- Standard Manifold Smoothing Kit
Standard Manifold Smoothing Kit
Item #46076 Brand: Eastwood
grinder, smooth-out rusted surfaces
After metal is smoothed, apply one of our high temp. coatings. Your rustproof manifold will keep that new look for years. Instructions included.
About Standard Manifold Smoothing Kit
The easy way to restore that showroom appearance to old or neglected cast iron manifolds, these kits are used with your high-speed die grinder to level rusted pitted surfaces. The Standard Kit consists of twenty 80 grit abrasive cylinders and ten each of 80 grit tapers, 120 grit cylinders and 120 grit tapers. Two mandrels are also included. The Deluxe kit adds a carbide bead burr for faster cutting, to remove casting flash or shape the metal for a custom look. After metal is smoothed, apply one of our high temp. coatings. Your rust-prone manifold will keep that new look for years. Instructions incl.
The Standard Exhaust Manifold Smoothing Kit includes the following abrasive rolls: (20) 80 grit cylinders, (10) of each of the following: 80 and 120 grit tapers, and 120 grit cylinders, (2) 4" abrasive roll mandrels and complete instructions.
Replacement abrasive rolls in 80 grit (13091A) cylinder, (13090A) taper and 120 grit (13089A) cylinder, (13088A) taper and abrasive roll mandrels (13122) 4" are available separately.
Once heavy pits have been removed a natural cast roughness can be imparted by gently hammering the back of a piece of 36 or 40 grit sandpaper against the smoothed manifold surface.
Customers also viewed:
Grinders GreaseOnly $9.99
Lightweight, compact air die grinder for porting or detail-polishing
Tough, flexible, crystal clear barrier keeps metal looking brightOnly $10.99