• Home
  • Eastwood Plasma Cutter 60 Amp Versa-Cut
Eastwood Plasma Cutter 60 Amp Versa-Cut is rated 4.8421 out of 5 by 19.
Rated 5 out of 5 by from Excellent Just opened up the box and wow what a difference between the E-Bay chinese units and this one the first thing i noticed was the torch was a trafimet with a real trigger not like the one i returned with a little flapper for a button, and it came with a flow guage to check the pressure coming out of the torch. The only thing i wished it had was a 20' ground cable to match the 20' torch, would make sense right. I noticed the post flow was longer than my previous unit witch i feel will extend the tip life a lot. I use this for hobby use at home and with 60 amps available it's more than enough. Will write a review after using it for more than a couple times.
Date published: 2014-06-13
Rated 5 out of 5 by from Great little machine My point of comparison is torch cutting. This is so much better. It does a pencil lead thin cut in 1/4" steel with no slag buggers on the bottom. No fuss, no muss, pretty much as fast as I can move the torch. Set up was easy. At first it didn't want to light up but I unplugged the hose and plugged it back in again and off it went. I tend to have shaky hands and the little wire guide that came with it is great for holding the tip at the right distance. I'm also learning to guide it against a piece of angle iron clamped to the piece I'm cutting. I still find it amazing that this thing can do what a torch can do with only air and electricity, and it does it so much better.
Date published: 2013-08-19
Rated 4 out of 5 by from wow ok guys, i bought a plasma cutter from you maybe a year ago. it was fun playing around with it. for my birthday, my lovely wife built me a new shop. its 24x32 with 10 ft ceiling. anyway, i moved my 60 gmc truck right in and started to get serious.the bolts are very rusted, or should i say were? in less than 5 hours i had the entire bed off the truck and disassembled with very minimal damage to anything other than the bolts.family and friends couldnt believe it. thanks again for a quality time saving tool. i am saving to order again soon. andy myers timberville va
Date published: 2012-11-29
Rated 4 out of 5 by from This is my 3rd plasma cutter My 1st plasma cutter blew a capacitor and was replaced in a timely manner at no cost to me. The 2nd one was faulty right out of the box. It would not hold an arc. Ed in Tech diagnosed as a bad torch lead. I now have my 3rd cutter that appears to be working great. The customer service I received was outstanding with no questions asked and no cost to me. I lost some time but I guess that's life. Considering the cost savings and the customer service, I am tickled to death.
Date published: 2014-04-18
Rated 5 out of 5 by from ADIOS CUT OFF WHEEL!!!!! This is my very first cut off wheel. Im a garage fabricator, for fun, and tired of the cut off wheel and trying to get fast cuts. Measure, use a guide, like an angle ruler, and watch it melt away like butter! SUPER IMPRESSED! SUPER EXCITED! And the 3 year warranty makes it all worth while. I had a Millermatic 211, sold for $930, picked up a combo deal on ebay, Versa 60 & MIG 175, for $1100 from Eastwood. Couldnt be happier!!!!
Date published: 2014-07-01
Rated 5 out of 5 by from Works as promised Received a day earlier then I thought it would come. Worked great to get the immediate job done cutting 1/2" plate. Then the torch died. Apparently the micro switch that controls the pilot arc broke. But Eastwood shipped a whole new torch assembly overnight. Great service. The three year warranty is one of the main reasons I settled on Eastwood. Appears to have been the right choice.
Date published: 2013-06-01
Rated 5 out of 5 by from excellent product response by your company to any problem has been excellent.
Date published: 2014-05-28
Rated 4 out of 5 by from Website Needs Upgraded Product came the next day worked very well. My problem is the torch requires threaded electrodes. unfortunately, the website does not show threaded electrodes that fit my torch head. I ordered the electrodes listed on the website for Versa 60, but the ones that came did not have threads. Customer Service was very quick to replace the electrodes sent in error. I appreciated the quick service. The problem remains, the threaded electrodes needed are not listed on the website.
Date published: 2014-02-21

Does it come with air filter/regulator? If not, do you sell one and the model number?

Asked by: Thecarmonkey
It has a small internal moisture catch, but does not come with one. I would recommend getting a QC3 51566
Answered by: SeanA
Date published: 2014-11-14

Can you use a 40 amp outlet to run the versa cut 60

Asked by: joe31
We recommend a 50amp minimum and the overall 60amp as a guaranteed amp outlet
Answered by: SeanA
Date published: 2014-11-05

Do you sell replacement tips electrodes and swirl caps

Asked by: mike d
Yes we carry all consumables for our units. Electrodes: Item 14344
Answered by: SeanA
Date published: 2014-11-05

What is the max amp draw on this machine?

Asked by: Raco
We do not have information about the exact amperage draw at full power, but the Versa-Cut 60 plasma cutter requires a NEMA 6-50R receptacle and a 50A breaker.
Answered by: MikeL
Date published: 2014-11-25

who makes this machine? American made?

Asked by: kiim
The machines are manufactured in China by one of our established factories. We design, test, and redesign at Eastwood. We make sure all aspects of the welder are looked over and built to our specifications, which is why we are confident in offering the warranty that we offer.
Answered by: NickC
Date published: 2014-11-25

Eastwood Plasma Cutter 60 Amp Versa-Cut Item #14099 Brand: Eastwood Is air needed and how does it connect?

Asked by: stevew
A compressed air supply capable of 5-7 cfm @ 60 psi is required. The air is connected to the back of the machine. There is a photo in the instruction manual. http://www.eastwood.com/images/pdf/14099_instructions.pdf
Answered by: NickC
Date published: 2014-10-18

Eastwood Plasma Cutter 60 Amp Versa-Cut. Can you tell me the Duty Cycle at 60 amp cut ?

Asked by: dixi

Eastwood Plasma Cutter 60 Amp Versa-Cut

Item #14099 Brand: Eastwood

Powerhouse slices thru 7/8" steel and aluminum. 220v only.

Details

Versa-Cut 60 Plasma Cutter easily slices through materials up to 7/8" thick. Our Eastwood-designed portable plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 7/8". Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Air flow rate: 5-7 CFM at 20-60 PSI
  • Backed by Eastwood's no-hassle 3-year warranty

Click here to see our Versa Cut 60 set-up chart

More info...

About Eastwood Plasma Cutter 60 Amp Versa-Cut

220-volt, 50 to 60Hz, 60-amp-output portable plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010- to 0.875-inch with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20-foot torch and 10-foot ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


Specifications

60-amp output, 220-volt AC input, 60 or 50Hz output. 60% duty cycle at 60 amps. 40 lbs.


Accessories & Consumables

Parts & Consumables

12814 Versa-Cut Nozzles, 10 pcs.
14344 Versa-Cut 60 Electrodes, 10 pack

Accessories

13689 Plasma Cutting Guide
13948 Plasma glasses
Cut 60 outside nozzle - 14557
Cut 60 guide - 14555
Cut 60 Torch Assembly - 14343


Instructions

Click here for product instructions


Safety

Always where eye, hand and face protection when cutting.


Warranty

3-year warranty. Made in China.


Customers also viewed: