• Home
  • Spray Max Rapid Cut-in Spot Clearcoat aerosol
Spray Max Rapid Cut-in Spot Clearcoat aerosol is rated 4.6667 out of 5 by 3.
Rated 5 out of 5 by from The only clear I use. This product works great! I can't get results like this with any other clearcoat, and I have tried many of them. I kept the can in a cold garage for 2-3 days after mixing, then warmed it up in hot water before using it again, to improve flow. This allowed me to get more than the usual 24 hour pot-life. Without warming it up, it was unusable after 24 hours, just like the can says. Definitely use a respirator AND work outside AND change your clothes afterwards, because it is really noxious.
Date published: 2015-01-30
Rated 5 out of 5 by from Perfect for small motorcycle parts I needed a good clear coat to give motorcycle parts that deep clear finish - especially when coating plastic fairing pieces. Plastic fairings and covers have decorative taping and pin striping. I wanted to touch up then apply a heavy glossy coating to protect the parts. This is the only product I found that works (short of a full out spray setup). Usually I do a couple small pieces at a time. This quantity is perfect to do a few side covers and fenders. Excellent product!
Date published: 2010-11-07
Rated 4 out of 5 by from The best clear from a can This is about the best clear you will ever get out of a can. It really is an automotive finish in a can. The good news is that it is easy to apply and flows really well. The bad news is that once you activate the hardener, (built into the can) you only have about 12 hours to use the contents. The can says 24 hours, which is true, but I found that my second coat shot 22 hours after activation, came out of the can blotchy and wouldn't flow the same as the coat the day before. This left me with a lot of finish work. The can should say 12 hours, but I was happy. One of the things I liked about it was you can really finish this stuff with wet sanding and finishing compound. I would use it again. Just be sure you have everything ready to go before activating and make sure you get enough coverage. You can sand out the drips, but if you don't have enough coverage and you sand through it to the color coat after 12 hours of activation time, you will have to buy another can and this stuff isn't cheap,
Date published: 2010-07-24
  • 2015-02-28T09:26CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_50773Z, PRD, sort_relevancy
  • clientName_eastwood

Spray Max Rapid Cut-in Spot Clearcoat aerosol

Item #50773Z Brand: Spray Max

Innovative nozzle/valve, plus 2
internal chambers, ensure proper ratio

Details

2K patented aerosol allows you to paint with a two component paint with no mixing! Spray Max's innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You'll get professional results from an aerosol. Pot life 24 hours. Rapid cut in spot clear can be applied over any base coat, dry time 1-2 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight. Made in Germany

More info...

About Spray Max Rapid Cut-in Spot Clearcoat aerosol

2K patented aerosol allows you to paint with a two component paint with no mixing! Spray Max's innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You'll get professional results from an aerosol. Potlife 24 hours. Rapid cut in spot clear can be applied over any base coat, dry time 1-2 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight. Made in Germany


Product Information Sheet

Click here to view product information sheet