• Home
  • Underhood Black Matte Aerosol 11 oz

    Underhood Black Matte Aerosol 11 oz

    Item #12032Z

    Acrylic lacquer for an OEM-matching matte finish under the hood

    Details

    Underhood Matte Black is the correct shade of black, having just the right matte finish many older car manufacturers used on radiator supports, inner fenders, firewalls, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that will not hide surface details.

    More info...

    About Underhood Black Matte Aerosol 11 oz

    Underhood Matte Black is the correct shade of black, having just the right matte finish many older car manufacturers used on radiator supports, inner fenders, firewalls, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that will not hide surface details.


    Contents

    NET WEIGHT 11OZ


    Accessories

    10041z PRE Painting Prep Eastwood Chassis Black Eastwood Ceramic Engine paints Spray Gray Detail Gray Aluma Blast Carb Renew Radiator Black


    Safety

    always wear skin, eye and respiratory protection when painting do not use near an open flame. Always paint in a well ventilated area. consult MSDS for specific safety warnings and precautions.


    Warranty

    MADE IN THE USA NSN # NONE


    Application

    Use Underhood Black for the correct matte black finish used on inner fender, fire walls, brackets, and more on many cars. Underhood Black is an acrylic lacquer and withstands up to 250 degrees F. Use PRE Painting Prep (10041 Z) to remove residual grease/oil before painting. Use Self Etch Primer (16014 Z) Aerosol or (16009 ZP) Quart on clean metal surfaces. Note: Underhood Black is a Lacquer Paint. Do not use with ENAMEL primers. Use these products in a well ventilated area, or use a respirator.