel Pro Spotweld Cutter Set effortlessly drills-out spot welds Two 1-piece cutters make clean cuts through spot welds, without damaging the bottom panel, with little or no grinding required to finish the job.
  • 3/8" (10mm) diameter
  • 1/2" (13mm) diameter
  • Solid, 1-pc. M2 steel
  • Self-centering point prevents "drill walking"
  • Over 300 cuts without sharpening

More info...

About Spotweld Cutter Pro Kit 3/8 And 1/2 Inch

Professional-grade cutter totally drills-out spot welds, with little or no grinding required to finish the job. Solid one-piece cutter is machined from M2 tool steel. Self-centering point prevents "drill walking". Extremely durable and long-lasting—shop tested at over 300 cuts without re-sharpening. 3/8"-diameter cutter works for most applications; 1/2"-diameter cutter is for trucks and convertibles. Drill at 700 to 2,000 RPM.


Contents

2 Pro Spotweld Cutters: 3/8" and 1/2" diameters


Customers also viewed: