- Waterborne Paint Dryer
Waterborne Paint Dryer
Item #21148 Brand: Eastwood
About Waterborne Paint Dryer
Today's waterborne paints don't dry as quickly as solvent based finishes. Complete drying is essential between coats and before the clear coat goes on. this unique Waterborne Hand Held Paint Dryer Gun multiples the air volume from your compressor by up to 7 times, to produce an adjustable high volume of air flow to speed complete drying of waterborne finishes. requires 11 cfm @ 30-60 psi. gun features adjustable air flow and replaceable intake debris screen. Wide areas can be dried with additional guns. Includes on/off valve and male coupler connector.
Ensure work area is clean and free of debris. Make sure the air going into the dryer is clean, dry and cool. Hold about 18-24" from surface to be dried. Waterborne paint needs air movement to dry, move the dryer around the area to be dried. Excess air pressure could disturb the wet paint causing runs and sags. To ensure dry air, install last chance filters (34146) after your desiccant system and right at the dryer.
10041Z Prep Painting Prep, 13520ZP Contour Premium Body Filler
12776 Evolution HVLP Paint Gun
51550 Contour HVLP Paint Gun
14047 Devilbiss Gunner Cups
20473 2 stage dry air system
34146 Last Chance desiccant Filters
51559 digital regulator
20403-20406 painters coveralls
Always wear eye, skin and respiratory protection when painting. Apply paints and chemicals in a well ventilated area away from open flame.
Imported. 90 Day Warranty
Customers also viewed:
2-stage filtration removes particles down to 70 microns
Starting at: $20.49
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $7.99
Digital accuracy for Concours and HotCoat guns; measures to 160 psiOnly $24.99
Holds one 18"-wide roll of masking paper; also works as a step stoolOnly $39.99
Flame legend Mickey Harris' masking paper makes customizing easierOnly $29.99