• Home
  • Under Gone Undercoating Remover Aerosol 17 oz

    Under Gone Undercoating Remover Aerosol 17 oz

    Item #31130 Z

    Easy removal of undercoating
    and tar -- just spray and scrape!


    Undercoat removal gets no easier than this—just spray and scrape! Under Gone™ Undercoat Remover softens rubberized undercoatings and tar so they can be easily removed by scraping. A must for surfaces to be welded.
    • Removes undercoatings that can be imprinted with a fingernail
    • Non-toxic, non-corrosive, CFC-free, biodegradable
    • 17-oz. aerosol can

    More info...

    About Under Gone Undercoating Remover Aerosol 17 oz

    Undercoat removal made easy! Here's the solution for undercoats that can be imprinted with a thumbnail. Biodegradable undercoat remover quickly loosens the bond of the undercoating to the base metal and allows you to easily scrape it loose. Use PRE Painting Prep to remove any remaining residue for a "paint ready" surface. Not for use on baked-on, epoxy or urethane undercoatings. For cleaning up an area to be welded, this is a must! 17 oz. net wt. aerosol.


    One aerosol can contains 17 oz of Undercoating Remover.

    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Non-toxic, non-corrosive, CFC-free, Biodegradable


    Shake can thoroughly before, and periodically during, use. Spray-apply to a 12" square area and allow to penetrate for 30 seconds to 2 minutes. Then scrape loosened undercoating from surface. Reapply if necessary to remove heavy applications.

    NOTE: Will remove paint! Rinse painted surfaces immediately with water to avoid damage. Do not use for removal of baked-on, epoxy or urethane coatings.

    Customers also viewed: