• Home
  • Eastwood Trim Hammer & Anvil Kit
Eastwood Trim Hammer & Anvil Kit is rated 3.6667 out of 5 by 9.
Rated 5 out of 5 by from Usefull great little tool I bought this anvil and hammer set to work on my 1965 International travelette pick up trick. I needed to straighten the door side mouldings, the head light rings and the side markers light rings. It took me several hours to do each piece the anvil worked excellent all trims are different some are flat others are cancave and it wont fit exactly on every piece. But I was able to straightened them up. Part of the restoration hobby is to find away to fix something and have fun. The hammer is as much of a good looking tool as well made and works excellent good weight balance and grip.
Date published: 2014-11-07
Rated 2 out of 5 by from The anvil is junk... The hammer is okay...but had to trim the edges as it put dimples in the trim....might have been the dipped anvil ( not straight on the leve part). The anvil is junk. I have yet to find a piece of stainless trim that will fit the anvil....not one piece out of two cars....a 49 chevy and 51 ford. Again....even the flat part is dipped down....cost me two pieces of stainless as it streched the trim beyond fixing....it actually cost me money vs saving me money. Would love for someone to show me one piece of stainless that can be fixed with this product.
Date published: 2013-01-24
Rated 4 out of 5 by from A useful addition to my pile of tools for trim I bought this tool for straightening stainless steel trim on my Studebaker. The anvil is very light weight. What worked for me was to clamp the anvil in a heavy vise position the dent in the trim over the end of the anvil and tap tap tap with the hammer. Came out pretty good for an amateur.
Date published: 2015-01-23
Rated 4 out of 5 by from Just what I was looking for This hammer and anvil kit is just what I was looking for. Restoring my first car, 1964 Oldsmobile Cutlass, and trying to straighten some of the trim pieces myself. So far this kit has done the trick along with some of Eastwoods videos. Thanks again.
Date published: 2015-01-25
Rated 4 out of 5 by from Very Good I have found these very useful. the hammer is small enough to get to most places on the trim. Unfortunately I am not that good at straightening parts. The video from Eastwood on straightening and polishing was also helpful.
Date published: 2014-02-12
Rated 5 out of 5 by from Very nice Product This is a very nice product it is saving me a lot of money I am using it on my stainless steal trim and it is coming out real clean just have to take your time when doing the job it is not that hard to do.
Date published: 2012-10-01
Rated 4 out of 5 by from This is an exellent tool I have been practicing on some trim on a mustang and find the very useful for this purpose. I would say the quality of the hammer could be better but it does the job.
Date published: 2015-02-14
Rated 1 out of 5 by from Trim hammer and anvil kit. The anvil is not flat. The hammer end is not round or flat. The other end of the hammer is made on an angle. Quality is awful other than the handle.
Date published: 2014-12-17
  • 2015-05-06T08:32CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_11968, PRD, sort_relevancy
  • clientName_eastwood

# 11968 anvil is it made of steel or cast iron?

Asked by: larz
Anvil is made out of cast iron
Answered by: SeanA
Date published: 2014-12-19
  • 2015-05-06T09:39CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_11968, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Trim Hammer & Anvil Kit

Item #11968 Brand: Eastwood

Straighten delicate stainless trim like
a pro with this hammer/anvil set!

Details

The Trim Anvil is contoured to suit many trim forming needs. Includes conical and pyramid tapered horns and square flat center. Measures 5-1/4" long by 1"wide by 2-7/8" tall, weighs 8 ounces. The Eastwood Trim Hammer Makes Dent Repair Simple. It is ideally suited for fine trim repair. Use the face to remove dents in flat stainless trim and the cross peen to get tight edges and corners.The drop-forged head is hardened and tempered. Head weight 3 1/3 ounces and overall length is 4". Mounted on a hickory handle with exceptional balance and feel. Include 13146 hammer & 13336 anvil

More info...

About Eastwood Trim Hammer & Anvil Kit

The Trim Anvil is contoured to suit many trim forming needs. Includes conical and pyramid tapered horns and square flat center. Measures 5-1/4" long by 1" wide by 2-7/8" tall, weighs 8 ounces. The Eastwood Trim Hammer Makes Dent Repair Simple. It is ideally suited for fine trim repair. Use the face to remove dents in flat stainless trim and the cross peen to get tight edges and corners. The drop-forged head is hardened and tempered. Head weight 3 1/3 ounces and overall length is 4". Mounted on a hickory handle with exceptional balance and feel. Include 13146 hammer & 13336 Anvil


Contents

Include 13146 hammer & 13336 Anvil


Accessories

31198 7pc hammer & dolly set
28241 reposse hammer
11866 how to restore trim
10049z Tin Zinckit


Safety

always wear eye, skin and respiratory protection