- Eastwood TIG Welder 200 Amp AC/DC
Eastwood TIG Welder 200 Amp AC/DC
Item #12746 Brand: Eastwood
Eastwood TIG 200 Welder...industrial TIG features at a DIY price!
- Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
- 1/4"-thick welding capacity
- High-frequency start for precise arc control
- Square-wave inverter for accurate aluminum welding
- "WP-17"-type torch accepts common cups and collets, up to 1/8" electrodes
- Duty cycle: 45% at 150 amps
- Backed by Eastwood's no-hassle return policy and 3-year warranty.
The specially engineered 200-amp Eastwood TIG Welder offers affordable, professional-quality TIG welding on aluminum, stainless or steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 1/4" thick.Get this TIG 200 Welder PLUS our Plasma Cutter and SAVE BIG! Click here to see our money-saving TIG200 Welder and Versa Cut Plasma Cutter Kit!
About Eastwood TIG Welder 200 Amp AC/DC
Eastwood TIG200 200AMP welder features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional welding machine. It has pre- and post-flow adjustment knobs to protect your weld and torch. It even has a foot pedal to control amperage so you can get going quickly, without the need to dial-in the machine for a specific material. Powered through a NEMA50 plug.
Automatically switches from 110v to 220v depending on input. Infinitely adjustable foot pedal and amperage control allow accurate aluminum welding, and adjustable pre- and post-gas flow results in proper arc starting, stabilization and bead cool-down. Thumb control overrides the foot pedal for out-of-position welding, or when bench welding is not an option. This exceptional Eastwood TIG Welder is backed by Eastwood's no-hassle 3-year warranty.
Shielding Gas Regulator
Shielding Gas Hose
Ground Cable with Clamp, 10'
TIG Torch (17 Series), 14'
Foot Pedal for Amperage Control
110v-to-200v Adapter Plug
#7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16")
Long Back Cap, Short Back Cap
3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet
Thoriated Tungsten (2.0mm Red)
Input Voltage: Single-Phase 110vAC or 220vAC (±15%) @ 50-60Hz
Input Amperage: 28 amps
Output Amperage: 10-200 amps AC/DC
No-Load Voltage: 51
AC Duty Cycle (%): 20-80 (80% at 100 amps, 20% at 200 amps)
Post Gas Flow: 2-8 sec.
Pre Gas Flow: 0.1-1.0 sec.
Remote Foot Pedal And Control: Yes
Torch: Standard WP-17
Torch Control: Finger on/off control/Variable foot pedal
Overall Dimensions:19.1” (486 mm) x 9.8” (248 mm) x 20.0” (508 mm)
Approximate Weight: 61 lbs.
Cleaning/clearance effect (AC balance control) is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive).
Frequency is fixed at 60Hz, which provides a little wider bead but with good penetration for aluminum and magnesium.
Inverter and MOSFET technology offer optimum performance at a very affordable price.
The Rated Duty Cycle refers to the amount of welding that can be done within an amount of time. The Eastwood TIG 200 has a duty cycle of 45% at 150 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 150 Amps with a 45% Duty Cycle, within a 10 Minute block of time you can weld for 4.5 Minutes with 5.5 Minutes of cooling for the welder. To increase the Duty Cycle you can turn down the Amperage Output control. Going above 150 Amps will yield a lower duty cycle.
Accessories & Consumables
1/6 Inch Collet Body
3/32 Inch Collet Body
Eastwood TIG 200 AC/DC Foot Pedal Upgrade
TIG Torch Rear Back Cap
3/8 Inch Diameter Ceramic Nozzle for TIG-200
7/16 Inch Diameter Ceramic Nozzle for TIG-200
1/16 Inch Diameter Torch Collet for TIG-200
3/32 Inch Diameter Torch Collet for TIG-200
1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel Tig Wire
3/32 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
1/16 Inch E3(purple) TIG Tungsten
3/32 Inch E3 (purple) TIG Tungsten
2 Pack Stainless Steel Scratch Brush
TIG Welding Cart
Auto Darkening Welding Helmet
Large View Auto Darkening Helmet
Customers also viewed:
Rocker style, precision foot pedal control for 12746 Eastwood TIG 200 AC/DCOnly $99.99
BIG savings on our Plasma Cutter and TIG Welder Kit!Only $1,449.99
Tackle precision fabrication tasks in your garage.Only $499.99
MAJOR savings on our TIG Welder, Plasma Cutter & Cart Kit!
Save when you buy them as a set for TIG welding and plasma-cutting jobs