• Home
  • Eastwood TIG Welder 200 Amp DC
Eastwood TIG Welder 200 Amp DC is rated 4.8571 out of 5 by 7.
Rated 5 out of 5 by from Great Little Machine Bought to use in my home shop, works great! So far 2 - ATV frames, 2- 10 point roll cages some engine cases (aluminum), Welds as nice as our MIller at work for 1/10 of the cost! Excellent for what i wanted it for, only thing is the foot petal is different than what every other uses. Highly Recomended! Eastwood Tech Note: First, thank you for the great review! Wanted to note for other customer's reading this review that this Model #14100 is our DC TIG which does a great job on Steel and Stainless Steel but will not weld aluminum. It's possible TonyB has our AC/DC TIG Welder which will weld aluminum.
Date published: 2013-03-25
Rated 5 out of 5 by from Great Value I bought this to weld 18 gauge sheet metal. I've only used it at 110v and so far it is working fine. An excellent value for the price.
Date published: 2014-05-27
Rated 5 out of 5 by from Great Value Bought it to upgrade my roll cage to met SFI 25.5. It has plenty of power for .112 w chrome moly tubing. Weld like a high end unit! Adjustable Gas shutoff time would be nice.
Date published: 2014-08-06
Rated 4 out of 5 by from Good Tig for the price I bought this welder about 7 months ago and have used it alot and love it,works ok on 110 for thinner stuff but on 220 it rips really well.Foot pedal could be alot better and that the only reason for the 4 starts
Date published: 2014-11-12
Rated 5 out of 5 by from Tig welder 200 amp dc I bought this to do a custom stainless steel turbo mount set up on my truck. This Main reasons I bought this one was the price and that you control the welder with the tourch handle or the pedal
Date published: 2014-11-13
Rated 5 out of 5 by from A very good unit for the hobbist My hobby is making gas tanks and underseat toolboxes for motorized bikes. I weld .048 sheet metal at low amp settings and this unit works great at 110v. The only problem was with the Argon regulator and Eastwood took care of that super fast. This is excellent to use and after I weld the parts up I powdercoat them with an Eastwood powdercoat setup(which is also an excellent buy) I highly recommend Eastwood products,these people do their homework.
Date published: 2013-11-16
Rated 5 out of 5 by from tig 200 This was the best move I made great unit and the price was great.
Date published: 2014-12-21

any benefits to using 220 instead of 110 power source?

Asked by: mr anderson
There's no specific advantage to running the machine on a 220v circuit, it simply allows you to use the machine to its potential. On 110v systems your amperage output will be limited because of the lower supplied electrical current.
Answered by: MikeL
Date published: 2014-12-16

What is the amp requirement for the 110V circuit?

Asked by: PhilG
A 30 amp Circuit will work well for 120volts
Answered by: Boyhowdy2112
Date published: 2014-12-16

What is the duty cycle on this machine?

Asked by: Mycakers
60% @ 150A
Answered by: MikeL
Date published: 2014-12-15

Where are the eastwood welders made

Asked by: rico1
The unit is designed from our R&D team and made over in China by our private manufacturer
Answered by: SeanA
Date published: 2014-12-10

Does this welder have pulse?

Asked by: Codedog
No, the unit does not have a pulse feature.
Answered by: SeanA
Date published: 2014-11-25

Does it come with a gas regulator

Asked by: josh1
Yes it comes with a gas regulator
Answered by: SeanA
Date published: 2014-12-01

will this machine weld alum? if so, what is the max thickness?

Asked by: big walt
The DC TIG will not weld aluminum. Our AC/DC TIG will weld aluminum up to 1/4" http://www.eastwood.com/tig-welders-eastwood-tig-ac-dc-welder.html
Answered by: NickC
Date published: 2014-10-16

Can a stinger be used to make make it into a SMAW  ( 6011 & 7018 )? If it can will it weld aluminum rods designed for DC ?

Asked by: Jaket
No, it is not intended to be used as a stick welder, only standard TIG use with the hand control or foot pedal.
Answered by: MikeL
Date published: 2014-11-24

Eastwood TIG Welder 200 Amp DC

Item #14100 Brand: Eastwood

Tackle precision fabrication tasks in your garage.
Heavy Item - Special shipping charges may apply.

Details

Weld steel and stainless steel up to 3/16 inch thick*

Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Amperage adjustable from 10 to 200 amp, WP 17 style torch accepts all common electrodes and collets up to 1/8 inch. High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.
  • 110 or 220 volt
  • 50 to 60Hz
  • 200 amp output DC TIG welder.

    *Please note: This welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 Amp AC/DC welder which has the high frequency AC setting needed to properly weld aluminum.

More info...

About Eastwood TIG Welder 200 Amp DC

110 or 220 volt, 50 to 60Hz, 200 amp output DC TIG welder. Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Welds steel and stainless steel up to 3/16 inch thick. Amperage adjustable from 10 to 200 amp,WP 17 style torch accepts all common electrodes and collets up to 1/8 inch.High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.


Contents

200 amp output, 110 or 220 Volt AC input, 60 or 50Hz output. 36lb weight


Accessories

13953 Eastwood TIG Consumables Kit

12253 TIG Wire ER70S-2 1/16-36in 1 lb Tube


Safety

Always where eye, hand and face protection when welding.


Warranty

Three year warranty against manufacturer's defects.


Instructions

Click here for product instructions


Customers also viewed: