• Home
  • Eastwood Plasma Cutter 60 Amp Versa-Cut
Eastwood Plasma Cutter 60 Amp Versa-Cut is rated 4.8611 out of 5 by 36.
Rated 5 out of 5 by from Great Home-Shop Plasma Cutter! I bought the Versa-Cut 60 based on capacity and price. This is a great Plasma cutter for the Home Shop / Hobby - Fabrication guy. I tested the machine immediately out of the box and it worked flawlessly. I have had it for 3 weeks and have used it almost daily on carbon steel, stainless and aluminum in various thickness'. I printed out the suggested settings "chart" on the Eastwood web-site and plan to laminate it & keep it on the cart. This is a Great tool!
Date published: 2014-12-23
Rated 5 out of 5 by from Cuts the thick stuff Many products overstate their abilities but I was truly able to cut 7/8" steel with this. I later sliced up a 55 gallon drum like butter. I'm impressed.
Date published: 2014-10-15
Rated 5 out of 5 by from warrentee service After about 3 months of purchasing my 60 amp Versa-Cut I heard a loud pop as I was cutting. It went dead! I called Tech. Support and was informed that the capasitor had likely failed. I was told they would have Fed Ex pick it up and they would send me a new unit. That's exactly what happened. Couldn't be happier.
Date published: 2014-02-15
Rated 4 out of 5 by from Website Needs Upgraded Product came the next day worked very well. My problem is the torch requires threaded electrodes. unfortunately, the website does not show threaded electrodes that fit my torch head. I ordered the electrodes listed on the website for Versa 60, but the ones that came did not have threads. Customer Service was very quick to replace the electrodes sent in error. I appreciated the quick service. The problem remains, the threaded electrodes needed are not listed on the website.
Date published: 2014-02-21
Rated 5 out of 5 by from Works as promised Received a day earlier then I thought it would come. Worked great to get the immediate job done cutting 1/2" plate. Then the torch died. Apparently the micro switch that controls the pilot arc broke. But Eastwood shipped a whole new torch assembly overnight. Great service. The three year warranty is one of the main reasons I settled on Eastwood. Appears to have been the right choice.
Date published: 2013-06-01
Rated 5 out of 5 by from Eastwood 60 Plasma Versa Cut My 1st plasma cutter. Important to learn how to set amp/air, the right settings eliminate blow back, completes cut on 1st pass, and makes smother cut. Thicker material require slower cutting. Cuts very good on rusty metal. I've cut 1/2 inch by following a guide with the right settings and cut looked very smooth. Easy to destroy consumables with blow back. After several replacements I now use a metal drag attachment which seems to help. Eastwood guarantee for me has been exceptional. I'm just a hobby and occasional user, but at 1/2 the price of American 40 amp plasma, it far exceeded my expectations.
Date published: 2015-03-02
Rated 5 out of 5 by from excellent product response by your company to any problem has been excellent.
Date published: 2014-05-28
Rated 5 out of 5 by from Powerful for a great price Just recently got around to using this but I used it on quarter plate and it fired the first time and cut the metal like butter.How did I live without one of these for so long?I've got a lot of projects in different stages and this will be good for everyone of them.
Date published: 2014-11-12
Rated 5 out of 5 by from love it I'm throwing away my cutting torch, my sawzaw any everything else I use to cut metal with. I feel like a surgeon when I use it.
Date published: 2013-11-20
Rated 5 out of 5 by from This is my 3rd plasma cutter and I am very pleased I have had 2 plasma cutters before this one, both more expensive but less amps around 30 amps each. One was the top brand and they did well but I wanted to cut thicker material. So I bought this one. WOW. It cuts as they say. Add a longer ground and you have everything or get the 220v extension cord. It is smooth cutting and it cuts the thick or thin stuff like I wanted. I am so glad I bought this machine.
Date published: 2014-12-27
Rated 5 out of 5 by from My christmas present to me. Didn't know anything about a plasma cutter, But I always wanted one . Knew the name Eastwood, from when I used to work on my 1940 ford. Ordered it online ,Took it out of box went to Lowe's got airline dryer,25 foot cord and plug ,50 amp breaker, started playing with it, Don't know how I got by without this all these years, Learning as I go. Would recommend this unit to anyone.
Date published: 2015-01-01
Rated 5 out of 5 by from Great over all I have now used it quite a bit and at this time no problems I am concerned due to the expense of the consumables and that the torch uses threaded electrodes I have not seen them advertised on the site however I was reading other posts and they called tech service and they got the right ones we will see over all still impressed with unit
Date published: 2014-06-24
Rated 5 out of 5 by from Awesome machine Just purchased a few weeks ago and I used it the first time yesterday. Cut thru 5/8 steel like butter. Works as good as a friends $3500 machine. Extremely happy with all of my Eastwood purchases. Great prices, courteous service, and fast shipping. What more could you ask for?
Date published: 2015-03-06
Rated 5 out of 5 by from Works Great! Set up was easy. I never used a plasma cutter previously and had no trouble with this unit. Cutting mostly 1/4" steel with no problem. It is amazing how hot the plasma is. Personal protection equipment is important. Really like this unit, it is a great addition to my shop.
Date published: 2014-11-16
Rated 5 out of 5 by from Rate this 110% This plasma cuts steel like scissors cut paper. I have been making due with my old plasma for 15 yrs. It struggles with 1/8 thick sheet metal. I am amazed with this plasma. To help others, it is designed to continue to circulate air in order to cool tip.
Date published: 2014-02-20
Rated 5 out of 5 by from Warrantee I purchased a 60 amp Versa-Cut Plasma Cutter a year ago. All of a sudden it would cut out while cutting and not ignite. I called Tech Support at Eastwood and talked to Ed. After hearing my explanation, He said he would do the paper work and have my cutter picked up by Fed-Ex and ship a new unit. Yep, it was that simple. I boxed it up and it was picked up by Fed-Ex the next day. Eight days later a new unit was delivered to my door. Absolutely the best Customer Service I have ever experienced.
Date published: 2015-04-09
Rated 5 out of 5 by from awesome! Bought this about a month ago. Right out of the box, works great! I haven't used one enough to be anything but a novice! This is the best tool I've ever bought!
Date published: 2015-01-22
Rated 5 out of 5 by from Great Cutter This a great plasma for a reasonable price! Cuts clean and fast. I Use this every day for cutting plates and cutting symbols. Works Prefect!
Date published: 2014-10-01
Rated 5 out of 5 by from Awesome machine I just cut a piece of aluminum 3/8 it looked like it had been sheared cut
Date published: 2015-04-05
Rated 4 out of 5 by from Great prducts and super service! I bought the mig 175 and plasma 60. I have a few little issues with both. Nothing major. I called tech line and talked to the guys and told them my issues. Without trying to waste much time trouble shooting unnecessary things and pinching penny's or me having to send things back and wait for what they found the problems to be and then send replacements.. They sent out a brand new spool gun and cutter torch assembly right away at no cost and did not want the old ones back I got them in 2 days! I had some intermittent issues with the plasma cutter some times it would "act up" They guys sent FedEx to pick mine up and 2 days latter I had a brand new one no hassle no "lets see if we can fix this on first. stuff" and I had it for about 6 months. For a small and I mean small sacrifice in quality from the main name brands its well worth it for the warranty and customer service of Eastwood that you would never get from the other company's. They ship very very fast and you can count on getting your products ASAP and very little down time if any! As far as performance there is nothing that comes close for the price and frankly for two or three times the money they still would be hard to beat. They weld as well if not better than any,Miller,Hobart or Lincons I have used, I am very impressed with the spool gun and aluminum welding capability's! They also will weld heavier capability than what they are rated for and weld thin metal great too!
Date published: 2015-03-23
Rated 5 out of 5 by from The replacement I bought a Plasma Cutter 60 Amp Versa- Cut and had used it for Apx 30 minutes when it burned up. Called the company and they immediately told me that they would pay for shipping it back and send me a new one upon reciept of it. they did all the work. Sent Fed X after it in 2 days and i got a replacement in a week. at no cost to me. This one is working fine and no problems. Thank You Eastwood for being so nice.
Date published: 2014-03-21
Rated 5 out of 5 by from Very Nice uint I recently purchased this unit ,and am amazed how easily it is to use right out of the box.I have cut 1/2 stock with out a problem.Amazing how it cuts thru steel.My deciding factor to purchase was the three year warranty.My only issue with this unit is,why I waited so long to purchase it.Will never go back to cutting wheels again.Excellent value for the money.Would recommend to anybody.
Date published: 2015-01-29
Rated 5 out of 5 by from Totally worth every penny! Very capable little machine for use around the house or farm for non-commercial use. I bought this to fabricate misc. parts for a custom tractor implement project. Cuts 1/2" plate easily but, like anything else, being mindful of duty cycle makes all of the difference in the world. Just exhausted first set of consumables after two months. Great little machine!
Date published: 2015-02-02
Rated 5 out of 5 by from Amazed I have only had time to play with my plazma cutter so far, and only have 1/8 to 1/2 inch thick steel for scrap. But I am totally amazed at how clean and fast it cuts. I shopped for some time before purchaseing this unit. 60amp, 20 foot lead, 60% duty cycle. I couldn't find a better price and most leads are 15 feet.
Date published: 2013-02-16
Rated 5 out of 5 by from Great product Have been doing alot of cutting around my garage/ yard here at home , mainly cleaning up old scrap steel and aluminum. Noticed a problem with the torch assembly, and one phone call later Eastwood and a new torch assembly out to me. Thanks Eastwood ....
Date published: 2013-03-24
Rated 5 out of 5 by from Don't know how I went so long without one. I have been using this to restore a 1973 Challenger that I have to replace every major body panel and floor pan. "Cuts Like Budder" and has never failed me. I would highly recommend for any garage restoration project.
Date published: 2015-01-21
Rated 5 out of 5 by from Very Pleased So Far I received my plasma cutter several weeks ago and so far I have been very happy with it .I can see there is a learning curve with plasma cutting so I should be even happier. Great company Eastwood keep it up ..
Date published: 2013-09-05
Rated 5 out of 5 by from Great product Very easy to use Good price. Fast shipping And great product
Date published: 2015-04-13
  • 2015-04-26T10:24CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_36
  • loc_en_US, sid_14099, PRD, sort_relevancy
  • clientName_eastwood

Do you sell replacement tips electrodes and swirl caps

Asked by: mike d
Yes we carry all consumables for our units. Electrodes: Item 14344
Answered by: SeanA
Date published: 2014-11-27

What is the max amp draw on this machine?

Asked by: Raco
We do not have information about the exact amperage draw at full power, but the Versa-Cut 60 plasma cutter requires a NEMA 6-50R receptacle and a 50A breaker.
Answered by: MikeL
Date published: 2015-03-01

who makes this machine? American made?

Asked by: kiim
The machines are manufactured in China by one of our established factories. We design, test, and redesign at Eastwood. We make sure all aspects of the welder are looked over and built to our specifications, which is why we are confident in offering the warranty that we offer.
Answered by: NickC
Date published: 2015-01-18

Eastwood Plasma Cutter 60 Amp Versa-Cut Item #14099 Brand: Eastwood Is air needed and how does it connect?

Asked by: stevew
A compressed air supply capable of 5-7 cfm @ 60 psi is required. The air is connected to the back of the machine. There is a photo in the instruction manual. http://www.eastwood.com/images/pdf/14099_instructions.pdf
Answered by: NickC
Date published: 2014-10-18

The small jet inside the electrode tube, plasma 60 ,where can I purchase ,do not see it on your parts list.

Asked by: craftman
  • 2015-04-26T10:15CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_14099, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Plasma Cutter 60 Amp Versa-Cut

Item #14099 Brand: Eastwood

Powerhouse slices thru 7/8" steel and aluminum. 220v only.

Details

Versa-Cut 60 Plasma Cutter easily slices through materials up to 7/8" thick. Our Eastwood-designed portable plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 7/8". Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Air flow rate: 5-7 CFM at 20-60 PSI
  • Backed by Eastwood's no-hassle 3-year warranty

Click here to see our Versa Cut 60 set-up chart

More info...

About Eastwood Plasma Cutter 60 Amp Versa-Cut

220-volt, 50 to 60Hz, 60-amp-output portable plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010- to 0.875-inch with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20-foot torch and 10-foot ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


Specifications

60-amp output, 220-volt AC input, 60 or 50Hz output. 60% duty cycle at 60 amps. 40 lbs.


Accessories & Consumables

Parts & Consumables

12814 Versa-Cut Nozzles, 10 pcs.
14344 Versa-Cut 60 Electrodes, 10 pack

Accessories

13689 Plasma Cutting Guide
13948 Plasma glasses
Cut 60 outside nozzle - 14557
Cut 60 guide - 14555
Cut 60 Torch Assembly - 14343


Instructions

Click here for product instructions


Safety

Always where eye, hand and face protection when cutting.


Warranty

3-year warranty. Made in China.


Customers also viewed: