• Home
  • Eastwood Gray Urethane Primer and Activator Gal Kit
Eastwood Gray Urethane Primer and Activator Gal Kit is rated 4.625 out of 5 by 8.
Rated 5 out of 5 by from Drys fast and sands out easy Great to fill pin holes and put it on thick.........I used a 2.0 tip and no filter in the gun........I work all week and get so I let it get good and dry all week then hit it with 600 soft block.
Date published: 2014-10-13
Rated 5 out of 5 by from Perfect for novice painters and body workers This surfacer was a very crucial crutch and helping me get a desirable DIY paint job on my truck that anybody would be proud of. Sandability is incredible and flows out well (needs to be reduced by 10%). Filling and leveling properties really helped me correct any mistakes that I had made in my filler. Would definitely buy again.
Date published: 2014-10-23
Rated 5 out of 5 by from A NOVICE AUTO PAINTER this being my first attempt at auto painting, I chose Eastwood for their products and service help. this primer goes on very well, but needs additional reducer. Should use a 1.8 to 2.0 needle for ease of application. VERY GOOD PRODUCTS AND SERVICE
Date published: 2014-12-19
Rated 4 out of 5 by from good Putting the primer on I had to put reducer in it, cause it wasn't atomizing very well, but the next day it seem to block out pretty easy.
Date published: 2013-11-22
Rated 5 out of 5 by from Good product Quality product. Would like Eastwood to give information on how to set up a temporary paint booth for one timers or limited application.
Date published: 2014-12-27
Rated 5 out of 5 by from Another fine product Very good product. Goes on very smooth if thinned just a little. Sands easily either wet or dry. Good value.
Date published: 2013-12-05
Rated 5 out of 5 by from 1987 fhp mustang good product but need 15/% redece flow very nice send easy .i like the result. very happy .
Date published: 2015-02-17
Rated 3 out of 5 by from primer sprayed on good but is hard to sand it down to level it out
Date published: 2015-02-03
  • 2015-03-04T10:21CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_13676ZP, PRD, sort_relevancy
  • clientName_eastwood

What is the minimum temperature this can be applied?

Asked by: neal289
You should apply all paint and primer materials as close to 70 degrees as possible. You may be able to get away with application when the ambient temperature falls below 70, but you will need to extend flash and dry times to accommodate for the cooler weather. Panel temp should never be colder than ambient temperature.
Answered by: MikeL
Date published: 2014-12-07

what is the best product to thin with. 10 or 15 percent. thank you.

Asked by: ken61
  • 2015-03-04T11:41CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_13676ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Gray Urethane Primer and Activator Gal Kit

Item #13676ZP Brand: Eastwood

2-component gray surfacer designed for overall jobs

Details

Eastwood Urethane primer is a two-component gray surfacer designed for overall jobs. It fills well, sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over Eastwood Epoxy primers, old paint, body filler & even bare metal. Ideal for block sanding in 3-4 hrs after application. kit makes 5 sprayable quarts, includes medium speed activator. Primer is VOC 2.1 lbs per gallon.

More info...

About Eastwood Gray Urethane Primer and Activator Gal Kit

EW Urethane primer is a two component gray surfacer designed for overall jobs. It fills well, sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over Eastwood Epoxy primers, old paint, body filler & even bare metal. Ideal for block sanding in 3-4 hrs after application. kit makes 5 sprayable quarts, includes medium speed activator. Primer is VOC 2.1 lbs per gallon.


Contents

50240ZP 128 oz-1 gallon of Gray Primer 50241ZP 32oz-1 quart of medium speed activator


Accessories

10041 Z PRE Paint Prep 51550 Concours Paint Gun 51136 EW Color Chart 20474 EW Dry air system 12817 Paint Gun accessory kit 51559 EW Digital regulator 12846Z Aerosol Injected Cleaner 12779 Evolution Conposite Paint Gun


Product Information Sheet

Click here for product information sheet


Safety

Use in well ventilated area Always wear eye, skin and repiratory protection Consult MSDS and Product Data Sheet for specific saefty instructions


Warranty

60 days warranty


Application

Mix 4:1 with 50309ZP Urethane activator May be reduced up to 20% with eastwood's low VOC reducer Use HVLP spray gun nozzle size 1.2-1.6, conventional 1.4-1.6 HVLP Gun 8-10 psi, conventional 40-50 psi. Apply two wet coats with 10-15 minute flash time. Topcoat after 30 minutes, up to 18 hours. Primer must be abraded before topcoatong for adhesion purposes.


Customers also viewed: