Item # 14792Z BRAND: Eastwood

Eastwood 2K Aerospray Matte Clear - Aerosol - 11.8oz

2K Aerospray™ Matte Clear
2K Aerospray™ Matte Clear
Eastwood 2K Aerospray Matte Clear - Aerosol - 11.8oz is rated 4.4 out of 5 by 108.
  • y_2021, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasreviews, tv_3, tr_105
  • loc_en_US, sid_14792Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 13.93ms
  • REVIEWS, PRODUCT
$27.99
Loading...
Save for Later
2K Aerospray™ Matte Clear
  • 90-Day Returns
  • Technical Support
Eastwood 2K Aerospray Matte Clear - Aerosol - 11.8oz

Description

Eastwood 2K Matte Clear Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.

  • 2-Component Catalyzed Technology
  • Two Chamber Design Aerosol
  • Most Durable Aerosol Epoxy Primer Available
  • Sprays Like a Paint Gun

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

Warranty

Made in Germany. Shelf Life is 3 Years.

Contents

11.8 ounces net weight

Accessories

10041Z PRE Painting Prep.
12196Z Chassis Kleen,
14149Z 2K Epoxy Primer.
16060Z Rust Encapsulator.
51483Z Rust Converter.
12846Z Aerosol Injected Cleaner.
11456 Respirator

Application Tips

Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life 48 hours at 68 degrees.

Safety Information

Always wear eye, skin and respiratory protection when using this product.Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings

Customer Reviews

Rated 5 out of 5 by from Rock hard surface Used the 2k gloss clear on my. Classic car interior garnish trims. Do the typical prep and paint. Then crack the 2k and spray a few coats. I didn't wet sand after but didn't need to. The finish was like glass. Rock hard too.
Date published: 2021-08-07
Rated 5 out of 5 by from Eastwood 2K Aerosol High Gloss Clear Vs Professional Spray Gun This is a really good product for small repairs, the results are equal to what what I would typically get with my devilbiss gti pro lite gun but with a lot less hassle.
Date published: 2021-07-28
Rated 5 out of 5 by from Good Stuff This two-part matt clear works well. Just follow the instructions!
Date published: 2021-07-28
Rated 5 out of 5 by from Impressed I was impressed. It worked great for a pair of headlights.
Date published: 2021-07-27
Rated 5 out of 5 by from Great Clear Coat Great product! Went on well and no gun clean up when finished. Make sure you need all the product because it does not have much shelf life after mixing.
Date published: 2021-06-30
Rated 5 out of 5 by from 2k today I was introduced to 2K back in the mid 2000's at Laconia Bike week .It was then when I airbrushed the blue fire and flames on Ricks tourng Helicopter which gave rides for the bike event..Awesome convenience and quality in a can no less. just want to say thankyou Eastwood
Date published: 2021-06-29
Rated 5 out of 5 by from 2K Aerosol High Gloss Works Worked great over Alumina. Blow out the valve after each coat so the next coat doesn't sputter. You blow it out by inverting the can and spraying until paint doesn't come out.
Date published: 2021-06-05
Rated 5 out of 5 by from Great Product The product was as described. Great matte finish which matched the factory matte finish unbleivably. The tip delivers an even spray allowing easy application.
Date published: 2021-06-01
Rated 5 out of 5 by from 2K Matte Clear Over 2K Rat Rod Matte The 2K paint worked great with the 2K matte black topcoat. One caveat, however, If you're using the same can for two different coats, with a 30 minute break, blow out the valve after the first coat so the second coat doesn't sputter. You blow it out by inverting the can and spraying until paint doesn't come out.
Date published: 2021-05-29
Rated 5 out of 5 by from worked perfectly Exactly what I needed, great flow, loved the gun-like spray. I read, re-read and re-read the can a couple times and checked the website to make sure I was doing everything right. Great product, will buy again.
Date published: 2021-05-04
Rated 5 out of 5 by from 2K clear coat aerosol cans this 2K clear is the best I tried spraymax which is a good product , but it leaves a lot of orange peel. Eastwood seems not to leave to much orange peel , .. it's fantastic...
Date published: 2019-09-06
Rated 5 out of 5 by from 2k clear coat in spray can excellant clear coat ! I think the 2k arosol does a better job than using air gun!
Date published: 2019-05-11
Rated 5 out of 5 by from 2K clear coat aerosol cans Man , this is the best 2K clear in a can by far ,it not five stars its ten stars an some.. hardly leaves any over spray .Great product..
Date published: 2019-04-05
Rated 5 out of 5 by from Love the matte clear coat! I am reviewing the matte clear coat finish. I had some flaws (deep sanding marks in my primer that I was unable to remove. I had issues with the paint dripping on my motorcycle fuel tank (first time to use HVLP, but adjusted the gun setting and the rear fender was painted flawlessly) and decided to run a stripe of the matte on a scratched area of my tank after seeing how the clear coat had hidden under seat scratches on the fender. It completely hid those scratches! I love how well this product works, and how nice the clear coat looks after being applied! I will definitely be buying more for future projects!
Date published: 2019-03-25
Rated 5 out of 5 by from Better than expected 2K clear coat. I take old guitars and give them new live and your 2K clear coat gives a deep/hard mirror like finish, really brings out the color of the paint. Very easy to use.
Date published: 2019-02-21
Rated 5 out of 5 by from Great Product. Highly recommended I normally don't write reviews, but I was blown away by this product. Normally it's all marketing, but this really does spray like a gun. It's worth the price. Leave a high gloss shine that looks like it's from a gun.
Date published: 2019-01-29
Rated 5 out of 5 by from Amazing Product Love this product and the shipping was REALLY FAST!! Will never buy from anyone else from now on.
Date published: 2019-01-24
Rated 5 out of 5 by from Good duplicolor overcoat I bought this specifically to over coat the duplicolor paint on my motorcycle gas tank. I used this with no signs of damage to the bottombase coat or lacquer matte previously painted. Very pleased with coverage and durability.
Date published: 2019-01-18
Rated 5 out of 5 by from Fantastic Guitar Finish... I use the EW2K High-Gloss Clear for finishing the wood on guitars I restore. This finishing system works very well for this job. I applied the EW2K directly to the wood with no undercoats or primers. The finish goes on water-clear which helps show the beauty of the wood. It builds up very quickly and as a result, requires less finish to be applied. It cures to a hard finish that sands and polishes to a piano-like shine. I will continue to use EW2K for all my guitar restorations in the future.
Date published: 2018-12-03
Rated 5 out of 5 by from Worked great for me! I bought a can of this several years ago and never got around to using it until last weekend. This can had been sitting in a non climate controlled garage for a couple of years, at least 2 but more like 3 or 4. I just can't remember when I bought it. I decided to use it after sanding all the yellow out of my headlights. I got one done when it was kinda warm but the other I had to finish the following day. It was cloudy, windy and barely 50 degrees outside. It still sprayed good 24hrs after spraying the first one. It laid down nice and has a little flow out to it. I was really surprised it sprayed at all, much less 24hrs after it was mixed. I can't comment on the long term quality but I like what I see so far. I'm about to order some more to clear coat some interior parts on a project car I'm working on.
Date published: 2018-11-20
Rated 5 out of 5 by from great I used it over dupli color paint on a gas tank it worked so good I bought 4 more cans so I have it when I need it
Date published: 2018-11-09
Rated 5 out of 5 by from this stuff is amazing!!! we cleared the bottom of 1969 charger, i had my body guys shoot the paint and the clear. you would never know this product didn't come out of gun. simply amazing
Date published: 2018-10-04
Rated 5 out of 5 by from Amazing results over epoxy and enamel base coats I used this clear coat on a few small parts for a scooter to try it before I use it on something bigger. The first part was a panel I wanted white. For that I used 2K epoxy primer from Eastwood, then regular 1 part white epoxy as base coat and finished it with 3 coats of this 2K High Gloss Clear Coat. For the rear rack I did the same process, but used bright yellow enamel. I was curious to see if I would get some reaction from mixing enamel and epoxy, but the result has been amazing. It really looks and feels like a professional bodyshop job. So far has been very durable. I did sanded in between coats and since they were small parts, coats were generous.
Date published: 2018-09-18
Rated 5 out of 5 by from Excellent product The 2K product isn’t an excellent product, sprays very well & smooth. The only issue is it can’t be 5.00 less in cost.
Date published: 2018-08-01
Rated 5 out of 5 by from EW 2K AerosolHigh Gloss Clesr This is a good high gloss spray clear. the spray nozzle works like a professional spray gun.
Date published: 2018-07-18
Rated 5 out of 5 by from Excellent Nozzle technology These 2K can have some of the best nozzle technology. The paint always comes out consistent and smooth. The clear is thick and durable. One can should be able to cover a car door 2x.
Date published: 2018-06-18
Rated 5 out of 5 by from Outstanding paint! Worked like a charm! Other paints were not working out at all so I switched to Eastwoods paint. Used this paint to do the gas tank and it worked out great!
Date published: 2018-05-30
Rated 5 out of 5 by from I used this on my custom steering wheel. I purchased this clear coat finish about three months ago. I used for two coats of finish on the custom burl walnut steering wheel I built from scratch. After many hours of work I was a little nervous and in the end very happy with the result.
Date published: 2018-03-27
Rated 5 out of 5 by from As I expected Finish is glossy and smooth and blends very well .
Date published: 2018-01-17
Rated 5 out of 5 by from worked great got th e2k clear so i could go over my black gloss hi heat spray and frame paint for my bike . preped work area and masked up . process was easy if you have practice with a can . went on easy & looks great . after fully dried i put in sun and its hard shinny clear just like i wanted. no hazy spray no spatter or runs . I will most likely pick up a second can as i need to re clear a spoiler on the sion
Date published: 2017-11-07
  • y_2021, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasreviews, tv_3, tr_105
  • loc_en_US, sid_14792Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 19.37ms
  • REVIEWS, PRODUCT

Questions & Answers

is your two part clear gas proof for motorcycle tanks and frames?

Asked by: chris B
This clear is gas resistant, but like many paints is not recommended for prolonged exposure.
Answered by: ZachC
Date published: 2021-07-12

Can u is it on the gloss powder coating?

Asked by: Trigger
Once fully cured there should be no issues applying the 2k clear over powder.
Answered by: SeanW
Date published: 2021-06-08

Can you apply over raptor bed liner

Asked by: Frodtruck
You can spray Eastwood 2K Aerospray Clear Coat paints over the bed liner in your Ford Rapture but due to the flexible nature of spray-in bed liner we can not guarantee there will be a good long term bond between the 2K clear and the bed liner.
Answered by: vince
Date published: 2021-05-15

Can this be applied over epoxy paint that is fully cured.

Asked by: Daniel
This product has only been tested with our paints.
Answered by: SeanW
Date published: 2021-05-04

My polycarbonate/lexan boat windows originally had a protective clear coat that has worn away leaving the windows cloudy. Will your clearcoat applications, like for car headlights, provide a shiny see through surface ??

Asked by: Gregory
i dont recomend for that application
Answered by: eastwood alsip
Date published: 2021-09-23

Does this clear coat similar to High Impact clear? Looking for similar for a goalie mask.

Asked by: bladebarber615
This clear is designed for automotive use.
Answered by: SeanW
Date published: 2021-04-18

What is maximum recoat time, before full cure?

Asked by: Jima
18 hours.
Answered by: SeanW
Date published: 2021-04-12

Application for wood gunstock?

Asked by: MAMCBLLC
This product has never been tested directly on wood.
Answered by: SeanW
Date published: 2021-04-12

Which product to restore head light cover

Asked by: Claude
we would recommend the gloss clear.
Answered by: SeanW
Date published: 2021-04-05

At the suggestion of an Autozone "salesman" I used Mr Clean pads and Bug and Tar remover on specific areas. Disaster! The cleaning pads were abrasive enough to remove the clear coat on the Tacoma Super White paint! They are now flat white. Help!

Asked by: Anonymous
You will need to thoroughly clean the panel with a grease, wax, silicone remover such as Eastwood's Pre Painting Prep(10041Z). Then scuff/sand the panel to promote adhesion. Wipe the panel again with Pre Painting Prep. Activate the 2K Gloss Clear Aerosol, then apply 1-2 coats with a 50 percent over lap. Allow 3-7 minutes between coats. This Clear spray should fully cure in 12 hours. It can be sanded and buffed.
Answered by: vince
Date published: 2021-03-24

Can I use the 2k clear aresol on your single stage paint ? 

Asked by: Jose
Yes you can use Eastwood's 2K clear over single stage paint. If the single stage paint has fully cured you will need to scuff the surface to promote a strong bond.
Answered by: vince
Date published: 2021-02-13

I have a bare metal gas tank on my mc id like to protect. I read the answer to a previous question that said this isn't for bare metal and recommended The Eastwood Diamond Clear High Gloss paint(16105Z). Can I layer them so I can protect against gas drip

Asked by: Greg
Yes you can spray Eastwood's 2K Clear High Gloss or Matte(14148Z) over Eastwood's Diamond Clear(16105Z). Allow proper flash time between coats for best application. If the Diamond clear is allowed to fully cure before applying the 2K clear you may want to scuff the surface to promote bonding strength.
Answered by: vince
Date published: 2021-07-08

I have 4 brand new American Racing aluminum rims with a charcoal finish on the spokes will this adhere to the finish and how much coverage will I get out of one can . I have my Concurs spray gun but my compressor is not hooked up yet so I need alternative

Asked by: Toms 72
We technically can not guarantee compatibility between our products and products we do not sell so we would have to advise you to test a small area first. You would want to abrade with 600 grit, clean and degrease and then apply.
Answered by: Kelly H
Date published: 2021-01-09

I have a mix of paint and bare metal ie. Patina finish on an interior of a cab that I am interested in finishing. What will happen if this paint gets sprayed to a minimum amount of bare metal?

Asked by: Paul
The Eastwood 2K aerosol Paints are not (DTM) Direct to Metal paints and need to be applied over an appropriated primer base or a properly prepared existing painted surface. The bond strength in the bare metal areas can not be guaranteed. The Eastwood Diamond Clear High Gloss paint(16105Z) is a Direct to Metal(DTM finish and will work on bare metal applications.
Answered by: vince
Date published: 2021-02-01

Just to be certain, would the 2X clear spray be appropriate for rechromed-over-steel 1997-ish Dodge Ram wheels? Or would a different product work better?

Asked by: Restoring Truck Guy
The Eastwood 2K clear spray paint is not a DTM (direct to metal) paint. It should be sprayed over a primed or pre-painted surface. It is recommended to use the Eastwood Diamond clear Gloss Spray Paint(16105Z) as this is a DTM(direct to metal paint. The surface should be thoroughly cleaned with Eastwood's Pre Painting Prep spray(10041Z) before application.
Answered by: vince
Date published: 2020-12-29

Rebuilding ABS plastic dashboard from a 1997 Dodge Ram. Will matte clear adhere to unpainted ABS? Will it adhere to DuPont or other flat/matte interior paint without problems? Suggestions welcome!

Asked by: Restoring Truck Guy
Yes the Matte Clear(14792) will adhere to unpainted ABS plastic but it is recommended to use an adhesion promoter such as BULLDOG Adhesion Promoter spray (15279Z) or SEM Plastic Adhesion Promoter(52366Z). You should do a test spray out of the 2K matte clear over the base paint you will be using. Do not spray the 2K matte clear Urethane over lacquer based paint.
Answered by: vince
Date published: 2020-12-29

Can I use this on a gas tank to keep it from rusting and keep the original metal look. So it would bare metal I’m spraying it on. 

Asked by: 67nova
I'm looking for a clear coat that gasoline won't melt if I spill a little gas on it while filling the tank on my motorcycle. I'm going to be paint it over a painted gas tank.
Answered by: MotoGuzzi1
Date published: 2021-05-20

I’m using galvanized plumbing pipes for a shelving unit.  The galvanized is a bit too shiny and I’m looking to top coat it with a matte clear coat for a duller appearance.  Is this the right product?

Asked by: JulieS
Eastwoods 2K Matte Clear(14792Z) although a high Quality paint, is not rated as a Direct to Metal paint. The Eastwood Diamond Clear Satin (16106Z) is a DTM or Direct to metal Clear finish that is formulated to spray on bare metal. it is recommend to thoroughly cleaning the metal parts with Eastwood Pre Painting Prep(10041Z) before applying the clear coat.
Answered by: vince
Date published: 2020-12-16

Can I use 2k gloss clear for the inside of my alloy rims the barrel its factor painted Will the wheel weights still stick to the 2k gloss . Looking to gloss it up a bit its dull i an painting the front with 2k chassis black and 2k gloss clear .

Asked by: Daniel
This product can certainly be used for that application.
Answered by: SeanW
Date published: 2020-10-20

Will the 2k aerospray matte clear provide UV protection over an epoxy fiberglass surface?

Asked by: Zack
This product would provide UV protection.
Answered by: SeanW
Date published: 2021-07-24

Will the K2 matte clear Work on carbon fiber ?

Asked by: David55
This is compatible with carbon fiber.
Answered by: SeanW
Date published: 2020-10-07

Is the matte 2k clear coat recommended for application with the 2k epoxy paint? Can the gloss clear coat be used with the matte finish 2k epoxy paint?

Asked by: kmcg
This can certainly be applied over epoxy primer as a finish.
Answered by: SeanW
Date published: 2021-07-24

I have some small areas to finish up my car. I used your 4:1 low voc clear and ran out. Is this 2k compatible with the 4:1 ? Really don't want to buy another gallon of the 4:1.

Asked by: gbfab
This is compatible with our 4 to 1 clear coat.
Answered by: SeanW
Date published: 2020-09-21

Does the 2k AeroSpray Clear have a built in flex agent?

Asked by: Donnie Mac
This does not have a built-in flex agent.
Answered by: SeanW
Date published: 2020-09-11

Can this be used under a wood burning stove?

Asked by: lspilotros
We would not recommend using this product for the application in reference.
Answered by: Kelly H
Date published: 2020-08-22

When you add the two mixture do you have to use the hole can?  I’ve got different things that I cannot do all at once. 

Asked by: Joey
Once activated this can has a 48 hour pot life.
Answered by: Kelly H
Date published: 2020-08-07

Can it be use on bare aluminum.

Asked by: Pauly
This can be used on bare aluminum.
Answered by: NickC
Date published: 2021-04-08

once used and can not fully empty can it still be used at a later time or is it intended for 1 time use?

Asked by: will
The pot life of the can once activated is 48 hours. We have had luck extending the pot life to a few days by storing the activated can in a cold environment.
Answered by: NickC
Date published: 2020-08-11

Can this be sprayed over products like krylon?

Asked by: BigKeith91
We do not recommend using any of products in conjunction with Krylon.
Answered by: Kelly H
Date published: 2020-07-05

Can this be used over fresh powder coating to help prevent chipping? 

Asked by: Mschullstrom
Yes, this can be applied to fully cured and scuffed up powder- so that it bonds properly to the surface.
Answered by: Kelly H
Date published: 2020-06-27
  • y_2021, m_10, d_19, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_254
  • loc_en_US, sid_14792Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 82.92ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Eastwood 2K Aerospray Matte Clear - Aerosol - 11.8oz
$27.99
In Stock