• Home
  • Eastwood Zinc-Rich Galvanize Aerosol 13 oz

    Eastwood Zinc-Rich Galvanize Aerosol 13 oz

    Item #13242Z Brand: Eastwood

    Protects steel, ferrous metals exposed to severe corrosive environments

    Details

    • Prevents Corrosion in Extreme Environments
    • Fuses Zinc to Metal Surfaces
    • Provides Long-Term Galvanic Protection

    Eastwood's Rich Zinc Galvanize is a fast drying coating that protects steel and ferrous metals exposed to severe corrosive environments. This high performance compound fuses zinc to the metal substrate and provides long-term galvanic protection against corrosion equal to Hot Dip Galvanizing. The finished film contains 95% Zinc that protects the surface, even when penetrated or scratched, as an insoluble Zinc Oxide coating that forms over surface.

    About Eastwood Zinc-Rich Galvanize Aerosol 13 oz

    Eastwood's Rich Zinc Galvanize is a fast drying coating that protects steel and ferrous metals exposed to severe corrosive environments. This high performance compound fuses zinc to the metal substrate and provides long-term galvanic protection against corrosion equal to Hot Dip Galvanizing. The finished film contains 95% Zinc that protects the surface, even when penetrated or scratched, as an insoluble Zinc Oxide coating that forms over surface.


    Contents

    13 oz Aerosol


    Application

    For best results, use Eastwood's PRE Painting Prep to clean surface prior to application. Apply aerosol 8-10" from surface in light coats until surface is completely covered. If apply by brush, apply light coats until entire surface is covered, several coats may be required. This coating is a sacrificial paint, meaning it may require periodic applications to prevent corrosion from accumulating.


    Safety

    always wear eye, skin and respiratory protection never use near an open flame. Always apply in a well ventilated area. consult MSDS for specific warnings and precautions


    Warranty

    made in Canada 365 day warranty NSN # None


    Application

    For best results, use Eastwood's PRE Painting Prep to clean surface prior to application. Apply aerosol 8-10" from surface in light coats until surface is completely covered. If apply by brush, apply light coats until entire surface is covered, several caots may be required. This coating is a sacrifical paint, meaning it may require periodic applications to prevent corrosion from accumulating.


    Customers also viewed: