- Underhood Black Semi Gloss Aerosol 11 oz
Underhood Black Semi Gloss Aerosol 11 oz
the OEM finish under the hood
Underhood Black™ is the perfect lacquer paint for the correct OEM-matching finish under the hood
- Restores OEM Low Gloss Finish
- Protects From Rust and Corrosion
- Fast Drying Formula
- Perfect for Firewalls and Inner Fenders
Underhood Black™ Semi-Gloss is just the right 10-20 percent semi-gloss finish for most radiator supports, inner fender walls, underhood brackets, and other under hood parts. The Matte formula duplicates the near-zero gloss finish you find in many older cars for those parts. Both formulas resist chipping, scratches and light impacts.11-oz. aerosol can covers 6 square feet.Customer Review: "I'm building a 1969 Yenko Camaro. I have the subframe and arms powder coated. I used Underhood Black on the engine bay and the underfloor. You cannot tell the difference between the powder coating and the Eastwood paint...amazing results! Looks factory-new now."
About Underhood Black Semi Gloss Aerosol 11 oz
Underhood Black is the correct shade of black, having just the right 10-20% semigloss finish most car manufacturers used on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250 degrees F and goes on thin for a satin smooth finish which does not hide surface details. One aerosol covers 6 square feet.
One 12 oz. aerosol can of Underhood Black covers 6 sq. ft. Max temp 250F. Lacquer. We recommend the Quart size of Underhood Black (10045 ZP) for covering up to 50 sq. ft.
Use Pre Painting Prep (10041 Z) to remove residual grease/oil before painting. Use Self Etching Primer (16014 Z) Aer or (16009 Z P) Qt on clean metal surfaces. Buy 3 or more and SAVE!
Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Use Underhood Black for the correct Satin Black finish used on inner fender, fire walls, brackets, and more on many cars. Underhood Black is an acrylic lacquer, covers 6 sq ft, and withstands up to 250 degrees F. Buy 2 or more and Save! Use PRE Painting Prep (10041 Z) to remove residual grease/oil before painting. Use Self Etch Primer (16014 Z) Aerosol or (16009 ZP) Quart on clean metal surfaces. Note: Underhood Black is a Lacquer Paint. Do not use with ENAMEL primers. Use these products in a well ventilated area, or use a respirator like our SAS Bandit Respirator (11455 or 11456).
Customers also viewed:
Durability and precision of a 2-component coating, without the paint gunOnly $22.99
Make your engine compartment look as sharp as the rest of your car
Transforms surface rust into a paintable surface!
Starting at: $17.99
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $6.99
Spray-on a protective, durable, aluminum-look finish