Item # 14792Z BRAND: Eastwood

Eastwood 2K AeroSpray Spray Paint Matte Clear Coat Aerosol Spray Paint

2K Aerospray™ Matte Clear
2K Aerospray™ Matte Clear
Eastwood 2K AeroSpray Spray Paint Matte Clear Coat Aerosol Spray Paint is rated 4.7 out of 5 by 148.
  • y_2023, m_6, d_6, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_3, bvpage2n
  • co_hasreviews, tv_19, tr_129
  • loc_en_US, sid_14792Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 136.39ms
Save for Later
2K Aerospray™ Matte Clear

90 day Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Eastwood 2K AeroSpray Spray Paint Matte Clear Coat Aerosol Spray Paint

Product Overview:


Eastwood 2K Matte Clear Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.

  • 2-Component Catalyzed Technology
  • Two Chamber Design Aerosol
  • Most Durable Aerosol Clearcoat Available
  • Sprays Like a Paint Gun

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.


90 Day


In the Box


11.8 ounces net weight

Guides & Accessories

Safety Information

Always wear eye, skin and respiratory protection when using this product.Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


10041Z PRE Painting Prep.
12196Z Chassis Kleen,
14149Z 2K Epoxy Primer.
16060Z Rust Encapsulator.
51483Z Rust Converter.
12846Z Aerosol Injected Cleaner.
11456 Respirator

Application Tips

Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life 48 hours at 68 degrees.


Rated 5 out of 5 by from Great Clear Coat Great product! Went on well and no gun clean up when finished. Make sure you need all the product because it does not have much shelf life after mixing.
Date published: 2021-06-30
Rated 5 out of 5 by from 2k today I was introduced to 2K back in the mid 2000's at Laconia Bike week .It was then when I airbrushed the blue fire and flames on Ricks tourng Helicopter which gave rides for the bike event..Awesome convenience and quality in a can no less. just want to say thankyou Eastwood
Date published: 2021-06-29
Rated 5 out of 5 by from 2K Aerosol High Gloss Works Worked great over Alumina. Blow out the valve after each coat so the next coat doesn't sputter. You blow it out by inverting the can and spraying until paint doesn't come out.
Date published: 2021-06-05
Rated 5 out of 5 by from Great Product The product was as described. Great matte finish which matched the factory matte finish unbleivably. The tip delivers an even spray allowing easy application.
Date published: 2021-06-01
Rated 5 out of 5 by from 2K Matte Clear Over 2K Rat Rod Matte The 2K paint worked great with the 2K matte black topcoat. One caveat, however, If you're using the same can for two different coats, with a 30 minute break, blow out the valve after the first coat so the second coat doesn't sputter. You blow it out by inverting the can and spraying until paint doesn't come out.
Date published: 2021-05-29
Rated 5 out of 5 by from worked perfectly Exactly what I needed, great flow, loved the gun-like spray. I read, re-read and re-read the can a couple times and checked the website to make sure I was doing everything right. Great product, will buy again.
Date published: 2021-05-04
Rated 5 out of 5 by from Worth it x10000000000 After going through a few cans of duplicolor clear while repainting my bumper I was researching like crazy how to make it shiny with buffing and everything. Finally I saw someone say it’s your clear coat and they suggested this. I was hesitant because it’s three times the price but decided it was worth a shot. I knew immediately I made the right decision. This clear coat is actually glossy even before buffing and polishing. I’m sure once you do that it’s even more beautiful! It’s 1000% worth the extra money over duplicolor clear coat. If you are feeling like your top coat hasn’t no shine and frustrated as H$&! Try this!!!
Date published: 2020-10-28
Rated 5 out of 5 by from 2K clear coat aerosol cans this 2K clear is the best I tried spraymax which is a good product , but it leaves a lot of orange peel. Eastwood seems not to leave to much orange peel , .. it's fantastic...
Date published: 2019-09-06
Rated 5 out of 5 by from 2k clear coat in spray can excellant clear coat ! I think the 2k arosol does a better job than using air gun!
Date published: 2019-05-11
Rated 5 out of 5 by from 2K clear coat aerosol cans Man , this is the best 2K clear in a can by far ,it not five stars its ten stars an some.. hardly leaves any over spray .Great product..
Date published: 2019-04-05
Rated 5 out of 5 by from Love the matte clear coat! I am reviewing the matte clear coat finish. I had some flaws (deep sanding marks in my primer that I was unable to remove. I had issues with the paint dripping on my motorcycle fuel tank (first time to use HVLP, but adjusted the gun setting and the rear fender was painted flawlessly) and decided to run a stripe of the matte on a scratched area of my tank after seeing how the clear coat had hidden under seat scratches on the fender. It completely hid those scratches! I love how well this product works, and how nice the clear coat looks after being applied! I will definitely be buying more for future projects!
Date published: 2019-03-25
Rated 5 out of 5 by from Better than expected 2K clear coat. I take old guitars and give them new live and your 2K clear coat gives a deep/hard mirror like finish, really brings out the color of the paint. Very easy to use.
Date published: 2019-02-21
Rated 5 out of 5 by from Great Product. Highly recommended I normally don't write reviews, but I was blown away by this product. Normally it's all marketing, but this really does spray like a gun. It's worth the price. Leave a high gloss shine that looks like it's from a gun.
Date published: 2019-01-29
Rated 5 out of 5 by from Amazing Product Love this product and the shipping was REALLY FAST!! Will never buy from anyone else from now on.
Date published: 2019-01-24
Rated 5 out of 5 by from Good duplicolor overcoat I bought this specifically to over coat the duplicolor paint on my motorcycle gas tank. I used this with no signs of damage to the bottombase coat or lacquer matte previously painted. Very pleased with coverage and durability.
Date published: 2019-01-18
Rated 5 out of 5 by from Fantastic Guitar Finish... I use the EW2K High-Gloss Clear for finishing the wood on guitars I restore. This finishing system works very well for this job. I applied the EW2K directly to the wood with no undercoats or primers. The finish goes on water-clear which helps show the beauty of the wood. It builds up very quickly and as a result, requires less finish to be applied. It cures to a hard finish that sands and polishes to a piano-like shine. I will continue to use EW2K for all my guitar restorations in the future.
Date published: 2018-12-03
Rated 5 out of 5 by from Worked great for me! I bought a can of this several years ago and never got around to using it until last weekend. This can had been sitting in a non climate controlled garage for a couple of years, at least 2 but more like 3 or 4. I just can't remember when I bought it. I decided to use it after sanding all the yellow out of my headlights. I got one done when it was kinda warm but the other I had to finish the following day. It was cloudy, windy and barely 50 degrees outside. It still sprayed good 24hrs after spraying the first one. It laid down nice and has a little flow out to it. I was really surprised it sprayed at all, much less 24hrs after it was mixed. I can't comment on the long term quality but I like what I see so far. I'm about to order some more to clear coat some interior parts on a project car I'm working on.
Date published: 2018-11-20
Rated 5 out of 5 by from great I used it over dupli color paint on a gas tank it worked so good I bought 4 more cans so I have it when I need it
Date published: 2018-11-09
Rated 5 out of 5 by from this stuff is amazing!!! we cleared the bottom of 1969 charger, i had my body guys shoot the paint and the clear. you would never know this product didn't come out of gun. simply amazing
Date published: 2018-10-04
Rated 5 out of 5 by from Amazing results over epoxy and enamel base coats I used this clear coat on a few small parts for a scooter to try it before I use it on something bigger. The first part was a panel I wanted white. For that I used 2K epoxy primer from Eastwood, then regular 1 part white epoxy as base coat and finished it with 3 coats of this 2K High Gloss Clear Coat. For the rear rack I did the same process, but used bright yellow enamel. I was curious to see if I would get some reaction from mixing enamel and epoxy, but the result has been amazing. It really looks and feels like a professional bodyshop job. So far has been very durable. I did sanded in between coats and since they were small parts, coats were generous.
Date published: 2018-09-18
Rated 5 out of 5 by from Excellent product The 2K product isn’t an excellent product, sprays very well & smooth. The only issue is it can’t be 5.00 less in cost.
Date published: 2018-08-01
Rated 5 out of 5 by from EW 2K AerosolHigh Gloss Clesr This is a good high gloss spray clear. the spray nozzle works like a professional spray gun.
Date published: 2018-07-18
Rated 5 out of 5 by from Excellent Nozzle technology These 2K can have some of the best nozzle technology. The paint always comes out consistent and smooth. The clear is thick and durable. One can should be able to cover a car door 2x.
Date published: 2018-06-18
Rated 5 out of 5 by from Outstanding paint! Worked like a charm! Other paints were not working out at all so I switched to Eastwoods paint. Used this paint to do the gas tank and it worked out great!
Date published: 2018-05-30
Rated 5 out of 5 by from I used this on my custom steering wheel. I purchased this clear coat finish about three months ago. I used for two coats of finish on the custom burl walnut steering wheel I built from scratch. After many hours of work I was a little nervous and in the end very happy with the result.
Date published: 2018-03-27
Rated 5 out of 5 by from As I expected Finish is glossy and smooth and blends very well .
Date published: 2018-01-17
Rated 5 out of 5 by from worked great got th e2k clear so i could go over my black gloss hi heat spray and frame paint for my bike . preped work area and masked up . process was easy if you have practice with a can . went on easy & looks great . after fully dried i put in sun and its hard shinny clear just like i wanted. no hazy spray no spatter or runs . I will most likely pick up a second can as i need to re clear a spoiler on the sion
Date published: 2017-11-07
Rated 5 out of 5 by from Great option for small repairs! I used this to touch up a bumper with peeling clear coat, and also used it to refinish a set of headlights (after wetsanding the yellowed coating off) and also refinish a pair of wheels with checked clear coat. I wasn't expecting perfection as these are daily driven cars, but I'm impressed with the results. IT TAKES A LONG TIME TO CURE, but once it does, it appears to be very durable. It's also very forgiving and lays smooth without runs. Recommend 100%
Date published: 2017-08-01
Rated 5 out of 5 by from Great results The tail gate on my Dodge RAM was looking BAD... a poor paint job from a previous owner had the clear coat failed miserably, so I figured I couldn't make it look worse. I sanded down the tailgate, sprayed fresh primer, a few cans of color matching PS2 silver and then two cans of 2K Clear, and I'm totally happy with the results. Two cans was enough to give 4 coats over the whole tailgate. Easy to use, nice spray pattern. The only negative was the spray tip on one of the cans arrived broken, but I was able to pull out the broken piece and use the good tip from the other can. Pleased with the results, I'm going to redo a side fender next!
Date published: 2017-05-10
Rated 5 out of 5 by from This was my first time using this product! The application was very easy. This is was the first time I ever clear coat anything, but after watching a few videos about applying and how far to hold the can from your surface this product really shined! LITERALLY! I would use this again and again! For the best results I recommend using this product indoors like a garage or shop, also wear a CHEMICAL MASK! Always be safe. I've attached some photos of my front bumper I just finished painting and clear coating. I have to say this product is amazing!
Date published: 2016-09-27
  • y_2023, m_6, d_6, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_3, bvpage2n
  • co_hasreviews, tv_19, tr_129
  • loc_en_US, sid_14792Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 19.78ms

Questions & Answers

Can I use this on a gas tank to keep it from rusting and keep the original metal look. So it would bare metal I’m spraying it on. 

Asked by: 67nova
I'm looking for a clear coat that gasoline won't melt if I spill a little gas on it while filling the tank on my motorcycle. I'm going to be paint it over a painted gas tank.
Answered by: MotoGuzzi1
Date published: 2022-12-28

I’m using galvanized plumbing pipes for a shelving unit.  The galvanized is a bit too shiny and I’m looking to top coat it with a matte clear coat for a duller appearance.  Is this the right product?

Asked by: JulieS
Eastwoods 2K Matte Clear(14792Z) although a high Quality paint, is not rated as a Direct to Metal paint. The Eastwood Diamond Clear Satin (16106Z) is a DTM or Direct to metal Clear finish that is formulated to spray on bare metal. it is recommend to thoroughly cleaning the metal parts with Eastwood Pre Painting Prep(10041Z) before applying the clear coat.
Answered by: vince
Date published: 2020-12-16

Can I use 2k gloss clear for the inside of my alloy rims the barrel its factor painted Will the wheel weights still stick to the 2k gloss . Looking to gloss it up a bit its dull i an painting the front with 2k chassis black and 2k gloss clear .

Asked by: Daniel
This product can certainly be used for that application.
Answered by: SeanW
Date published: 2020-10-20

Will the 2k aerospray matte clear provide UV protection over an epoxy fiberglass surface?

Asked by: Zack
This product would provide UV protection.
Answered by: SeanW
Date published: 2021-07-24

Will the K2 matte clear Work on carbon fiber ?

Asked by: David55
This is compatible with carbon fiber.
Answered by: SeanW
Date published: 2020-10-07

Is the matte 2k clear coat recommended for application with the 2k epoxy paint? Can the gloss clear coat be used with the matte finish 2k epoxy paint?

Asked by: kmcg
This can certainly be applied over epoxy primer as a finish.
Answered by: SeanW
Date published: 2021-07-24

I have some small areas to finish up my car. I used your 4:1 low voc clear and ran out. Is this 2k compatible with the 4:1 ? Really don't want to buy another gallon of the 4:1.

Asked by: gbfab
This is compatible with our 4 to 1 clear coat.
Answered by: SeanW
Date published: 2020-09-21

Does the 2k AeroSpray Clear have a built in flex agent?

Asked by: Donnie Mac
This does not have a built-in flex agent.
Answered by: SeanW
Date published: 2020-09-11

Can this be used under a wood burning stove?

Asked by: lspilotros
We would not recommend using this product for the application in reference.
Answered by: Kelly H
Date published: 2020-08-22

When you add the two mixture do you have to use the hole can?  I’ve got different things that I cannot do all at once. 

Asked by: Joey
Once activated this can has a 48 hour pot life.
Answered by: Kelly H
Date published: 2020-08-07

Can it be use on bare aluminum.

Asked by: Pauly
This can be used on bare aluminum.
Answered by: NickC
Date published: 2021-04-08

once used and can not fully empty can it still be used at a later time or is it intended for 1 time use?

Asked by: will
The pot life of the can once activated is 48 hours. We have had luck extending the pot life to a few days by storing the activated can in a cold environment.
Answered by: NickC
Date published: 2020-08-11

Can this be sprayed over products like krylon?

Asked by: BigKeith91
We do not recommend using any of products in conjunction with Krylon.
Answered by: Kelly H
Date published: 2020-07-05

Can this be used over fresh powder coating to help prevent chipping? 

Asked by: Mschullstrom
Yes, this can be applied to fully cured and scuffed up powder- so that it bonds properly to the surface.
Answered by: Kelly H
Date published: 2020-06-27

Can this be wet sanded and polished?

Asked by: nonpoint505
Yes, this can be wet sanded and polished without issues.
Answered by: Kelly H
Date published: 2020-09-10

will it work on guitar bare wood ?

Asked by: jpoole
This would be a perfect clear to use on a bare wood guitar for a super glossy and durable finish. Since wood tends to absorb paint it is recommended to put on 2-3 initial coats and let cure. Then wet sand smooth and apply 3 more coats for the smoothest finish possible.
Answered by: Scott C
Date published: 2020-07-12

Used the 2k Matte Clear today over some Eastwood single stage urethane. Seemed to go on great and looks good but feels rough to the touch. Is this normal?   Conditions were good in the low 80’s with low humidity. Shot from about 12”.  Light sand and buff?

Asked by: Rolsdas
This could be a few things. Too little overlap when spraying could cause dry spray as well as the way you traveled across the panel when spraying. If the "roughness" is orange peel it could be the travel speed or distance you were from the panel when spraying. Matte Clear can be sanded and buffed but it won't be matte anymore and will get shiny. You could lightly sand the last coat and spray a drop coat over the surface focusing on your travel speed, overlap, and distance off the panel when spraying. Possibly spray out some test panels first to assure you have your technique down.
Answered by: MattM
Date published: 2020-06-05

Your clear 2k aerosols, can they be used on vintage pre-painted aluminum hud caps, I have 1977 chevy C10 hub caps I want to clear coat?

Asked by: Johnski
We can not guarantee compatibility with products we do not sell. we would have to advise you to test a small area first.
Answered by: Kelly H
Date published: 2020-05-29

Does this clear have acetone in it? I have a mailbox with custom pin striping and he used a synthetic urethane paint. I’m looking for an aerosol enamel or urethane that doesn’t have any acetone.  

Asked by: Kyle
This clear contains Acetone. We apologize for the inconvenience.
Answered by: Kelly H
Date published: 2020-05-29

I'm planning on vinyl wrapping my car. I'm currently blending my fender flares to the car once I have the body work done I was going to use your 2K Epoxy Primer over the top. Will this 2K High-Gloss and Matte Clear work on top of the 2K Epoxy Primer?

Asked by: Peter
An actual topcoat/ base paint is recommended to be applied prior to our clear coat in reference.
Answered by: Kelly H
Date published: 2020-05-24

I'm looking to clear coat a steel bicycle frame. Can I use this on bare metal and what preparation should I do first?

Asked by: Scott
This clear can not be applied to bare metal. The only bare metal clears that we offer are our Diamond Clear and the Exo Armour.
Answered by: Kelly H
Date published: 2020-05-21

Is this product has resistant?

Asked by: taysey22471
Max Temperature: Paint will handle up to 250-300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
Answered by: Scott C
Date published: 2020-05-19

I repainted my motorcycle helmet and I need a clear coat that is strong and durable, but will not damage the paint or discolor. Will this product be a good fit or is there something else recommended?

Asked by: Wagner87
Our 2k aerospray clear coats are a perfect way to add automotive grade paints to smaller projects such as a motorcycle helmet.
Answered by: Scott C
Date published: 2020-07-12

How many coats of 2K glossy is normal for replacing the clear on a 2006 car?

Asked by: Dave
I would say anywhere between 2-4 coats would be considered standard for application.
Answered by: Kelly H
Date published: 2020-05-03

I plan on removing some rust spots on my Harley frame and coating the bare metal portions with epoxy primer. I want to take this gloss clear and cover the entire frame (the fixed areas and factory powder coat). Will this work?

Asked by: WaterBoy
This will work in your application, but make sure you scuff sand the powder coat to give enough tooth for this to adhere.
Answered by: NickC
Date published: 2020-05-03

can i spray my polished aluminum intake - water pump and polished alumium valve covers. with the 2k high gloss clear coat.?

Asked by: hotrod mike 1936
Our 2K Aerosol clears are not designed to bond with bare metal. We do however had our Exo Amour (Part number 15350z) which would be perfect for the areas you're describing.
Answered by: Scott C
Date published: 2020-05-01

I'm using your EASTWOOD UNDERHOOD BLACK® MATTE AEROSOL as my base: since it's your own product can you confirm that I can use this clear coat over that particular lacquer? I already have both, but haven't sprayed the base yet.

Asked by: flooglehorn
Yes you should be able to do that just make that the under hood black is fully cured before applying a clear coat.
Answered by: MattM
Date published: 2020-04-29

How is the UV resistance in the gloss clear product? I have fiberglass end cap of an RV that won't hold it's gloss that I am thinking about applying.

Asked by: Campy
This is a catalyzed 2K automotive grade clear coat that is made to withstand UV exposure. It would work well for your project.
Answered by: MattM
Date published: 2020-04-29

I have a 2014 Honda Valkyrie with the factory waterbase clearcoat. The clearcoat is very soft and marks easily. Can this clearcoat be applied over the old clearcoat? If so, what process do I need to do?

Asked by: Brian
You will need to scuff the old clear with 400-600 grit sandpaper and wipe it clean. You can topcoat the 2k clear on top of it.
Answered by: SeanW
Date published: 2020-04-24

Can this be applied at any time after painting like 2-5 days or even later ? Or does the paint need to be tacky .

Asked by: Danio
If applying after the cure time you will want to lightly scuff for adhesion.
Answered by: ZachC
Date published: 2020-04-22
  • y_2023, m_6, d_6, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_272
  • loc_en_US, sid_14792Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 132.03ms
We found other products you might like!
Eastwood 2K AeroSpray Spray Paint Matte Clear Coat Aerosol Spray Paint
In Stock