• Home
  • MIG Welder 175 and Versa-Cut Plasma Cutter 60

    MIG Welder 175 and Versa-Cut Plasma Cutter 60

    Item #14289 Brand: Eastwood

    Tackle heavy metal fabrication with this Plasma Cutter & Welder Combo Kit

    Details

    Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa Cut 60 Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

    Eastwood's MIG 175 Welder has "high-end" features at a DIY price! As a professional or weekend enthusiast, you can now get industrial-quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive competition!
    • Welds mild and stainless steel, 24-ga. to 5/16"
    • Welds aluminum, 14-ga. to 1/4"
    • 30-175-amp welding range
    • Includes FREE spool gun ($199.99 value!)
    • Powered by 220v current
    • Compare to similar welding machines that sell for over $700
    • ETL Approved
    • Backed by Eastwood's no-hassle return policy and 3-year warranty

    The Eastwood Versa Cut 60 Plasma Cutter works with 220v input to easily slice through steel, stainless and aluminum as thin as 24-gauge or as thick as 7/8". 220-volt, 50-60Hz, 60-amp, output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010" to 0.875" with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20' torch and 10' ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.
    • 220v AC input
    • 20' torch cable; 10' ground cable with clamp
    • Rated 60-amp output
    • Built-in pilot arc system
    • Internal moisture separator

    More info...

    About MIG Welder 175 and Versa-Cut Plasma Cutter 60

    Eastwood MIG 175with spool gun
    MIG 175 welder is designed for the professional or weekend enthusiast. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. Welder has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (for welding 19-gauge to 1/4" aluminum plate), wire, tips and other welding supplies...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration.

    Eastwood Versa-Cut 60 Plasma Cutter
    220 volt 50 to 60Hz, 60 amp output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010 to 0.875 inch with ease. Heavy duty Mosfet inverter, Internal moisture separator, 20 foot torch and 10 foot ground cable with adjustable air pressure regulator assure long life, accurate cuts, fine metal fabrication and ease of use. Also includes self starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


    Contents

    14099 Eastwood Versa-Cut 60 Plasma Cutter
    60 amp output,220 Volt AC input, 60 or 50Hz output. 60% duty cycle at60 amps. 40lb weight

    12012 Eastwood MIG 175with spool gun
    Includes Spool Gun with 9' cable (works with 2-lb. wire spools only), MIG Wire 0.030, Aluminum Wire 0.030, Gas Regulator with hose, 8' Ground Clamp, 8' Gun Cable


    Accessories

    Plasma Shades - Plasma Cutting Glasses

    Eastwood Welding Cart

    Eastwood's Plasma Cutting Guide

    Welding Jacket

    Large View Auto Darkening Helmet

    Welding Gloves


    Safety

    Always wear approved eye, hand and face protection. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


    Warranty

    3 Year warranty against manufacturer defects.


    Instructions

    Click here for Eastwood MIG 175with spool gun instructions



    Click here for Eastwood Versa-Cut 60 Plasma Cutter instructions


    Customers also viewed: