• Home
  • TIG200DC Welder
Eastwood TIG Welder 200 Amp DC is rated 4.722222222222222 out of 5 by 18.
Rated 4 out of 5 by from Sweet little machine I purchased this machine a couple weeks ago and haven't used it until today. After laying my first bead I was impressed with the arc stability. The rheostat seems to have a real nice adjustment range on it, and isn't overly sensitive. So far I like this machine a lot. I do a lot of welding where I need nice clean welds that you just can't get with a Mig welder. The only reason I gave it 4 stars, and not 5 is because the Post Flow is way too long, and not adjustable, and tends to waste gas, which can get expensive. An adjustable post flow, or even cutting the post flow time down to 2 seconds would be awesome.
Date published: 2015-01-12
Rated 5 out of 5 by from Excelent I haven't had a chance to get into the project yet. But I set the machine up and ran a couple of beads. The machine has great start aka easy arc, and really consistent arc thru the invite bead. I like it very much. I'm looking forward to working with this machine. Overall areally good bargain at twice the price. Thank you Eastwood, looking forward to doing business again. Sincerely:Jim west
Date published: 2015-09-21
Rated 5 out of 5 by from Great Value I bought this to weld 18 gauge sheet metal. I've only used it at 110v and so far it is working fine. An excellent value for the price.
Date published: 2014-05-27
Rated 4 out of 5 by from Good Tig for the price I bought this welder about 7 months ago and have used it alot and love it,works ok on 110 for thinner stuff but on 220 it rips really well.Foot pedal could be alot better and that the only reason for the 4 starts
Date published: 2014-11-12
Rated 5 out of 5 by from Great Value Bought it to upgrade my roll cage to met SFI 25.5. It has plenty of power for .112 w chrome moly tubing. Weld like a high end unit! Adjustable Gas shutoff time would be nice.
Date published: 2014-08-06
Rated 5 out of 5 by from Great welder!!! Good quality! I bought this a month ago and have used it to weld some stainless and mild steel. Nice steady arc high frequency start works great, I am loving it. I have welded with a expensive Miller and Lincoln and you couldn't tell the difference. Very satisfied, my only complaint is I wish I would have stepped up for the ac/DC machine.
Date published: 2015-12-15
Rated 5 out of 5 by from Great Machine I bought this on new years, was a great deal. Works awesome. Does everything I need it to do to update the chassis cert and finish a turbo set up, for my drag car. Really happy that I made the purchase. Thanks Eastwood.
Date published: 2015-01-15
Rated 5 out of 5 by from A very good unit for the hobbist My hobby is making gas tanks and underseat toolboxes for motorized bikes. I weld .048 sheet metal at low amp settings and this unit works great at 110v. The only problem was with the Argon regulator and Eastwood took care of that super fast. This is excellent to use and after I weld the parts up I powdercoat them with an Eastwood powdercoat setup(which is also an excellent buy) I highly recommend Eastwood products,these people do their homework.
Date published: 2013-11-16
  • 2016-08-25T07:54CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_14100, PRD, sort_relevancy
  • clientName_eastwood

Does it come with the finger control or is it separate? If so, what is the part number?

Asked by: gypcmechanic
It comes with a finger switch. You'll have to build your own amperage thumbwheel. It isn't dificult if you understand electronics.
Answered by: BillyZoom
Date published: 2016-06-14

I bought this machine last week. I would like to adjust the pre and post flow, is there any way I can adjust this? 

Asked by: Tony Wu
The Pre and post flow on the TIg 200DC are pre programmed into the board.
Answered by: S Church
Date published: 2016-04-11

what kind of gas it takes

Asked by: ebaumk
You will want to use 100% argon with this unit for most types of welding.
Answered by: S Church
Date published: 2016-04-04

What is the weight of this welder?

Asked by: Ralph7647
This unit weighs in at 36 LBS.
Answered by: S Church
Date published: 2016-03-29

With this machine can you unhook the foot pedal and just use the tig torch?

Asked by: Dragracingkid47
You can certainly just use the Torch with the finger control to activate the arc.
Answered by: S Church
Date published: 2016-03-29

Will this unit "lift start" an arch?

Asked by: Bruce31
This unit is a high frequency start machine and will not require a "lift or scratch" start.
Answered by: S Church
Date published: 2016-03-23

What are the dimensions of this machine?

Asked by: PA TX
Approx 14" x 6.5" x 12" high to the top of the handle.
Answered by: JimLev
Date published: 2016-01-24

argon gas what I was giving was 75% argon and 25% co2 is this what I need

Asked by: glafka
No, TIG welding of any type will always require 100% argon, not a "MIG mix" of 75% argon and 25% CO2.
Answered by: MikeL
Date published: 2016-01-15
  • 2016-08-25T07:56CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_14100, PRD, sort_recentAnswersFirst
  • clientName_eastwood

TIG200DC Welder

Item #14100 Brand: Eastwood

Tackle precision fabrication tasks in your garage.

Details

The Eastwood TIG 200DC is designed for the enthusiast wanting the benefits of TIG welding steel and stainless without the cost of an AC inverter. The TIG200DC is one of the easiestTIGs on the market for set up and use and also includes the most features. A must for anyone wanting to get started in TIG welding!

  • 10-200 amp DC output inverter power supply
  • 3/16" capacity in steel and stainless steel
  • Remote pedal with variable amperage control
  • High frequency start for precise arc control
  • Internal pre gas flow set at 0.2 sec and post gas flow set at 5 sec

*Please note: This welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 Amp AC/DC welder which has the high frequency AC setting needed to properly weld aluminum.


More info...

About TIG200DC Welder

110 or 220 volt, 50 to 60Hz, 200 amp output DC TIG welder. Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Welds steel and stainless steel up to 3/16 inch thick. Amperage adjustable from 10 to 200 amp,WP 17 style torch accepts all common electrodes and collets up to 1/8 inch.High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.


Contents

•TIG 200 DC Unit with NEMA50-P Plug
•Shielding Gas Regulator
•Shielding Gas Hose
•Ground Cable with Clamp
• #17 TIG Torch (14’)
• Foot Pedal for Amperage Control
• 110-120 VAC to 220-240 VAC Adaptor Plug
• Instruction Manual
• Hand Held Shield
• Hammer/Brush
• #7 Cup (7/16”)
• #6 Cup (3/8”)
• #5 Cup (5/16”)
• Long Back Cap
• Short Back Cap
• 3/32” Collet Body
• 3/32” Collet
• 1/16” Collet
• 2.0mm Collet
• 2.0mm Red (Thoriated Tungsten)


Accessories & Consumables

20458 TIG Finger Protection Kit
20493 TIG 200 DC Welder Foot Pedal Upgrade
13953 Eastwood TIG Consumables Kit
1/6 Inch Collet Body
3/32 Inch Collet Body
TIG Torch Rear Back Cap
3/8 Inch Diameter Ceramic Nozzle for TIG-200
7/16 Inch Diameter Ceramic Nozzle for TIG-200
1/16 Inch Diameter Torch Collet for TIG-200
3/32 Inch Diameter Torch Collet for TIG-200
1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel Tig Wire
3/32 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
1/16 Inch E3(purple) TIG Tungsten
3/32 Inch E3 (purple) TIG Tungsten
2 Pack Stainless Steel Scratch Brush

Accessories

TIG Welding Cart
Auto Darkening Welding Helmet
Welding Jacket
Large View Auto Darkening Helmet
Welding Gloves


Safety

Always where eye, hand and face protection when welding.


Warranty

Three year warranty against manufacturer's defects.


Instructions

Click here for product instructions


Customers also viewed: