- Home
- Under Gone Undercoating Remover Aerosol 17 oz
Details
Undercoat removal gets no easier than this—just spray and scrape!
Under Gone™ Undercoat Remover softens rubberized undercoatings and tar so they can be easily removed by scraping. A must for surfaces to be welded.
- Removes undercoatings that can be imprinted with a fingernail
- Non-toxic, non-corrosive, CFC-free, biodegradable
- 17-oz. aerosol can
Rust Encapsulator Black 15 oz.aerosolOnly $19.99 Sale $14.99 |
About Under Gone Undercoating Remover Aerosol 17 oz
Undercoat removal made easy! Here's the solution for undercoats that can be imprinted with a thumbnail. Biodegradable undercoat remover quickly loosens the bond of the undercoating to the base metal and allows you to easily scrape it loose. Use PRE Painting Prep to remove any remaining residue for a "paint ready" surface. Not for use on baked-on, epoxy or urethane undercoatings. For cleaning up an area to be welded, this is a must! 17 oz. net wt. aerosol.
One aerosol can contains 17 oz of Undercoating Remover.
Non-toxic, non-corrosive, CFC-free, Biodegradable
Shake can thoroughly before, and periodically during, use. Spray-apply to a 12" square area and allow to penetrate for 30 seconds to 2 minutes. Then scrape loosened undercoating from surface. Reapply if necessary to remove heavy applications.
NOTE: Will remove paint! Rinse painted surfaces immediately with water to avoid damage. Do not use for removal of baked-on, epoxy or urethane coatings.
NOTE: Will remove paint! Rinse painted surfaces immediately with water to avoid damage. Do not use for removal of baked-on, epoxy or urethane coatings.
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|