• Home
  • Versa-Cut 60 and MIG 175 Heavy Metal Fab Kit

Versa-Cut 60 and MIG 175 Heavy Metal Fab Kit

Item #14289 Brand: Eastwood

Tackle heavy metal fabrication with this Plasma Cutter & Welder Combo Kit
Heavy Item-Special shipping charges may apply.

Details

Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa Cut 60 Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

Eastwood's MIG 175 Welder has "high-end" features at a DIY price! As a professional or weekend enthusiast, you can now get industrial-quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive competition!
  • Welds mild and stainless steel, 24-ga. to 5/16"
  • Welds aluminum, 14-ga. to 1/4"
  • 30-175-amp welding range
  • Includes FREE spool gun ($199.99 value!)
  • Powered by 220v current
  • Compare to similar welding machines that sell for over $700
  • ETL Approved
  • Backed by Eastwood's no-hassle return policy and 3-year warranty

The Eastwood Versa Cut 60 Plasma Cutter works with 220v input to easily slice through steel, stainless and aluminum as thin as 24-gauge or as thick as 7/8". 220-volt, 50-60Hz, 60-amp, output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010" to 0.875" with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20' torch and 10' ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.
  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Built-in pilot arc system
  • Internal moisture separator

About Versa-Cut 60 and MIG 175 Heavy Metal Fab Kit

Eastwood MIG 175with spool gun
MIG 175 welder is designed for the professional or weekend enthusiast. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. Welder has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (for welding 19-gauge to 1/4" aluminum plate), wire, tips and other welding supplies...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration.

Eastwood Versa-Cut 60 Plasma Cutter
220 volt 50 to 60Hz, 60 amp output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010 to 0.875 inch with ease. Heavy duty Mosfet inverter, Internal moisture separator, 20 foot torch and 10 foot ground cable with adjustable air pressure regulator assure long life, accurate cuts, fine metal fabrication and ease of use. Also includes self starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


Contents

14099 Eastwood Versa-Cut 60 Plasma Cutter
60 amp output,220 Volt AC input, 60 or 50Hz output. 60% duty cycle at60 amps. 40lb weight

12012 Eastwood MIG 175with spool gun
Includes Spool Gun with 9' cable (works with 2-lb. wire spools only), MIG Wire 0.030, Aluminum Wire 0.030, Gas Regulator with hose, 8' Ground Clamp, 8' Gun Cable


Accessories

Plasma Shades - Plasma Cutting Glasses

Eastwood Welding Cart

Eastwood's Plasma Cutting Guide

Welding Jacket

Large View Auto Darkening Helmet

Welding Gloves


Safety

Always wear approved eye, hand and face protection. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


Warranty

3 Year warranty against manufacturer defects.


Instructions

Click here for Eastwood MIG 175with spool gun instructions



Click here for Eastwood Versa-Cut 60 Plasma Cutter instructions


Customers also viewed: