- Eastwood Pro Fab Kit - AC/DC TIG Welder & Plasma Cutter
Eastwood Pro Fab Kit - AC/DC TIG Welder & Plasma Cutter
Item #14390 Brand: Eastwood
Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut 60 Plasma Cutter!
Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!Eastwood-engineered TIG welder, the TIG 200 AC/DC Welder, offers professional-quality TIG welding at an affordable price!
- Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
- 1/4"-thick welding capacity
- High-frequency start for precise arc control
- Square-wave inverter for accurate aluminum welding
The Eastwood Versa Cut 60 Plasma Cutter works with 220v input to easily slice through steel, stainless and aluminum as thin as 24-gauge or as thick as 7/8".
- 220v AC input
- 20' torch cable; 10' ground cable with clamp
- Rated 60-amp output
- Built-in pilot arc system
- Internal moisture separator
About Eastwood Pro Fab Kit - AC/DC TIG Welder & Plasma Cutter
Weld it all with the Eastwood TIG200 200AMP welder! The TIG200 features an
AC/DC switch that allows both steels and aluminum to be welded with the same
machine. With a 14' torch and a 10' ground cable, you'll be able to get into
any space with this exceptional machine. It has pre/post flow adjustment knobs
to protect your weld and torch. If that's not enough it even has a foot pedal
to control amperage so you can get going quick and not need to dial in the
machine for a specific material. Included is the TIG200, torch, ground
cable/clamp, regulator/hose, and is powered through a NEMA50 plug.
Our Eastwood-designed portable plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 7/8". The Versa-Cut 60 requires a 50 amp breaker. Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
What is "Plasma Cutting"? A plasma cutting machine utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000 degrees F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving a clean, precise cut.
- TIG200 Unit
- Shielding Gas Regulator
- Shielding Gas Hose
- Ground Cable with Clamp (10ft)
- TIG Torch (17 Series) which accepts industry standard cups, collets, and collet bodies (14ft)
- Foot Pedal for Amperage Control
- 110v to 200v Adapter Plug
- Hand Held Shield
- #7 Cup (7/16”),#6 Cup (3/8”),#5 Cup (5/16”)
- Long Back Cap,Short Back Cap
- 3/32” Collet Body,3/32” Collet,1/16” Collet,2.0mm Collet
- 2.0mm Red (Thoriated Tungsten)
Versa Cut 60
Includes: Versa Cut unit, torch assembly, ground clamp assembly
TIG 200 AC/DC Specs
•Input voltage: single phase 110 or 220 VAC (+/- 15%) @ 50-60Hz
•Input amperage: 28 amp
•Output amperage: 10-200amp AC/DC
•No-load voltage: 51
•AC duty cycle (%): 20-80 (80% at 100 amp- 20% at 200 amp)
• Pulse duty cycle (%): 10-90
•Post gas flow: 2-8 sec
•Pre gas flow: 0.1-1 sec
•Remote foot pedal and control: yes
•Efficiency: (%): 80
•The cleaning/clearance effect (AC balance control) of our unit is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive
)•The frequency is fixed at 60Hz which provides a little wider bead but with good penetration for aluminum and magnesium.
•Our Tig 200 is constructed with inverter and MOSFET technology for optimum performance at a very affordable price.
Versa Cut 60 Specs
- •60-amp output
- • 220-volt AC input
- •60 or 50Hz output
- •60% duty cycle at 60 amps
- •40 lbs.
TIG Welding Cart
Auto Darkening Welding Helmet
Large View Auto Darkening Helmet
1/6 Inch Collet Body
3/32 Inch Collet Body
TIG Torch Rear Back Cap
3/8 Inch Diameter Ceramic Nozzle for TIG-200
7/16 Inch Diameter Ceramic Nozzle for TIG-200
1/16 Inch Diameter Torch Collet for TIG-200
3/32 Inch Diameter Torch Collet for TIG-200
1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
1/16 Inch E3(purple) TIG Tungsten
3/32 Inch E3 (purple) TIG Tungstenl
2 Pack Stainless Steel Scratch Brush
Always wear approved eye protection and gloves. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.
Customers also viewed:
200-amp TIG Welder welds steel & aluminum up to 1/4" on 110v or 220v
Clean, fast cuts thru steel and aluminum up to 3/8"; 110v or 220vOnly $549.99
Save hundreds on this Plasma Cutter and TIG Welder Kit!Only $949.99
Powerhouse slices thru 7/8" steel and aluminum. 220v only.
MAJOR savings on our TIG Welder, Plasma Cutter & Cart Kit!