• Home
  • VHT High Temp Aerosol Flat Black
VHT High Temp Aerosol Flat Black is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from EASY APPLICATION GREAT LOOK First time user, I followed directions and the end result is fantastic!
Date published: 2015-03-10
  • y_2017, m_8, d_18, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_13813Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Would this work well for a stainless steel, turbo exhaust manifold?

Asked by: Karemiah1
This product would work fine as long as you thoroughly scuff the metal to get mechanical bond and you also observe the maximum temperature this product is rated too.
Answered by: S Church
Date published: 2017-05-26

I have a batch oven for powder coating projects. It's very well ventilated. For how long should I cure this ceramic paint for? 

Asked by: ImerV
For off vehicle application: - Paint must be completely dry before curing - Heat to 250 F for 30 minutes - Cool for 30 minutes - Heat to 400 F for 30 minutes - Cool for 30 minutes - Heat to 650 F for 30 minutes
Answered by: KHoffnagle
Date published: 2017-05-05

How long to bake in oven and I guess  at 500 degrees going to try motorcycle drag pipes

Asked by: Bozo
It is not recommended to cure this product in an oven indoors due to the fumes released while curing.
Answered by: S Church
Date published: 2016-07-19

I have rusty exhaust pipes I want to paint black, is this the only Spray I need to make them look good?

Asked by: Dustydan92
Once you remove the rust this will be the perfect paint to make them look new again.
Answered by: S Church
Date published: 2016-07-06

Can I spry this over anodized aluminum that is partially bare and the anodize is still good on portions of the aluminum.

Asked by: Soup
As long as the surface is properly scuffed and cleaned it should be fine to apply over bare and anodized aluminum.
Answered by: S Church
Date published: 2017-02-15

Can I use this product on Chrome exhaust tips without a primer? Should I sand the chrome tips first?

Asked by: Victory Owner
This can be applied DTM (direct to metal) as long as the surface is properly cleaned & de-greased. There is no need for a primer or sanding.
Answered by: KHoffnagle
Date published: 2017-04-15

two questions:  1.Do you ship to Qatar?  2.can i use it for Harley motorbike exhaust?

Asked by: mohammad salari
You can use this on your exhaust, yes..
Answered by: KHoffnagle
Date published: 2016-03-31

Can this paint be used to paint an aluminium radiator and does it need a prep if so? RJM

Asked by: bomar
The material can be applied to aluminum, but it should not be used on the radiator fins themselves. It could potentially prevent the fins from dissipating heat correctly. For a better result, use our radiator black. http://www.eastwood.com/eastwood-radiator-black-paint.html
Answered by: MikeL
Date published: 2016-01-15
  • y_2017, m_8, d_18, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_13813Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

VHT High Temp Aerosol Flat Black

Item #13813Z Brand: VHT

Withstands up to 2000°F for exhausts,
headers, engine components

In stock

Only $10.99
VHT's Flameproof coatings will renew and extend the life of any surface exposed to high temperatures. This coating is a matte/flat finish, with a silicone base. Coating withstand temperatures up to 2000-ÝF Ideal for exhaust systems, headers and engine components. Flameproof coatings cure on the vehicle while in service. See applications tab for curing instructions. 11oz Aerosol

Details

VHT's Flameproof coatings will renew and extend the life of any surface exposed to high temperatures. This coating is a matte/flat finish,with a silicone base. Coating withstand temperatures up to 2000°F Ideal for exhaust systems, headers and engine components. Flameproof coatings cure on the vehicle while in service. See applications tab for curing instructions. 11oz Aerosol

More info...

About VHT High Temp Aerosol Flat Black

VHT's Flameproof coatings will renew and extend the life of any surface exposed to high temperatures. This coating is a matte/flat finish, with a silicone base. Coating withstand temperatures up to 2000°F Ideal for exhaust systems, headers and engine components. Flameproof coatings cure on the vehicle while in service. See applications tab for curing instructions. 11oz Aerosol


Contents

11oz net weight aerosol


Accessories

10041z or 11949z PRE Painting Pep 12196z Chassis Kleen 11756z Brake Gray 11175z or 11172z Extreme Chassis Black 10024z Underhood Black 12461 Pig Mats 12032z Underhood Black Matte Finish 10032z Spray Gray


Safety

Always wear eye, skin and respiratory protection. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety precautions.


Warranty

Made in USA. 60 day Mgf'er defect warranty. 2 year shelf life


Application

To apply on vehicle. Ensure surface is clean and free of greases and oils. Paint must be air dried before putting on vehicle. Run at idle for 10 minutes. Cool for 20 minutes. Run at idle for 20 minutes, let cool for 20 minutes. Run at normal operating temperature for 30 minuets, let cool for 30 minutes. Consult can label for specific curing procedures. DO NOT EXCEED TEMPERATURE OF THE LEAST HEAT TOLERANT COMPONENT OR BASE METAL.


Customer Reviews

Questions & Answers

Customers also viewed: