• Home
  • Eastwood Plasma Cutter 60 Amp Versa-Cut
Eastwood Plasma Cutter 60 Amp Versa-Cut is rated 4.871 out of 5 by 31.
Rated 5 out of 5 by from Excellent Just opened up the box and wow what a difference between the E-Bay chinese units and this one the first thing i noticed was the torch was a trafimet with a real trigger not like the one i returned with a little flapper for a button, and it came with a flow guage to check the pressure coming out of the torch. The only thing i wished it had was a 20' ground cable to match the 20' torch, would make sense right. I noticed the post flow was longer than my previous unit witch i feel will extend the tip life a lot. I use this for hobby use at home and with 60 amps available it's more than enough. Will write a review after using it for more than a couple times.
Date published: 2014-06-13
Rated 5 out of 5 by from Great little machine My point of comparison is torch cutting. This is so much better. It does a pencil lead thin cut in 1/4" steel with no slag buggers on the bottom. No fuss, no muss, pretty much as fast as I can move the torch. Set up was easy. At first it didn't want to light up but I unplugged the hose and plugged it back in again and off it went. I tend to have shaky hands and the little wire guide that came with it is great for holding the tip at the right distance. I'm also learning to guide it against a piece of angle iron clamped to the piece I'm cutting. I still find it amazing that this thing can do what a torch can do with only air and electricity, and it does it so much better.
Date published: 2013-08-19
Rated 5 out of 5 by from Cuts like butter, 7/8" is not an understatement. After making the mistake of buying a $300 cheapo I was considering a pricey name brand unit. The Eastwood catalog arrived just in time with the Versa-Cut 60 at about half the price of the big guy. I read the reviews, it had a 3-year warranty, Eastwood seems respectable, I decided to try it and was not disappointed. The quality of construction seems good. It has a normal 220v 50amp plug end on it so I didn't have to add a connector. I did add an inexpensive air filter and I was cutting! It really is like magic the first time you use a plasma. I won't keep typing here because have made a video review from the standpoint of a beginner with a plasma cutter. Bottom line, good machine, good price.
Date published: 2014-10-13
Rated 5 out of 5 by from Eastwood 60 Plasma Versa Cut My 1st plasma cutter. Important to learn how to set amp/air, the right settings eliminate blow back, completes cut on 1st pass, and makes smother cut. Thicker material require slower cutting. Cuts very good on rusty metal. I've cut 1/2 inch by following a guide with the right settings and cut looked very smooth. Easy to destroy consumables with blow back. After several replacements I now use a metal drag attachment which seems to help. Eastwood guarantee for me has been exceptional. I'm just a hobby and occasional user, but at 1/2 the price of American 40 amp plasma, it far exceeded my expectations.
Date published: 2015-03-02
Rated 4 out of 5 by from This is my 3rd plasma cutter My 1st plasma cutter blew a capacitor and was replaced in a timely manner at no cost to me. The 2nd one was faulty right out of the box. It would not hold an arc. Ed in Tech diagnosed as a bad torch lead. I now have my 3rd cutter that appears to be working great. The customer service I received was outstanding with no questions asked and no cost to me. I lost some time but I guess that's life. Considering the cost savings and the customer service, I am tickled to death.
Date published: 2014-04-18
Rated 4 out of 5 by from Cuts well, easy to use I bought this because I'm restoring/rebuilding a '65 F350 with a very rusty flareside bed and I knew there was a lot of metal removal ahead of me. The unit cuts well and works well but the air pressure adjuster doesn't work and I've been unsuccessful at getting any help from Eastwood. One of the reasons I bought this over a Lincoln was the price and the fact that others had commented in reviews about how responsive Eastwood was for tech support, but this has not been my experience. As long as you can regulate your air pressure ahead of the unit its fine. Like others, mine continues to blow air after releasing the trigger, which I assume is to cool parts, not sure, minor annoyance.
Date published: 2015-01-05
Rated 4 out of 5 by from wow ok guys, i bought a plasma cutter from you maybe a year ago. it was fun playing around with it. for my birthday, my lovely wife built me a new shop. its 24x32 with 10 ft ceiling. anyway, i moved my 60 gmc truck right in and started to get serious.the bolts are very rusted, or should i say were? in less than 5 hours i had the entire bed off the truck and disassembled with very minimal damage to anything other than the bolts.family and friends couldnt believe it. thanks again for a quality time saving tool. i am saving to order again soon. andy myers timberville va
Date published: 2012-11-29
Rated 5 out of 5 by from So Far Its Amazing I have an existing thermo dynamics plasma and a acetylene torch. The thermo dynamics is a nice machine but only cuts a 1/4 inch and the acetylene is awesome but can be a pain to use in certain areas. So I wanted a larger plasma and since any name brand is 2 to 3 times the cost and still not capable of the Versa 60 I thought what the heck ill try it. I cut some 1/4 stock like nothing, then for fun grabbed an old brake rotor, rusted bad, just clamped it on turned up the juice and bam sliced it right up. Spent the next couple hours cutting material for an awesome welding cart. Clamped a straight edge on some 16 gauge and this just glided right along cutting beautiful straight lines. The long cables are great as well. Great plasma cutter!
Date published: 2015-02-26
  • 2015-03-03T10:03CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_en_US, sid_14099, PRD, sort_relevancy
  • clientName_eastwood

After reading the reviews it seems like this machine has a problem with failing diodes and Eastwood stands behind it. What about after, can you get parts for it after the 3 year warrantee is up?

Asked by: Woody 920
After the three years is up, you will still be able to get parts for that unit.
Answered by: Ed O 88
Date published: 2015-03-02

What is the duty cycle.

Asked by: Tanner
60% duty cycle at 60 amps
Answered by: NickC
Date published: 2015-02-16

Just got my Versa Cut 60. What is the tube with the metal ball used for? Measure air flow from the torch? Might be a good idea to mention it in the manual.

Asked by: Mod11
It's used in the initial factory air flow testing for the machines. It's of no use to you or me once we get the machine.
Answered by: MikeL
Date published: 2015-02-04

I am building a CNC unit. I have a Panasonic P80 Machine CNC Plasma Torch Head that has the following spec: torch may work on your machine if you have HF/HV arc start. Does the Eastwood Machine have the HF/HV arc start?

Asked by: Poco
It does have an arc start BUT we do not recommend use on a CNC machine. Being MOSFET, the transistors in the unit may/will have an issue with the servo's for the machine.
Answered by: SeanA
Date published: 2014-12-27

Does it come with air filter/regulator? If not, do you sell one and the model number?

Asked by: Thecarmonkey
It has a small internal moisture catch, but does not come with one. I would recommend getting a QC3 51566
Answered by: SeanA
Date published: 2015-03-01

Can you use a 40 amp outlet to run the versa cut 60

Asked by: joe31
We recommend a 50amp minimum and the overall 60amp as a guaranteed amp outlet
Answered by: SeanA
Date published: 2015-03-01

Do you sell replacement tips electrodes and swirl caps

Asked by: mike d
Yes we carry all consumables for our units. Electrodes: Item 14344
Answered by: SeanA
Date published: 2014-11-27

What is the max amp draw on this machine?

Asked by: Raco
We do not have information about the exact amperage draw at full power, but the Versa-Cut 60 plasma cutter requires a NEMA 6-50R receptacle and a 50A breaker.
Answered by: MikeL
Date published: 2015-03-01
  • 2015-03-03T09:36CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_14099, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Plasma Cutter 60 Amp Versa-Cut

Item #14099 Brand: Eastwood

Powerhouse slices thru 7/8" steel and aluminum. 220v only.
Heavy Item - Special shipping charges may apply.

Details

Versa-Cut 60 Plasma Cutter easily slices through materials up to 7/8" thick. Our Eastwood-designed portable plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 7/8". Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Air flow rate: 5-7 CFM at 20-60 PSI
  • Backed by Eastwood's no-hassle 3-year warranty

Click here to see our Versa Cut 60 set-up chart

More info...

About Eastwood Plasma Cutter 60 Amp Versa-Cut

220-volt, 50 to 60Hz, 60-amp-output portable plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010- to 0.875-inch with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20-foot torch and 10-foot ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


Specifications

60-amp output, 220-volt AC input, 60 or 50Hz output. 60% duty cycle at 60 amps. 40 lbs.


Accessories & Consumables

Parts & Consumables

12814 Versa-Cut Nozzles, 10 pcs.
14344 Versa-Cut 60 Electrodes, 10 pack

Accessories

13689 Plasma Cutting Guide
13948 Plasma glasses
Cut 60 outside nozzle - 14557
Cut 60 guide - 14555
Cut 60 Torch Assembly - 14343


Instructions

Click here for product instructions


Safety

Always where eye, hand and face protection when cutting.


Warranty

3-year warranty. Made in China.


Customers also viewed: