• Home
  • Eastwood Pro Fab Kit - AC/DC TIG Welder & Plasma Cutter
Eastwood Pro Fab Kit is rated 4.8333 out of 5 by 6.
Rated 5 out of 5 by from TIG PLASMA COMBO I am an experienced welder with 19yrs welding and am very pleased with this equipment. I would definitely recommend this buy
Date published: 2015-02-18
Rated 5 out of 5 by from Pro Fab Kit. Nice unit, great price. The units were well packaged with no shipping damage. I have never Tig welded before but read through the instructions and checked Eastwood's videos and was able to weld a bead one the first try. The plasma cutter set up and worked well also. Had no experience with the plasma cutter either but was able to cut almost immediately. Going to go for that refresher welding class now. Very pleased with the quality of these Eastwood units. I had been watching the price of the Pro Fab kit for months and the sale price was great. Couldn't be happier with this Eastwood product.
Date published: 2013-12-15
Rated 5 out of 5 by from Can't Beat it I bought this about 6 months ago and love it. I tried another brand but had nothing but issues with it, these units perform like magic. The plasma cut hevy duty diamond plate like butter. I cut all the parts for the rebuild of my tractor bucket with it and used the tig on bout steel and aluminum. I just couldn't ask for a better performing tool to my shop. Thanks Eastwood
Date published: 2013-12-13
Rated 5 out of 5 by from Quick deliverary, great equipment, easy to use I got the plasma 60 and tig 200, I have never used a tig or plasma before. When units showed up I put them together to use. Eastwood sent me a great video on how to use the tig and another video on the plasma. Very informative videos, when I sat down to use I did all steps learned, first cut with plasma flawless, cut with ease I showed a nabor kid and my sun they usesed as well. When I fired up tig my fist weld was perfect like the one in video, the nabor kid and my sun did just as well. These units are a great price good quality, the cart is just as good, east woods video info for a beginner was vary good love to see more. If you are looking to buy I highly recomend there units. Thanks Jess
Date published: 2014-12-29
Rated 4 out of 5 by from Great combination Units arrived in good shape and worked when unpacked.i will write an other review after I use them for a project.
Date published: 2014-11-21
Rated 5 out of 5 by from Pro Fab Kit Have not got to use it as much ,but what I have seems real good. Nice units.
Date published: 2015-01-07
  • 2015-05-02T09:34CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_14390, PRD, sort_relevancy
  • clientName_eastwood

I am interested in welding stainless steel and eventually titanium motorcycle exhaust systems. Is this machine capable?

Asked by: JohnBy
Yes the TIG 200 with the correct consumables is able to weld any alloy
Answered by: SeanA
Date published: 2015-03-05

Can u weld aluminum with it? 

Asked by: Speedy JC
Yes the TIG AC/DC is designed for welding Aluminum
Answered by: SeanA
Date published: 2015-01-19

If you need to buy any replacement parts for this Tig welder or the Plasma cutter, where does the consumer purchase them thru ?

Asked by: wildman318
All consumables can be purchased either through us or a local welding supplier All replacement parts on the unit (IE: Torch, liners, solenoids, ect) would be through us at Eastwood (3 year warranty and after warranty purchased)
Answered by: SeanA
Date published: 2014-12-27

Can you adj. the amperage while you weld with the foot control by how far it is depressed or is it set by the amperage dial on the foot control. Can you weld with DCEP or only DCEN?

Asked by: moparmike
Yes, the foot pedal will vary the amperage depending on how far it is pressed. You will dial in the amperage control on the pedal to the maximum that you wish to use, and then you can throttle it anywhere from 0 to your maximum set amperage. Both our TIG 200 DC and TIG 200 AC/DC are designed for DCEN only, not DCEP.
Answered by: MikeL
Date published: 2014-11-19

If this is a 200 amp Tig welder how come you have such a short post flow. Post flow should be set at 1 sec. per 10 amps so you should have 20 sec. capability?

Asked by: moparmike
With TIG welding there is no absolute rule for post flow. Many times other welders and "book values" recommend wildly high post flow times that mainly waste shielding gas. Post flow time will vary, based mostly on what kind of material you are welding and the thickness of that material. The most important thing is to keep the hot tungsten shielded while it's red-hot and to keep the puddle shielded while it's still molten. Once the puddle solidifies and the tungsten cools, there should no longer be a need for shielding gas. More sensitive materials like stainless or exotic metals might require more post flow, especially in critical industrial applications, but the same general rules apply as with steel during normal hobby or automotive use. The weld puddle should only need to be shielded while it's still molten. When welding, pay attention to the color of the tungsten after it cools. If it is becoming blackened or otherwise changing colors, increase the post flow time. If it's not drastically changing color, the post flow time is sufficient. If you find that you need additional post flow time, quickly tapping the foot pedal or trigger will restart the post flow cycle so you can keep the material shielded for as long as is necessary.
Answered by: MikeL
Date published: 2015-03-30

Can you use this to stick weld?

Asked by: Cowanjack3
No, the TIG is not stick capable. You would want to look into our MIG 200 Wire/Stick unit
Answered by: SeanA
Date published: 2015-02-22

Can you use the spool gun with this welder?

Asked by: bmanindiana
  • 2015-05-02T09:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_14390, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Pro Fab Kit - AC/DC TIG Welder & Plasma Cutter

Item #14390 Brand: Eastwood

BIG savings on our Plasma Cutter and TIG Welder Kit!


Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut 60 Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

Eastwood-engineered TIG welder, the TIG 200 AC/DC Welder, offers professional-quality TIG welding at an affordable price!
  • Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
  • 1/4"-thick welding capacity
  • High-frequency start for precise arc control
  • Square-wave inverter for accurate aluminum welding

The Eastwood Versa Cut 60 Plasma Cutter works with 220v input to easily slice through steel, stainless and aluminum as thin as 24-gauge or as thick as 7/8".
  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Built-in pilot arc system
  • Internal moisture separator

More info...

About Eastwood Pro Fab Kit - AC/DC TIG Welder & Plasma Cutter

This kit includes the Eastwood TIG200 AC/DC Welder and The Eastwood Versa Cut 60 Plasma Cutter. Buy this TIG welding kit and save over individual pricing.


Includes: 12746 and 14099


Always wear approved eye protection and gloves. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.

Customers also viewed: