Standard Manifold Smoothing Kit

Be the first to review this product


Quick Overview

50 abrasive sleeves, plus your
grinder, smooth-out rusted surfaces

Standard Manifold Smoothing Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Standard Manifold Smoothing Kit
  • Standard Manifold Smoothing Kit


The easy way to restore that showroom appearance to old or neglected cast iron manifolds, these kits are used with your high-speed die grinder to level rusted pitted surfaces. This Standard Kit consists of twenty 80-grit abrasive cylinders and ten each of 80-grit tapers, 120-grit cylinders and 120-grit tapers. Two mandrels are also included.
After metal is smoothed, apply one of our high temp. coatings. Your rustproof manifold will keep that new look for years. Instructions included.

Additional Information

Air Pressure No
Air Volume No
Media Capacity No
Application The Exhaust Manifold Smoothing Kit allows the user to quickly level rough casting marks and grind away corrosion pits as a means to prepare the manifold for coating with one of our Exhaust Manifold Coatings. Typically the Smoothing Kit would be used after abrasive blasting. Included mandrels have a 1/4" shaft. Note: Face, eye and hand protection are recommended when using this kit.
Size/Content The Standard Exhaust Manifold Smoothing Kit includes the following abrasive rolls: (20) 80 grit cylinders, (10) of each of the following: 80 and 120 grit tapers, and 120 grit cylinders, (2) 4" abrasive roll mandrels and complete instructions.
Accessories Replacement abrasive rolls in 80 grit (13091A) cylinder, (13090A) taper and 120 grit (13089A) cylinder, (13088A) taper and abrasive roll mandrels (13122) 4" are available separately.
FAQ's Once heavy pits have been removed a natural cast roughness can be imparted by gently hammering the back of a piece of 36 or 40 grit sandpaper against the smoothed manifold surface.
Safety Info No

You may also be interested in the following product(s)

Grinders Grease

Grinders Grease

1/4" Pneumatic Die Grinder

1/4" Pneumatic Die Grinder

Eastwood Diamond Clear Gloss/Metal Surfaces

Eastwood Diamond Clear Gloss/Metal Surfaces


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.