• Home
  • MIG Welder 175 and Versa-Cut Plasma Cutter 60
Versa-Cut 60 and MIG 175 Heavy Metal Fab Kit is rated 4.6667 out of 5 by 24.
Rated 4 out of 5 by from Great combo! I've owned this combo for a year and a half and have been totally happy with it! I've built several projects with these machines including a 30' x 40' steel dock and they've performed very well! The only real problem I've had is the gas solenoid on the mig sticking open and customer service and the tech dept took care of it right away! I've replaced the diffuser, electrode and cut nozzle on the plasma cutter, but only because I was running it too hot. Totally my fault, not the machine. Make sure you download the available settings chart for the plasma cutter, it's pretty acurate and will save you experimenting with settings too much.
Date published: 2014-07-24
Rated 5 out of 5 by from Very satisfied with purchase. I purchased the heavy metal fab kit for restoration of some of my vintage Jeeps and autos. The MIG 175 worked perfectly right out of the box, but I had some problems with the plasma cutter not consistently igniting, I was instructed to return the item and a new one would be sent. Upon receiving the replacement, I cut carbon steel, aluminum and stainless steel with no problems. I currently own a 200 amp Lincoln gas welder and a 300 amp Lincoln stationary welder, but the wirefeed is much easier to weld thin metal with. I am very satisfied with my purchase and with the attention I received while rectifying my problem with the VersaCut 60. Excellent value for the money!
Date published: 2013-07-01
Rated 5 out of 5 by from One of the best purchases I have ever made. I have wanted a mig welder and plasma cutter for a long time, but just couldn't justify the expense for my hobby projects. I heard about Eastwood and did lot's of research. I saved about $2000 on the package deal compared to the majors. I did it on line. Arrived in 3 days in perfect condition. The welder worked great out of the box. I installed an airfilter, but didn't notice the plugs in the filter. Duh! So I burned up the first set of consumables. I got with a rep. on line chat. Figured out the problem, new consumables in 3 days. Worked perfect. Couldn't be happier.
Date published: 2013-10-15
Rated 5 out of 5 by from Amazing setup for the home shop or small Fab shop! I have owned this Combo for a little while now and must say the MIG 175 is comparable to the same size miller and hobarts I have used. It has plenty of power to do the work I have needed it for such as welding in c notches for frames, roll cage work etc. The Versa cut 60 has plenty of power and cuts like butter. I love that it has the pilot start feature and it makes starting the cut extremely easy. all of the components are of good quality and the torch on the plasma and gun on the MIG are top notch quality. Would like to have 2 drive wheels on the MIG wire feed but the 1 works just as good and hasn't slipped yet. All in all if you're thinking about making the purchase, Just do it! I have no regrets and I'm sure you will love it!
Date published: 2014-01-30
Rated 5 out of 5 by from Great features and the price is unbeatable! Bought the Mig 175 and Plasma Versa Cut 60 as a package deal a month or so ago and after finally getting my garage wired with the 220 plug, I got to use the Mig 175 last weekend. I'm a novice at welding so I had my son, who does auto body work for a living, test it out for me. He was amazed how easy it was to dial in and what a great bead he could lay down with it, having never welded with it before. He gave it two thumbs up ! Haven't used the Versa Cut 60 yet, but will post a review when I do. Thanks Eastwood for making a product that even us rookie welders and old Hot Rodders can use and afford !
Date published: 2015-02-18
Rated 5 out of 5 by from Quaity product and service I purchased the Versa-cut 60 and Mig 175 about 9 months ago, for a wood gasifier project. The Versa-cut has performed flawlessly as long as I keep the proper distance. The Mig 175 did have some issues at about 6 months. I emailed tech support and had a response back within 15 hours each time. After we isolated the problem they replace my unit without any hesitation. I would recommend these units to anyone, and want to thank Ed and Kelly for their assistance.
Date published: 2014-06-02
Rated 5 out of 5 by from Great Value I ordered the Versa-cut 60 and Mig 175 combo kit to work on shipping containers. I have only had the product for 2 weeks however it has performed every task I have asked of them. This combo kit should be in everyones shop. Makes welding and cutting much faster and easier.
Date published: 2014-06-10
Rated 5 out of 5 by from EXCELLENT PRODUCT A++ Replaced a smaller 110 v. mig unit with this, can't believe the difference. Much more adjustability and control with this unit. Did a small job with the spool gun on aluminum and was very pleased. Tried out the plasma cutter just to get the feel of it and seems to be a good product. Would recommend this combo to anyone in the market, beginner or experienced welder.
Date published: 2013-11-18
  • 2015-04-18T08:26CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_en_US, sid_14289, PRD, sort_relevancy
  • clientName_eastwood

Does your Mig 175 also take 8in 035 & 030 wire wheel Versa Plasma 60 Cutter. Also can any repair work needed be done with sending it back to Eastwood.

Asked by: td3210
Does your Mig 175 also take 8in wire spool 030 & 035, Combo Versa Plasma 60 Cutter. Also any repair work needed be done with-out sending unit back to Eastwood.
Answered by: td3210
Date published: 2015-03-03

I am planning to build a boat with 1/4 plate at on the bottom would this be a the right size to do a good job

Asked by: Pitbull1
Yes, this plasma and MIG welder will work well on that material.
Answered by: MikeL
Date published: 2015-03-16

What AMP breaker do I need for the mig 175 and plasma 60? I have a 30 AMP where I want to set up. Is that enough?

Asked by: Ken H
Yes a 30 amp breaker is all thats needed for a minimum or a 50 amp would work as well.
Answered by: SeanA
Date published: 2015-03-16

"Where" are the MIG Welder 175 and Versa-Cut Plasma Cutter 60 manufactured?

Asked by: Chris24
Our R&D team designed them here but they are manufactured overseas by our private company in china.
Answered by: SeanA
Date published: 2015-03-16

I am building a race will this welder do the job in welding up a roll cage

Asked by: sehayward
The MIG 175 will weld up to 5/16" mild steel and stainless.
Answered by: NickC
Date published: 2014-10-14

I have never mig welded at all , only some stick and not that good!! LOL  how hard is it to learn to mig for a hobbiest? I am wanting to build a BBQ  pit from a 300 gal tank made of 5/16 metal so I think the 175 mig should do it as well as the 60 plasma !

Asked by: pappywith4
The MIG 175 and Plasma 60 will handle your project's needs. MIG welding is a lot easier to pick up for most people, compared to stick welding. In an afternoon (or less), most people that have never MIG welded can get the hang of it. The settings chart on the welder makes it easy to get the machine dialed in to the metal you are working on. Be sure to check out our YouTube channel for welding and plasma cutting videos. Here is a link to a video we did with MIG welding tips and tricks. https://www.youtube.com/watch?v=jz9Qr5FeWhA
Answered by: NickC
Date published: 2015-03-16
  • 2015-04-18T09:16CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_14289, PRD, sort_recentAnswersFirst
  • clientName_eastwood

MIG Welder 175 and Versa-Cut Plasma Cutter 60

Item #14289 Brand: Eastwood

Tackle heavy metal fabrication with this Plasma Cutter & Welder Combo Kit
Heavy Item-Special shipping charges may apply.


Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa Cut 60 Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

Eastwood's MIG 175 Welder has "high-end" features at a DIY price! As a professional or weekend enthusiast, you can now get industrial-quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive competition!
  • Welds mild and stainless steel, 24-ga. to 5/16"
  • Welds aluminum, 14-ga. to 1/4"
  • 30-175-amp welding range
  • Includes FREE spool gun ($199.99 value!)
  • Powered by 220v current
  • Compare to similar welding machines that sell for over $700
  • ETL Approved
  • Backed by Eastwood's no-hassle return policy and 3-year warranty

The Eastwood Versa Cut 60 Plasma Cutter works with 220v input to easily slice through steel, stainless and aluminum as thin as 24-gauge or as thick as 7/8". 220-volt, 50-60Hz, 60-amp, output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010" to 0.875" with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20' torch and 10' ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.
  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Built-in pilot arc system
  • Internal moisture separator

More info...

About MIG Welder 175 and Versa-Cut Plasma Cutter 60

Eastwood MIG 175with spool gun
MIG 175 welder is designed for the professional or weekend enthusiast. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. Welder has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (for welding 19-gauge to 1/4" aluminum plate), wire, tips and other welding supplies...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration.

Eastwood Versa-Cut 60 Plasma Cutter
220 volt 50 to 60Hz, 60 amp output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010 to 0.875 inch with ease. Heavy duty Mosfet inverter, Internal moisture separator, 20 foot torch and 10 foot ground cable with adjustable air pressure regulator assure long life, accurate cuts, fine metal fabrication and ease of use. Also includes self starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


14099 Eastwood Versa-Cut 60 Plasma Cutter
60 amp output,220 Volt AC input, 60 or 50Hz output. 60% duty cycle at60 amps. 40lb weight

12012 Eastwood MIG 175with spool gun
Includes Spool Gun with 9' cable (works with 2-lb. wire spools only), MIG Wire 0.030, Aluminum Wire 0.030, Gas Regulator with hose, 8' Ground Clamp, 8' Gun Cable


Plasma Shades - Plasma Cutting Glasses

Eastwood Welding Cart

Eastwood's Plasma Cutting Guide

Welding Jacket

Large View Auto Darkening Helmet

Welding Gloves


Always wear approved eye, hand and face protection. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


3 Year warranty against manufacturer defects.


Click here for Eastwood MIG 175with spool gun instructions

Click here for Eastwood Versa-Cut 60 Plasma Cutter instructions

Customers also viewed: