• Home
  • Eastwood 20 Gallon Parts Washer
Eastwood 20 Gallon Parts Washer is rated 4.4 out of 5 by 20.
Rated 5 out of 5 by from Great little washer I’ll try to keep this short because I could go long. Order process went well arrived on time and in good shape. Could have bought this washer several places for cheaper but wanted the blue and was not disappointed, powder coating actually looks thicker than some of the others I’ve seen, too much red in my garage with tool boxes already so the blue works for me. I didn’t even put it together before I modified it so Eastwood my not like this review but it has nothing to do with the unit, the washer is fine if you plan to use as manufactured but I plan to use real solvent in mine which means the pump has to go as it’s water base cleaners only. I won’t go into specifics but I replaced the pump with a petroleum safe one as well as installed an external filter setup with ball valve to adjust the flow. Since I had the fluid flowing externally I plumbed the nozzle back in at the rear of the unit pointing toward the front. Makes it easier to close the lid. I also replaced the drain plug with an engine drain valve I found online. Yeah I modified mine but the truth is I started with a descent unit so yes I would definitely recommend this washer.
Date published: 2018-03-28
Rated 5 out of 5 by from EXCELLENT PRODUCT Solid construction, metal of good size, excellent design and quality of the painting. In addition to the comment of drainage, in my case, the flexible gooseneck tube is very rigid at the plastic pump connection zone, so I had to place a clamp against the housing of the pump to avoid the plastic connection break.
Date published: 2017-12-31
Rated 5 out of 5 by from Great washer I bought this online, and it arrived in just a few days and in great condition. It works just as it should and is a sturdy piece. The only things I would change would be to add a light and rollers so that it can be moved easily in my smallish shop.
Date published: 2017-08-24
  • y_2018, m_4, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_14293, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Does your recommended cleaning fluid impact plastic, delving or other composit materials?  How well does it dissolve salt buildup?

Asked by: Chris
We have only tested the Oil Eater cleaner on greasy metal automotive parts and would not be able to say what would happen to the substrates you have referred to. With that said though Oil Eater is a safer, non toxic, water based solution.
Answered by: Scott C
Date published: 2018-04-09

What size thread is on the drain?

Asked by: Sean
The thread on this drain is 14mm x 1.5
Answered by: Scott C
Date published: 2018-02-12

Since this is a water based cleaning solution does it need to be in a heated shop/space to prevent the solution from freezing and breaking the pump/lines 

Asked by: Dave Simba
This product should be kept above freezing at all times.
Answered by: Scott C
Date published: 2018-02-01

Can you drain this from a drain plug when it needs to be cleaned?

Asked by: power wagon 74
This certainly does have a drain plug to make draining much easier.
Answered by: Scott C
Date published: 2018-01-04

Does this work cleaning paint of of parts? Will the buildup of paint over time ruin the pump? I need to clean only a few small parts, but very frequently so how often would I need to dump the water or settle as I never have even a half a day of down time.

Asked by: Nick1234
This is strictly designed to run degreaser for cleaning parts and not paint removal.
Answered by: Scott C
Date published: 2017-12-29

Can i leave the water and oil eater/degreaser in for a few days or do i need to drain after every use?

Asked by: Cory88
With the lid shut you can certainly leave the degreaser in for a while without the need to drain each time.
Answered by: Scott C
Date published: 2017-10-31

Is there a heating element to heat the water? And is this compatible with other flow through brushes

Asked by: Cory88
There is no heating element in this unit and we have never tested with other brand brushes.
Answered by: Scott C
Date published: 2017-10-31

Is this a solvent compatible pump?

Asked by: Dipstick
We do not have any solvent compatible pumps at this time.
Answered by: S Church
Date published: 2018-01-21
  • y_2018, m_4, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_14293, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood 20 Gallon Parts Washer

Item #14293

Includes parts bin and flow-thru cleaning brush

In stock

Only $139.99

Sale $125.97

 

Details

Eastwood 20 Gallon Parts Washer with Pump and Accessories won't clean-out your wallet, but does a great job on parts!

  • Rugged welded steel construction
  • Removable work shelf
  • 20-gal. tank capacity; 12-gal. cleaning solution capacity
  • Includes parts bin and flow-through brush

A must-have for any shop and DIY-priced, so you'll have one handy location for dissolving grease, dirt and debris off heavily used parts, without making a mess of your shop (or your bank account). Pump circulates your non-corrosive, water-based cleaning solution at 1 gallon per minute.

Rugged welded steel parts washer features a large removable component shelf plus small removable parts basket. Ideal for cleaning small or large parts. Flexible nozzle lets user spray fluid on work piece. The included flow through brush is perfect for removing tough grease and dirt off the part. Fusible link automatically closes lid in case of fire. Tank capacity is 20 gallons with solvent capacity of 12 gallons. Tank has drain hole with plug. Lower shelf can hold tools and other must have items.


More info...

Contents

Parts washer unit, Aqueous pump, Flow through brush, Large removable work shelf, Small Parts Basket.


Specifications

Overall Dimensions: 30"x21"x34.5" tall
Tank Size: 28"x18"x8" deep
Tub Capacity: 20 Gallon
Tub Operating Capacity: 12 Gallon
Input Power Requirements: 110-120vAC, 60 Hz, 10-amp circuit
Power Cord Length: 6' grounded


Instructions

Click here for product instructions


Safety

Do not use solvent based or flammable cleaning agents in this parts washer. The recirculating pump is designed to operate with water-based cleaning agents only. Solvents will destroy the pump and could present a fire hazard.

Always wear chemical resistant gloves and adequate eye protection.

Click here to see safety products


Warranty

1 year limited warranty


Product Video


Customer Reviews

Questions & Answers

Customers also viewed: