• Home
  • 2 pc 3/16in Double Ended Drill Bit
2 pc 3/16in Double Ended Drill Bit is rated 4.1 out of 5 by 68.
Rated 2 out of 5 by from Would not recommend So I took my nozzle off and the Spot Weld Nozzle went on smooth. Problem was that it kept going. Since it never got snug, I decided to take it off. The nozzle came off, but the core with the threads stayed on my welder. Not sure what to do with it since I can't weld the core in place and nothing comes to mind of some sort of an epoxy that can handle the temperature the nozzle reaches. If you are able to weld, you shouldn't waste your money. I just thought it would be convenient and may even put down a slightly cleaner weld for a less grinding on bigger jobs where I have a couple dozen or so welds.
Date published: 2012-06-29
Rated 5 out of 5 by from good I put this to the test, it works very good under perfect condition, clean medal, good ground, Lincoln 180 220v, the medal has to have a tight fit, meaning clamped together, it is not forgiving will not weld the slightest gap they recommend a set of pliers for spot welding, but in the real world we are not always welding an inch wide strip of medal and for us body guys never, however I did punch holes in a piece and use it as a plug weld and it did very well,, would I recommend this product, YES, it does what it says it will do, we’ll see more when I’m tryin to spot weld my floor broads in, I’m giving this a B+ so far
Date published: 2016-01-07
Rated 5 out of 5 by from This works very well This kit allows you to run a very consistent set of plug welds. I would essentially set the welder up for your metal, then line up the tip, and pull the trigger for about a the count of three. Nice clean welds with good penetration.
Date published: 2013-08-24
  • y_2018, m_2, d_18, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_68
  • loc_en_US, sid_13485, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Will this work on a weldmark 25-140 mig welder

Asked by: sleepy
These will fit welding machines that utilize a Tweco Classic #1 torch. with a 21 series nozzle.
Answered by: Scott C
Date published: 2018-01-11

I have a Millermatic 211 MIG welder. I would like to buy/use the Eastwood Spotweld kit, but from what I can gather, my Miller MIG gun does not seem to use a Tweco style nozzle. If I am correct, is there a Tweco adapter available for my Millermatic 211?

Asked by: TheDogFather
We do not know of any adapters at this time. If you have a push on style nozzle our spot weld nozzle part number 20427 may work for your welder.
Answered by: Scott C
Date published: 2017-10-26

I have a Hobart 140 - will the spot weld tip fit? It indicates it fits all machines with a Tweco style torch

Asked by: Dart Man 61
No it will NOT fit a Hobart Handler 140. The Hobart uses a Hobart H100 series gun which isn't compatible with a Tweco. Hobart is a slip on nozzle, where a Tweco is a screw on.
Answered by: Rocketj345
Date published: 2017-10-16

Hi I have the older Lincoln weldpak 100 mig welder, will this work for me, I do not know how to tell if it is a tweco style torch head? Thank you for your time

Asked by: ronjw114
You will need a tweco 21 series nozzle for this to fit on your torch.
Answered by: SWhitehurst
Date published: 2017-08-20

Is tweco style 21 screw on, or slip on?

Asked by: Billsranger000
This is a Tweco Style 21 screw on.
Answered by: S Church
Date published: 2017-08-14

Will this work with flux core wire as well?

Asked by: Guardm
It works great, but experiment with duration of burn! Too bad I figured this out after I purchased a MIG to deal with the heat issue, though the MIG allows a variable range of power choice.
Answered by: mrrick
Date published: 2017-08-06

When using the spot weld nozzle with the eastwood 135 mig, welding 16ga. , what power, gas, and wire speed settings would be best?

Asked by: Smokeatr23
It would be best to start with the settings for the machine and then tweak to how you weld.
Answered by: S Church
Date published: 2017-08-14

Does this nozzle fit the tweco fusion 180 might gun. Hot max nozzle does not fit.

Asked by: Ga49945
We have never tested with that exact torch. We do know it fits most thread on Tweco style torches.
Answered by: S Church
Date published: 2017-08-03
  • y_2018, m_2, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_13485, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

2 pc 3/16in Double Ended Drill Bit

Item #13485 Brand: Eastwood

Perfect for using when plug welding 20-ga. sheet metal

In stock

Only $7.99

Details

This pack includes 2 double-ended 3/16" high-speed steel drill bits with 135° cutting angle. 2.25" long. These are perfect for use when plug welding 20-ga. sheet metal.

More info...

About 2 pc 3/16in Double Ended Drill Bit

This pack includes 2 double-ended 3/16" high-speed steel drill bits with 135° cutting angle. 2.25" long. These are perfect for use when plug welding 20-ga. sheet metal.


Contents

2 Double-Ended 3/16" Drill Bits


Application

Use for drilling in sheet metal when doing plug welds for patch panels.


Safety

Always wear eye, hand, and body protection when using a drill bit. Do not exert excessive pressure when drilling as it could cause a high-speed fracture.


Customer Reviews

Questions & Answers